Perimeter Access Guarding
PA4600
Perimeter Access Guarding Device
•
•
•
•
•
•
1 to 6 beams available
Operating range of 70 m
Compact size — 46 x 55 mm (1.81 x 2.17 in.)
Simple “two-box” design — no separate control box required
Individual Beam Indicators
A Rapid Delivery Product: Select models are available for shipment today or
within 3 to 5 days
C
Specifications
Performance
Protective Height:
Operating Range:
Response Time:
Electrical
Input Voltage (V
in
):
Input Power:
Safety Output Ratings:
Auxiliary (non-safety) Output
Rating:
Power Supply:
R
C
US
C
US
Variable
0.8 to 70 m
Transmit Code A: <24 ms; Transmit Code B: <20 ms; Transmit Code C: <16 ms
24 VDC ± 20%
8.4 watts (without load on the outputs)
Two PNP outputs sourcing 625 mA max @ V
in
(see note 1). Short circuit protected.
One NPN output sinking 100 mA max @ V
in
or one PNP output sourcing 100
mA @ V
in
(see notes 1 and 2)
24 VDC ± 20%. The rating depends on the current requirement of the loads
attached to the outputs (see note 3). The power supply must meet the requirements
of IEC 60204-1 and 61496-1. STI part number 42992 or equivalent.
50 mA @ 24 VDC steady state
N.O. input. Momentary contact (10 mA consumption)
± 2.5° maximum, transmitter and receiver at operating range greater than 3 m
per IEC 61496-2
Infrared light emitting diode, 880 nm
Active (yellow)
Machine run (green), machine stop (red), interlock/fault (yellow), individual
beams and two 7-segment displays (red)
Polyester powder-painted aluminum
Available in 10, 15 and 30 m lengths, unshielded.
22 AWG (0.32 mm
2
) for user-supplied cables
8-pin terminal block
Optional Receiver Connector: M-12, 8-pin connector
Optional Transmitter Connector: M-12, 5-pin connector
Description
The Perimeter Access
PA4600 is a long-range,
multi-beam safeguarding
device. It is suited to detect the
torsos of personnel entering
a hazardous area. Installation
and alignment is simplified with
Individual Beam Indicators,
which glow red when the beam
is out of alignment or blocked.
The separate Scan Codes
allow the installer to select
unique scan frequencies that
eliminate cross-talk with adja-
cent PA4600 systems. Diag-
nostics are greatly enhanced
with the LED status indicators
and numeric displays.
External Device Monitoring:
Start/Restart:
Effective Aperture Angle:
Light Source:
Transmitter Indicator Light:
Receiver Indicator Lights:
Mechanical
Construction:
Cable Length:
Minimum Cable Gauge:
Cable Connections:
IP67
0 to 55°C (32 to 131°F)
95% maximum, non-condensing
5-60 Hz maximum on all 3 axis
10 g of 0.016 seconds; 1,000 shocks for each axis on two axis
ESPE Type 4 (IEC 61496-1/ -2)
Category 4 / PL e (EN ISO 13849-1)
SIL3 / SIL3 CL3 (IEC 61508 / EN 62061)
UL508, UL1998, CAN/CSA-C22.2 No. 14, CAN/CSA-C22.2 No. 0.8,
CAN/CSA-C22.2 No 0, CAN/CSA-C22.2 No 205
Specifications subject to change without notification.
Note 1: Voltage available at the outputs is equal to V
in
- 2.0 VDC.
Note 2: Total current required by the two solid-state outputs and the aux. output should not exceed 1.35 A.
Note 3: Total system current requirement is the sum of the transmitter 100 mA and receiver 1.6 A max. (receiver
250 mA + OSSD1 load + OSSD2 load + aux. output load)
Environmental
Enclosure Rating:
Operating Temperature:
Relative Humidity:
Vibration:
Shock:
Approvals
Select models are available for Rapid Delivery.
