EXPOSED PAD (PIN 9) IS GND, MUST BE SOLDERED TO PCB
MS8E PACKAGE
8-LEAD PLASTIC MSOP
T
JMAX
= 150°C,
θ
JA
= 29°C/W TO 45°C/W,
θ
JC
= 5°C/W TO 10°C/W
EXPOSED PAD (PIN 9) IS GND, MUST BE SOLDERED TO PCB
ORDER INFORMATION
LEAD FREE FINISH
LT3061EDCB#PBF
LT3061IDCB#PBF
LT3061HDCB#PBF
LT3061MPDCB#PBF
LT3061EMS8E#PBF
LT3061IMS8E#PBF
LT3061HMS8E-5#PBF
LT3061MPMS8E#PBF
TAPE AND REEL
LT3061EDCB#TRPBF
LT3061IDCB#TRPBF
LT3061HDCB#TRPBF
http://www.linear.com/product/LT3061#orderinfo
PART MARKING*
LGNF
LGNF
LGNF
LGNF
LTGNG
LTGNG
LTGNG
LTGNG
PACKAGE DESCRIPTION
8-Lead (2mm
×
3mm) Plastic DFN
8-Lead (2mm
×
3mm) Plastic DFN
8-Lead (2mm
×
3mm) Plastic DFN
8-Lead (2mm
×
3mm) Plastic DFN
8-Lead Plastic MSOP
8-Lead Plastic MSOP
8-Lead Plastic MSOP
8-Lead Plastic MSOP
TEMPERATURE RANGE
–40°C to 125°C
–40°C to 125°C
–40°C to 150°C
–55°C to 150°C
–40°C to 125°C
–40°C to 125°C
–40°C to 150°C
–55°C to 150°C
LT3061MPDCB#TRPBF
LT3061EMS8E#TRPBF
LT3061IMS8E#TRPBF
LT3061HMS8E#TRPBF
LT3061MPMS8E#TRPBF
2
3061fb
For more information
www.linear.com/LT3061
LT3061 Series
ORDER INFORMATION
LEAD FREE FINISH
LT3061EDCB-3.3#PBF
LT3061IDCB-3.3#PBF
LT3061EDCB-5#PBF
LT3061IDCB-5#PBF
LT3061EMS8E-3.3#PBF
LT3061IMS8E-3.3#PBF
LT3061EMS8E-5#PBF
LT3061IMS8E-5#PBF
TAPE AND REEL
LT3061EDCB-3.3#TRPBF
LT3061IDCB-3.3#TRPBF
LT3061EDCB-5#TRPBF
LT3061IDCB-5#TRPBF
LT3061EMS8E-3.3#TRPBF
LT3061IMS8E-3.3#TRPBF
LT3061EMS8E-5#TRPBF
LT3061IMS8E-5#TRPBF
http://www.linear.com/product/LT3061#orderinfo
PART MARKING*
LGZB
LGZB
LGYZ
LGYZ
LTGZJ
LTGZJ
LTGZH
LTGZH
PACKAGE DESCRIPTION
8-Lead (2mm
×
3mm) Plastic DFN
8-Lead (2mm
×
3mm) Plastic DFN
8-Lead (2mm
×
3mm) Plastic DFN
8-Lead (2mm
×
3mm) Plastic DFN
8-Lead Plastic MSOP
8-Lead Plastic MSOP
8-Lead Plastic MSOP
8-Lead Plastic MSOP
TEMPERATURE RANGE
–40°C to 125°C
–40°C to 125°C
–40°C to 125°C
–40°C to 125°C
–40°C to 125°C
–40°C to 125°C
–40°C to 125°C
–40°C to 125°C
Consult ADI Marketing for parts specified with wider operating temperature ranges. *The temperature grade is identified by a label on the shipping container.
Consult ADI Marketing for information on nonstandard lead based finish parts.
For more information on lead free part marking, go to:
http://www.linear.com/leadfree/
For more information on tape and reel specifications, go to:
http://www.linear.com/tapeandreel/.
