performance oscillators utilizes a proven silicon MEMS
technology to provide excellent jitter and stability over
a wide range of supply voltages and temperatures. By
eliminating the need for quartz or SAW technology,
MEMS oscillators significantly enhance reliability and
accelerate product development, while meeting
stringent clock performance criteria for a variety of
communications, storage, and networking applications.
DSC1103 has a standby feature allowing it to
completely power-down when EN pin is pulled low. For
DSC1123, only the outputs are disabled when EN is
low. Both oscillators are available in industry standard
packages, including the smallest 2.5 mm x 2.0 mm,
and are drop-in replacements for standard 6-pin LVDS
crystal oscillators.
Block Diagram
Pin 1
Enable
Temp. Sensor &
Compensation
Circuitry
MEMS
Oscillator
Divider
Driver
Pin 6
V
DD
Pin 2
NC
PLL
Pin 5
Output
Applications
• Storage Area Networks
- SATA, SAS, Fibre Channel
• Passive Optical Networks
- EPON, 10G-EPON, GPON, 10G-PON
• HD/SD/SDI Video and Surveillance
• PCI Express Gen 1/Gen 2/Gen 3
• Display Port
Pin 3
GND
Pin 4
Output
2017-2018 Microchip Technology Inc.
DS20005745B-page 1
DSC1103/23
1.0
ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings †
Supply Voltage .......................................................................................................................................... –0.3V to +4.0V
Input Voltage .......................................................................................................................................–0.3V to V
The PWM function is in the pulseio module. It is also very easy to use, such as:import pulseio
import boardpwm = pulseio.PWMOut(board.D13, frequency=50)
pwm.duty_cycle = 2 ** 15The duty cycle of the P...
As shown in the figure, this is a constant current source circuit composed of two operational amplifiers. Let's discuss the designer's design ideas, that is, how to design it!...
[i=s]This post was last edited by dql2016 on 2021-4-25 18:59[/i]I don't have much knowledge about Bluetooth yet, so I can only run the official routine to see the effect. The routine I tested is this:...
dql2016onsemi and Avnet IoT Innovation Design Competition
If the ultimate form of a car is a silicon-based life form, then in
the field of
intelligent driving
, it has gradually taken on the appearance of a "veteran driver." In
the field of
the ...[Details]
On August 23rd, Geely's subsidiary, Jiyao Tongxing, announced it has the industry's largest advanced production capacity for tandao
batteries
, with eight production bases across China. Jiy...[Details]
The problem of dynamic sealing of equipment always exists with the operation of the equipment. Today, we have specially sorted out the various commonly used sealing forms, usage scope and character...[Details]
When you are happily watching NBA or football, your wife asks you to turn off the lights in the bedroom. Would you be depressed? Of course, unless you are not afraid of your wife.
Now you are ...[Details]
With the continuous development of the industrial automation industry, we are seeing an increasing number of intelligent devices using flexible, efficient, and precise robotic arms to p...[Details]
Civilian internal combustion engines operate in the range of approximately 1000-4000 rpm. This results in the engine's kinetic energy being ineffective at low or high rpm, making starting difficult...[Details]
Wearable technology is taking off, with applications evolving rapidly, from smartwatches to fitness trackers and even smart wigs! Bluetooth Smart is at the center of this revolution. This is the se...[Details]
The fracture mechanism is stress concentration, which typically occurs at the capacitor lead pins or pad connection points, as shown in the figure. Under vibration, the capacitor lead pins and pad ...[Details]
Batteries are a core component of new energy vehicles, accounting for over 40% of the total cost. This is also the area where automakers are most willing to tamper with costs. Since 2021, domestic ...[Details]
For the average person, an electricity meter is a monthly bill. For beginners, it's a collection of components and parts. For experienced meter engineers, however, it's a complex and complex proces...[Details]
The transition to SDVs (software-defined vehicles) involves more than just replacing parts; rather, it involves the organic connection of various elements, from internal vehicle systems to ext...[Details]
01 Overview
The HJM315A/B is a domestically produced programmable three-phase motor driver specifically designed for small and medium-sized motor gyroscopes. It consists of an MCU, LDO, three-...[Details]
The number of new energy vehicles in use is increasing, and there are multiple choices available. New energy vehicles can be divided into hybrid and pure electric, and the types of hybrid include m...[Details]
System Principle
According to the average imbalance rate of the branch three-phase phase line load and the average value of the branch phase line current, the adjustment of the phase line load...[Details]
August 19, 2025 – Mouser Electronics, a leading New Product Introduction (NPI) distributor offering an extensive portfolio of semiconductors and electronic components, announced that
it will be...[Details]
MicroPython Open Source section
京公网安备 11010802033920号
EEWORLD
