M39003/03-4029/HSD datasheet, PDF

Datasheet> All Categories > Passive components> M39003/03-4029/HSD

M39003/03-4029/HSD: DescriptionCAP TANT 470UF 10% 10V AXIAL; CategoryPassive components; File Size90KB，6 Pages; ManufacturerVishay; Websitehttp://www.vishay.com

Download Datasheet Parametric View All

M39003/03-4029/HSD Overview

CAP TANT 470UF 10% 10V AXIAL

M39003/03-4029/HSD Parametric

Parameter Name	Attribute value
capacitance	470µF
Tolerance	±10%
Voltage - Rated	10V
type	seal
ESR (equivalent series resistance)	-
Operating temperature	-55°C ~ 125°C
Service life at different temperatures	-
Installation type	Through hole
Package/casing	Axial
size/dimensions	0.351" diameter x 0.786" length (8.92mm x 19.96mm)
Height - Installation (maximum)	-
lead spacing	-
Manufacturer size code	D
characteristic	military
failure rate	D（0.001%）
notify	QPL or military specifications are for reference only. Non-military parts. See terms and conditions.

Preview

Download Datasheet

View All

M39003/03

www.vishay.com

Vishay Sprague

Solid-Electrolyte T

ANTALEX

™ Capacitors,

Military MIL-PRF-39003/03 Qualified, Style CSR23

FEATURES

• Hermetically sealed

• Metal cased

• Axial lead

• Weibull failure rates B, C, D

• Exponential failure rates M, P, R, S

• Tape and reel available per EIA-296 standard

PERFORMANCE CHARACTERISTICS

Operating Temperature:

-55 °C to +125 °C

(above 85 °C, voltage derating is required)

Capacitance Range:

1.2 μF to 1000 μF

Capacitance Tolerance:

± 5 %, ± 10 %, ± 20 %

Voltage Rating:

6 V

to 50 V

STYLE, MILITARY SPECIFICATION SHEET

Style CSR23, M39003/03

MIL-PRF-39003/3

DESCRIPTION

Solid-electrolyte

ANTALEX

capacitors

military

specification MIL-PRF-39003 - Exponential and Weibull

Distribution: hermetically sealed, metal cased, axial leaded

tubular capacitors manufactured as military style CSR23.

These capacitors are furnished to the requirements of the

military specification, including marking, testing and

inspection.

In accordance with the specification, all capacitors are

marked with the military part number (M39003/xx-xxxx)

rather than the older style designation (CSRxxxxxxxx) and

should be ordered as such. All capacitors covered by

MIL-PRF-39003 are now ordered with the military part

number as illustrated in the Part Numbering System chart.

Capacitors must not be ordered using the style number

identification.

MIL-PRF-39003 establishes failure rates (expressed in

percent per 1000 h) based on exponential and Weibull

distribution. Care must be exercised in ordering to insure the

part number correctly identifies the desired failure rate level.

In addition, each order for military style CSR13, CSR21,

CSR23 capacitors requiring government inspection must

state whether inspection is to be at the destination or at the

Vishay Sprague plant. Orders requiring source inspection

cannot be shipped until this has been accomplished.

Style CS13 capacitors previously shown in MIL-C-26655 are

directly replaced by style CSR13 and style CSR23

capacitors are extended capacitance range versions of

military style CSR13.

For information on the performance characteristics of these

capacitors, please refer to the latest issue of the military

specification.

ORDERING INFORMATION

M39003

BASIC

DOCUMENT NUMBER

Indicates the Basic

Specification; in this

case MIL-PRF-39003

/03

SLASH SHEET

Indicates the

Specification Sheet

of the Basic Military

Specification

-2046

DASH NUMBER

Taken from Ratings

table of the

Specification Sheet

SURGE CURRENT

OPTION LETTER

Blank = standard

(no surge current)

A = +25 °C,

after Weibull

B = -55 °C and +85 °C,

after Weibull

C = -55 °C and +85 °C,

before Weibull

D = +25 °C, after Weibull,

high temperature solder

E = -55 °C and +85 °C,

after Weibull, high

temperature solder

F = -55 °C and +85 °C,

before Weibull, high

temperature solder

H = high temperature

solder only (no surge)

/TR

PACKAGING OPTION

(1)

Blank = bulk

/TR = tape and reel

/HR = tape and reel, half reel

/PR = tape and reel, partial reel

/RR = tape and reel, option R

/WR = tape and reel, option W

Note

(1)

See detailed packaging information following the Standard Ratings table.

Revision: 16-Nov-17

Document Number: 40157

For technical questions, contact:

tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

www.vishay.com/doc?91000

Recommended Resources

Ignite fluorescent lamp circuit at low temperature and low pressure

Inverter circuit part 5a

Signal Level Detector Circuit

Electrical appliance password controller circuit

Three places to control one motor

MSP430 IIC communication: #includemsp430f149.h#define OP_READ 0xa1//器件地址读 #define OP_WRITE 0xa0//器件地址写 #define uchar unsigned char #define uint unsigned int #define SDA_OUT P1DIR |= BIT3 #define SDA_IN P1DIR = ~BIT3 #define SC...; 火辣西米秀 Microcontroller MCU

The role of parallel resistance on the capacitor of the integration circuit: I saw in the book (The Art of Electronics) "If the residual drift of the integrator is still too large for a given application, it may be necessary to put a large resistor R2 across C to provide dc fe...; PCB板 Analog electronics

Award-winning live broadcast: ON Semiconductor's advanced packaging and driver technologies help silicon carbide energy applications in progress: Award-winning live broadcast: ON Semiconductor's advanced packaging and driver technologies help silicon carbide energy applications in progressClick here to enter the live broadcastLive broadcast tim...; EEWORLD社区 Power technology

AD conversion interruption problem of MSP430F149: During hardware simulation, after the interrupt flag ADC12IFG is set, the interrupt subroutine is entered. However, whether reading ADC12MEM or resetting by software, such as directly ADC12IFG&=0x00;,...; bbslb Microcontroller MCU

[DLP course recommendation] no zuo no die, Xiaozuo DLP: [i=s]This post was last edited by ljj3166 on 2016-8-26 15:41[/i] Personally, I feel that DLP technology is not a very new technology. It is just that it has been monopolized by some companies for so m...; ljj3166 TI Technology Forum

I am not familiar with RF circuits, please help me!: May I ask what type of devices the devices in the pictures are? I am not very familiar with RF circuits. Except for the S00F device, you can see the chip silk screen clearly by opening the picture and...; wcht304 RF/Wirelessly

Shortcut: E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ

Popular Components