Some packages are available in 500 unit reels through
designated sales channels with #TRMPBF suffix.
The
l
denotes the specifications which apply over the full operating
temperature range, otherwise specifications are at T
A
= 25°C. (Note 3)
PARAMETER
Minimum Input Voltage (Note 4)
Regulated Output Voltage (Note 5)
CONDITIONS
I
LOAD
= 100mA
LT3061-3.3: V
IN
= 3.9, I
LOAD
= 1mA
LT3061-3.3: 3.9V < V
IN
< 45V, 1mA < I
LOAD
< 100mA
LT3061-5: V
IN
= 5.6, I
LOAD
= 1mA
LT3061-5: 5.6V < V
IN
< 45V, 1mA < I
LOAD
< 100mA
V
IN
= 2.1V, I
LOAD
= 1mA
2.1V < V
IN
< 45V, 1mA < I
LOAD
< 100mA (E-, I-Grades)
2.1V < V
IN
< 45V, 1mA < I
LOAD
< 100mA (MP-, H-Grades)
LT3061-3.3: ΔV
IN
= 3.9V to 45V (E-, I-Grades)
LT3061-5: ΔV
IN
= 5.6V to 45V (E-, I-Grades)
LT3061: ΔV
IN
= 2.1V to 45V (E-, I-Grades)
LT3061: ΔV
IN
= 2.1V to 45V (MP-, H-Grades)
Load Regulation (Note 4)
ΔI
LOAD
= 1mA to 100mA
LT3061-3.3: V
IN
= 3.9V (E-, I-Grades)
LT3061-5: V
IN
= 5.6V (E-, I-Grades)
LT3061: V
IN
= 2.1V (E-, I-Grades)
LT3061: V
IN
= 2.1V (MP-, H-Grades)
Dropout Voltage
V
IN
= V
OUT(NOMINAL)
(Notes 6, 7)
I
LOAD
= 1mA
I
LOAD
= 1mA
I
LOAD
= 10mA
I
LOAD
= 10mA
I
LOAD
= 50mA
I
LOAD
= 50mA
I
LOAD
= 100mA
I
LOAD
= 100mA
GND Pin Current
V
IN
= V
OUT(NOMINAL)
+ 0.6V
(Notes 6, 8)
I
LOAD
= 0
I
LOAD
= 1mA
I
LOAD
= 10mA
I
LOAD
= 50mA
I
LOAD
= 100mA
l
l
l
l
l
l
l
l
l
l
l
l
l
l
ELECTRICAL CHARACTERISTICS
MIN
3.267
3.234
4.950
4.900
594
588
585
TYP
1.6
3.3
5
600
600
600
1.6
3.1
0.5
4.4
5.0
0.2
65
130
MAX
2.1
3.333
3.366
5.050
5.100
606
612
612
22
33
4
6
25
36
4
9
110
180
180
270
240
350
290
430
90
120
500
1.8
4
UNITS
V
V
V
V
V
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
µA
µA
µA
mA
mA
3061fb
ADJ Pin Voltage (Notes 4, 5)
Line Regulation (Note 4)
I
LOAD
= 1mA
l
195
l
250
l
l
l
l
l
l
45
70
225
0.8
2
For more information
www.linear.com/LT3061
3
LT3061 Series
The
l
denotes the specifications which apply over the full operating
temperature range, otherwise specifications are at T
A
= 25°C. (Note 3)
PARAMETER
CONDITIONS
MIN
TYP
30
l
ELECTRICAL CHARACTERISTICS
Output Voltage Noise
ADJ Pin Bias Current (Notes 4, 9)
Shutdown Threshold
SHDN
Pin Current (Note 10)
Quiescent Current in Shutdown
V
OUT
= Off to On
V
OUT
= On to Off
V
SHDN
= 0V
V
SHDN
= 45V
MAX
UNITS
µV
RMS
C
OUT
= 10µF, I
LOAD
= 100mA, C
REF/BYP
= 0.01µF
V
OUT
= 600mV, BW = 10Hz to 100kHz
l
l
l
l
15
0.3
0.8
0.7
1.2
1.25
58
55
70
73
70
85
180
60
1.5
<1
3
3
nA
V
V
µA
µA
µA
dB
dB
dB
mA
mA
V
IN
= 45V, V
SHDN
= 0V
LT3061-3.3
LT3061-5
LT3061 (Note 4)
V
IN
= 7V, V
OUT
= 0
V
IN
= V
OUT(NOMINAL)
+ 1V (Note 11), ΔV
OUT
= –5%
V
IN
= -45V, V
OUT
= 0
V
OUT
Discharged to 10% of Nominal, C
OUT
= 10μF
LT3061-3.3: V
OUT
= 3.3V, V
IN
= V
SHDN
= 2.1V
LT3061-5: V
OUT
= 5V, V
IN
= V
SHDN
= 2.1V
LT3061: V
OUT
= 3.3V, V
IN
= V
SHDN
= 2.1V (Note 4)
l
l
l
Ripple Rejection
V
IN
– V
OUT
= 1.5V (AVG), V
RIPPLE
= 0.5V
P-P
,
f
RIPPLE
= 120Hz, I
LOAD
= 200mA
Current Limit
Input Reverse Leakage Current