Visit this product on www.sti.com for details.
www.sti.com/info
C-3
PA4600
Perimeter Access Guarding
Ordering
Model
Number of Beams
Perimeter Access PA4600
PA46-1-000-Q2-NO1-PN
1
PA46-2-500-Q2-NO1-PN
2
PA46-2-600-Q2-NO1-PN
2
PA46-3-400-Q2-NO1-PN
3
PA46-3-500-Q2-NO1-PN
3
PA46-4-300-Q2-NO1-PN
4
PA46-5-300-Q2-NO1-PN
5
PA46-6-300-Q2-NO1-PN
6
Overall Height
231.6 mm (9.12 in.)
731.6 mm (28.80 in.)
831.6 mm (32.74 in.)
1031.6 mm (40.61 in.)
1231.6 mm (48.49 in.)
1131.6 mm (44.55 in.)
1431.6 mm (56.36 in.)
1731.6 mm (68.17 in.)
Safety Standards and Precautions
The PA4600 is a presence sensing device used only for
perimeter access guarding applications, such as around robots
and workcells. The PA4600 meets ANSI/RIA R15.06-1999 (R2009)
and EN999:1998 optical configuration requirements for perimeter
access guarding presence-sensing devices. PA4600 systems
have been EC type examined to the requirements of IEC 61496-1,
-2 for a Type 4 ESPE. The PA4600 also meets the control reliability
requirements of ANSI/RIA R15.06-1999 (R2009).
The optical design and detection capability of the PA4600 are
optimized for torso detection of personnel entering a hazardous
area from the perimeter, also called perimeter access guarding. It
is not intended to be used for the detection of hands and fingers.
It is not designed for, nor should it be used as, a high-resolution
point-of-operation safety light curtain. The safety beams have
been positioned to meet ANSI/RIA R15.06-1999 (R2009) and
EN999:1998 perimeter guarding requirements. These documents
are an excellent reference for the application of perimeter guard-
ing optical devices such as the PA4600.
The PA4600 should only be used on machinery that can
consistently and immediately stop anywhere in its cycle or stroke.
Never use a PA4600 to guard the perimeter of a full revolution
clutched power press or machine. If the PA4600 does not protect
all access to the hazardous area, other appropriate devices such
as mechanical guards must guard the unprotected access.
The purchaser, installer and employer have the responsibility to
meet all local, state and federal government laws, rules, codes or
regulations relating to the proper use, installation, operation and
maintenance of this control and the guarded machine. See the
Installation and Operation Manual for additional information.
All application examples described are for illustration purposes
only. Actual installations will differ from those indicated.
C
Accessories (sold separately)
Part Number
Description
Transmitter Cables
CBL-LCTX-10M
Transmitter Cable, 10 m (32.8 ft)
CBL-LCTX-15M
Transmitter Cable, 15 m (49.3 ft)
CBL-LCTX-30M
Transmitter Cable, 30 m (98.5 ft)
PMC-PA46TX
M12 Transmitter Connector
Receiver Cables
CBL-LCRX-10M
Receiver Cable, 10 m (32.8 ft)
CBL-LCRX-15M
Receiver Cable, 15 m (49.3 ft)
CBL-LCRX-30M
Receiver Cable, 30 m (98.5 ft)
PMC-PA46RX
M12 Receiver Connector
Explosion Proof Enclosures
PA4600-EPKT-0300 350 mm protected height enclosure, each
PA4600-EPKT-0600 520 and 610 mm Protected Height Enclosure,
each
PA4600-EPKT-0900 870 mm Protected Height Enclosure, each
PA4600-EPKT-1200 1215 mm Protected Height Enclosure, each
Resource Modules
RM-1
RM-1 Resource Module
RM-2
RM-2 Resource Module
RM-2AC
RM-2AC Resource Module/Power Supply
RM-2AC-IP
RM-2AC-IP Resource Module/Power Supply
RM-3
RM-3 Resource Mute Module
RM-X
RM-X Safety Relay, 22.5 mm DIN enclosure
✎
For information on Resource
Modules, see page D-63
light
✎
For information on safetypage D-78
curtain accessories, see
Select models are available for Rapid Delivery.
Visit this product on www.sti.com for details.
