In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol
V
CC
V
I
I
IK
I
SK
V
SW
I
SW
I
CC
I
GND
T
stg
P
tot
Parameter
supply voltage
input voltage
input clamping current
switch clamping current
switch voltage
switch current
supply current
ground current
storage temperature
total power dissipation
T
amb
= -40 °C to +125 °C
[3]
[1]
Conditions
Min
-0.5
-0.5
-50
-
[2]
Max
+6.5
+6.5
-
±50
V
CC
+ 0.5
±50
100
-
+150
250
Unit
V
V
mA
mA
V
mA
mA
mA
°C
mW
V
I
< -0.5 V or V
I
> V
CC
+ 0.5 V
V
I
< -0.5 V or V
I
> V
CC
+ 0.5 V
enable and disable mode
V
SW
> -0.5 V or V
SW
< V
CC
+ 0.5 V
-0.5
-
-
-100
-65
-
[1] The minimum input voltage rating may be exceeded if the input current rating is observed.
[2] The minimum and maximum switch voltage ratings may be exceeded if the switch clamping current rating is observed.
[3] For TSSOP8 packages: above 55 °C the value of P
tot
derates linearly with 2.5 mW/K.
For VSSOP8 packages: above 110 °C the value of P
tot
derates linearly with 8.0 mW/K.
For XSON8 and XQFN8 packages: above 118 °C the value of P
tot
derates linearly with 7.8 mW/K.
9
Recommended operating conditions
Parameter
supply voltage
input voltage
switch voltage
ambient temperature
input transition rise and fall rate
V
CC
= 1.65 V to 2.7 V
V
CC
= 2.7 V to 5.5 V
[2]
[2]
[1]
Table 6. Operating conditions
Symbol
V
CC
V
I
V
SW
T
amb
Δt/ΔV
Conditions
Min
1.65
0
enable and disable mode
0
-40
-
-
Max
5.5
5.5
V
CC
+125
20
10
Unit
V
V
V
°C
ns/V
ns/V
[1] To avoid sinking GND current from terminal Z when switch current flows in terminal Yn, the voltage drop across the bidirectional switch must not exceed
0.4 V. If the switch current flows into terminal Z, no GND current will flow from terminal Yn. In this case, there is no limit for the voltage drop across the
switch.
[2] Applies to control signal levels.
74LVC1G53
All information provided in this document is subject to legal disclaimers.
京公网安备 11010802033920号
EEWORLD