Output Discharge Time (Note 6)
Reverse Output Current
110
1
0.75
7.3
8.4
2.5
2
15
15
15
mA
ms
µA
µA
µA
Note 1:
Stresses beyond those listed under Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to any Absolute
Maximum Rating condition for extended periods may affect device
reliability and lifetime.
Note 2:
Absolute maximum input to output differential voltage is not
achievable with all combinations of rated IN pin and OUT pin voltages.
With the IN pin at 50V, the OUT pin may not be pulled below 0V. The total
measured voltage from IN to OUT must not exceed ±50V.
Note 3:
The LT3061 is tested and specified under pulse load conditions
such that T
J
≅
T
A
. The LT3061E regulators are 100% tested at T
A
= 25°C
and performance is guaranteed from 0°C to 125°C. Performance at
–40°C to 125°C is assured by design, characterization and correlation
with statistical process controls. The LT3061I regulators are guaranteed
over the full –40°C to 125°C operating junction temperature range. The
LT3061MP regulators are 100% tested over the –55°C to 150°C operating
junction temperature. The LT3061H regulators are 100% tested at the
150°C operating junction temperature. High junction temperatures degrade
operating lifetimes. Operating lifetime is derated at junction temperature
greater than 125°C.
Note 4:
The LT3061 adjustable version is tested and specified for these
conditions with the ADJ connected to the OUT pin.
Note 5:
Maximum junction temperature limits operating conditions. The
regulated output voltage specification does not apply for all possible
combinations of input voltage and output current. Limit the output current
range if operating at the maximum input voltage. Limit the input-to-output
voltage differential if operating at maximum output current. Current limit
foldback limits the maximum output current as a function of input-to-
output voltage. See Current Limit vs V
IN
– V
OUT
in the Typical Performance
Characteristics section.
Note 6:
To satisfy minimum input voltage requirements, the LT3061
adjustable version is tested and specified for these conditions with an
external resistor divider (bottom 60k, top 230k) for an output voltage of
2.9V. The external resistor divider adds 10µA of DC load on the output.
The external current is not factored into GND pin current.
Note 7:
Dropout voltage is the minimum input-to-output voltage
differential needed to maintain regulation at a specified output current. In
dropout, the output voltage equals: (V
IN
– V
DROPOUT
).
Note 8:
GND pin current is tested with V
IN
= V
OUT(NOMINAL)
+ 0.6V and a
current source load. GND pin current will increase in dropout. See GND
pin current curves in the Typical Performance Characteristics section. For
fixed voltage options, an internal resistor divider will add 5μA to the GND
pin current. See the GND Pin Current curves in the Typical Performance
Characteristics section.
Note 9:
ADJ pin bias current flows out of the ADJ pin.