C-6
www.sti.com/info
Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed
part of all quotes, agreements, purchase orders, acknowledgments, price lists,
catalogs, manuals, brochures and other documents, whether electronic or in
writing, relating to the sale of products or services (collectively, the "Products")
by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron
objects to any terms or conditions proposed in Buyer’s purchase order or other
documents which are inconsistent with, or in addition to, these Terms.
2. Prices; Payment Terms. All prices stated are current, subject to change with-
out notice by Omron. Omron reserves the right to increase or decrease prices
on any unshipped portions of outstanding orders. Payments for Products are
due net 30 days unless otherwise stated in the invoice.
3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices
sent to Buyer after deducting transportation charges, taxes and duties, and will
be allowed only if (i) the invoice is paid according to Omron’s payment terms
and (ii) Buyer has no past due amounts.
4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or
the maximum legal rate, whichever is less, on any balance not paid within the
stated terms.
5. Orders. Omron will accept no order less than $200 net billing.
6. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the impor-
tation or sale of the Products.
7. Taxes. All taxes, duties and other governmental charges (other than general
real property and income taxes), including any interest or penalties thereon,
imposed directly or indirectly on Omron or required to be collected directly or
indirectly by Omron for the manufacture, production, sale, delivery, importa-
tion, consumption or use of the Products sold hereunder (including customs
duties and sales, excise, use, turnover and license taxes) shall be charged to
and remitted by Buyer to Omron.
8. Financial. If the financial position of Buyer at any time becomes unsatisfactory
to Omron, Omron reserves the right to stop shipments or require satisfactory
security or payment in advance. If Buyer fails to make payment or otherwise
comply with these Terms or any related agreement, Omron may (without liabil-
ity and in addition to other remedies) cancel any unshipped portion of Prod-
ucts sold hereunder and stop any Products in transit until Buyer pays all
amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all
unpaid accounts.
9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation
unless Buyer indemnifies Omron against all related costs or expenses.
10. Force Majeure. Omron shall not be liable for any delay or failure in delivery
resulting from causes beyond its control, including earthquakes, fires, floods,
strikes or other labor disputes, shortage of labor or materials, accidents to
machinery, acts of sabotage, riots, delay in or lack of transportation or the
requirements of any government authority.
11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron:
a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship
except in “break down” situations.
b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall
constitute delivery to Buyer;
c. All sales and shipments of Products shall be FOB shipping point (unless oth-
erwise stated in writing by Omron), at which point title and risk of loss shall
pass from Omron to Buyer; provided that Omron shall retain a security inter-
est in the Products until the full purchase price is paid;
d. Delivery and shipping dates are estimates only; and
e. Omron will package Products as it deems proper for protection against nor-
mal handling and extra charges apply to special conditions.
12. Claims. Any claim by Buyer against Omron for shortage or damage to the
Products occurring before delivery to the carrier must be presented in writing
to Omron within 30 days of receipt of shipment and include the original trans-
portation bill signed by the carrier noting that the carrier received the Products
from Omron in the condition claimed.
13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the
Products will be free from defects in materials and workmanship for a period of
twelve months from the date of sale by Omron (or such other period expressed
in writing by Omron). Omron disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION,
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-
ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. Omron further disclaims all warranties and responsibility of
any type for claims or expenses based on infringement by the Products or oth-
erwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obli-
gation hereunder shall be, at Omron’s election, to (i) replace (in the form
originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying
Product, or (iii) repay or credit Buyer an amount equal to the purchase price of
the non-complying Product; provided that in no event shall Omron be responsi-
ble for warranty, repair, indemnity or any other claims or expenses regarding
the Products unless Omron’s analysis confirms that the Products were prop-
erly handled, stored, installed and maintained and not subject to contamina-
tion, abuse, misuse or inappropriate modification. Return of any Products by
Buyer must be approved in writing by Omron before shipment. Omron Compa-
nies shall not be liable for the suitability or unsuitability or the results from the
use of Products in combination with any electrical or electronic components,
circuits, system assemblies or any other materials or substances or environ-
ments. Any advice, recommendations or information given orally or in writing,
are not to be construed as an amendment or addition to the above warranty.