Note 10:
SHDN
pin current flows into the
SHDN
pin.
Note 11:
To satisfy requirements for minimum input voltage, current limit
is tested at V
IN
= V
OUT(NOMINAL)
+ 1V or V
IN
= 2.1V, whichever is greater.
Note 12:
This IC includes thermal limit which protects the device during
momentary overload conditions. Junction temperature exceeds 125°C
(E- and I-Grades) or 150°C (MP- and H-Grades) if thermal limit is active.
Continuous operation above the specified maximum junction temperature
I have two mobile phones that I don't use anymore. One is a Nokia 3210 and the other is an Eastcom GPRS phone. The phones are usable but the battery is broken. They are very old and have not been used...
OLED screen is a small display device, which is not inferior to LCD1602 and other liquid crystal displays, and can display a lot of content. In addition, it can be divided into I2C interface and SPI i...
[align=left][color=rgb(0, 0, 0)][backcolor=rgb(254, 254, 242)][font=Verdana, Arial, Helvetica, sans-serif][size=4] For beginners who want to learn MSP430 microcontrollers, or if you have just switched...
[align=center]Touch screen changes the world. At first glance, it sounds grand. To put it bluntly, all products in life are operated by touch screen. [font=微软雅黑]We enjoy the benefits brought by techno...
Dear experts: I customized a WinCE6.0 operating system, and the boot time is about 10 seconds. I want to add a screen before the CE system is actually started, so as not to look uncomfortable. I found...
International Solar Photovoltaic Network News: Chinese inverter company Sungrow announced that it will build a 3GW photovoltaic inverter manufacturing plant in Bangalore, the capital of Karnataka, ...[Details]
Designing for automotive LCD displays larger than 5" can be complex. The display source driver requires a supply rail called analog voltage device drain (AVDD) in the 10V to 15V range and two supply ...[Details]
ZTE,
caught
in the vortex of
the US ban on the sale
of chips
, has sounded the alarm for China's information technology industry and revealed China's "chip disease". Let's follow the ...[Details]
In order to strengthen the management of new energy vehicle charging facilities in our city, prevent and reduce accidents, protect the lives and property of the people, and improve the public safet...[Details]
1.MAX31865 (1 Introduction The MAX31865 is an easy-to-use thermistor-to-digital converter optimized for platinum resistance temperature detectors (RTDs). External resistors set the RTD sensitivity, a...[Details]
After searching a lot of information, I finally understood the time base timer. I did not use any library functions but operated the registers directly. The following introduces the systick in STM32...[Details]
When Amazon launched its first
cloud computing
service, the outside world was not optimistic about this direction, as it had high investment, low profits and many uncertainties. Let's follo...[Details]
This is my first time writing an STM32 program. I have many questions to ask. I want to convert the data of the SO of MAX6675 into the actual temperature and read it out using the serial port tool. I...[Details]
In most countries, the military is a fairly large group, and the health of soldiers is particularly important to the combat effectiveness of the army. The US Department of Defense's Advanced Resear...[Details]
Artificial Intelligence (AI) is undoubtedly the hottest topic in the technology industry in the past one or two years. In addition to the huge investments made by technology giants, financial and o...[Details]
As cryptocurrency continues to gain popularity, a technology hidden behind it has attracted more attention from the world, that is the now hotly debated
blockchain
. Let's follow the embedd...[Details]
With the large-scale development of the domestic household photovoltaic market and the improvement of component and inverter technology, the system cost has dropped significantly in the past year. The...[Details]
In order to strengthen the traceability management of recycling and utilization of power batteries for new energy vehicles, and to standardize and guide all relevant parties to fulfill their tracea...[Details]
On May 8,
Google
I/O 2018 Developer Conference was held as scheduled in Mountain View, California. In the second year of the full promotion of the "AI first" strategy, artificial intelligen...[Details]
Mobile communication resale business means that enterprises can contract part of the communication network usage rights from basic telecommunications operators, repackage them into their own brands...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