See http://www.omron247.com or contact your Omron representative for pub-
lished information.
Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE
FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY
WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS
BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual
price of the Product on which liability is asserted.
Indemnities. Buyer shall indemnify and hold harmless Omron Companies and
their employees from and against all liabilities, losses, claims, costs and
expenses (including attorney's fees and expenses) related to any claim, inves-
tigation, litigation or proceeding (whether or not Omron is a party) which arises
or is alleged to arise from Buyer's acts or omissions under these Terms or in
any way with respect to the Products. Without limiting the foregoing, Buyer (at
its own expense) shall indemnify and hold harmless Omron and defend or set-
tle any action brought against such Companies to the extent based on a claim
that any Product made to Buyer specifications infringed intellectual property
rights of another party.
Property; Confidentiality. Any intellectual property in the Products is the exclu-
sive property of Omron Companies and Buyer shall not attempt to duplicate it
in any way without the written permission of Omron. Notwithstanding any
charges to Buyer for engineering or tooling, all engineering and tooling shall
remain the exclusive property of Omron. All information and materials supplied
by Omron to Buyer relating to the Products are confidential and proprietary,
and Buyer shall limit distribution thereof to its trusted employees and strictly
prevent disclosure to any third party.
Export Controls. Buyer shall comply with all applicable laws, regulations and
licenses regarding (i) export of products or information; (iii) sale of products to
“forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of
regulated technology or information.
Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right
and no course of dealing between Buyer and Omron shall operate as a waiver
of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder
without Omron's written consent. (c) Law. These Terms are governed by the
law of the jurisdiction of the home office of the Omron company from which
Buyer is purchasing the Products (without regard to conflict of law princi-
ples). (d) Amendment. These Terms constitute the entire agreement between
Buyer and Omron relating to the Products, and no provision may be changed
or waived unless in writing signed by the parties. (e) Severability. If any provi-
sion hereof is rendered ineffective or invalid, such provision shall not invalidate
any other provision. (f) Setoff. Buyer shall have no right to set off any amounts
against the amount owing in respect of this invoice. (g) Definitions. As used
herein, “including” means “including without limitation”; and “Omron Compa-
nies” (or similar words) mean Omron Corporation and any direct or indirect
subsidiary or affiliate thereof.
14.
15.
16.
17.
18.
Certain Precautions on Specifications and Use
1. Suitability of Use. Omron Companies shall not be responsible for conformity
with any standards, codes or regulations which apply to the combination of the
Product in the Buyer’s application or use of the Product. At Buyer’s request,
Omron will provide applicable third party certification documents identifying
ratings and limitations of use which apply to the Product. This information by
itself is not sufficient for a complete determination of the suitability of the Prod-
uct in combination with the end product, machine, system, or other application
or use. Buyer shall be solely responsible for determining appropriateness of
the particular Product with respect to Buyer’s application, product or system.
Buyer shall take application responsibility in all cases but the following is a
non-exhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Use in consumer products or any use in significant quantities.
(iii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety equip-
ment, and installations subject to separate industry or government regulations.
(iv) Systems, machines and equipment that could present a risk to life or prop-
erty. Please know and observe all prohibitions of use applicable to this Prod-
uct.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT
ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO
2.
3.
ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROP-
ERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Programmable Products. Omron Companies shall not be responsible for the
user’s programming of a programmable Product, or any consequence thereof.
Performance Data. Data presented in Omron Company websites, catalogs
and other materials is provided as a guide for the user in determining suitabil-
ity and does not constitute a warranty. It may represent the result of Omron’s
test conditions, and the user must correlate it to actual application require-
ments. Actual performance is subject to the Omron’s Warranty and Limitations
of Liability.
Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our prac-
tice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifica-
tions of the Product may be changed without any notice. When in doubt, spe-
cial part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Omron’s representative at any time
to confirm actual specifications of purchased Product.
Errors and Omissions. Information presented by Omron Companies has been
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors or omissions.
4.
5.
Power technology
京公网安备 11010802033920号
EEWORLD
