Contents
Overview
RDM D-Subminiature Connectors
RDM 31 Series Contacts • Specifications & Interface Dimensions
RDM 31 Series Contacts
RDM Standard Series Contacts • Specifications & Interface Dimensions
RDM Standard Series Contacts
RDM-HF Series Contacts • Specifications & Interface Dimensions
RDM-HF Series Contacts
RDM 75 Ohm Contacts • Specifications & Interface Dimensions
RDM 75 Ohm Contacts
RDM High Power Contacts • Specifications & Interface Dimensions
RDM High Power Contacts
RDM High Voltage Contacts
RDM 40 Series For DIN Style Housings • Specifications & Interface Dimensions
RDM 40 Series For DIN Style Housings
D-Subminiature Housings
D-Subminiature Ordering Guide
D-Subminiature Selection Guide
D-Subminiature PCB Signal Contact Selection / Mounting Options
D-Subminiature Guide Pin Plates
D-Subminiature Shell Dimensions
D-Subminiature Edge Mount Connectors / PC Board Footprints
D-Subminiature Right Angle Mounting Dimensions
D-Subminiature Printed Circuit Board Footprint
Cable Reference Table
Mounting Hole Layouts
Cable Assembly Procedures
Tools
Other Product Offerings
33
34-35
36
37
38
39
40
41-76
77
78
79-88
89-90
91-92
4
5-8
9
10-14
15
16-19
20
21-24
25
26-27
28
29
30-32
2-3
While the information in this publication is believed to be accurate and reliable, all data presented is subject to change without notice. Winchester/Retconn disclaims
responsibility for any damages resulting from application or any incompleteness or inaccuracies in the information presented. Consult factory for specific information
on the latest design specifications.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS
OVERVIEW • RDM Product Line
SERIES
DESCRIPTION
CENTER
CONTACT
OUTER
BODY
TYPICAL VIEW
14
20
21
22
23
24
26
27
28
29
30
DS/2
75 Ohm crimp similar to the Plug: Female
Plug: Male
Socket
24 Series. Specifically
Receptacle: .040
designed for an AMP
Receptacle: Female
Dia. Male Pin
housing.
Standard Series;
solder / crimp and
solder / solder types.
Rated to 900 MHz.
Plug: Female
Plug: Male
Socket
Receptacle: .040
Receptacle: Female
Dia. Male Pin.
Similar to the 20 Series, thru Plug: Female
Plug: Male
Socket
50 Ohm. Popular with cellu-
lar manufacturers. Rated to Receptacle: .030
Receptacle: Female
Dia. Male pin
2 GHz.
High Power Contacts
solder, crimp, and P.C. pin
type.
High Voltage Contacts,
teflon bodies.
NONE
NONE
Plug: Male
Receptacle: Female
Plug: Female
Plug: Male
Socket
Receptacle: .040
Receptacle: Female
Dia. Male Pin
Plug: Female
75 Ohm crimp / crimp
Plug: Male
Socket
popular with computer work
Receptacle: .040
station manufacturers.
Receptacle: Female
Dia. Male Pin
Standard series, crimp /
Plug: Female
Plug: Male
crimp for flexible cable, sol-
Socket
der / solder for semi-rigid Receptacle: .040
Receptacle: Female
cable. Rated to 1500 MHz.
Dia. Male Pin
Plug: Female
Similar to the 20 Series,
Plug: Male
Socket
except 75 Ohm impedance.
Popular with CATV / Video Receptacle: .040
Receptacle: Female
Dia. Male Pin
applications.
Similar to the 20 Series,
except, fits into a DIN
Housing. DIN 41612.
Plug: Female
Plug: Male
Socket
Receptacle: .040
Dia. Male Pin Receptacle: Female
Thru-50 crimp / crimp (cellu- Plug: Female
Plug: Male
lar mftr.) crimp / crimp for
Socket
flexible cable solder / sol- Receptacle: .030
der, for semi-rigid cables.
Dia. Male Pin Receptacle: Female
Plug: Female
DIN Coax Contacts for DIN
Plug: Male
Socket
Housings. 50 Ohm meet DIN
Receptacle: .020
Specifications.
Dia. Male Pin Receptacle: Female
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
OVERVIEW • RDM Product Line
SERIES
DESCRIPTION
CENTER
CONTACT
Plug: Female
Socket
Receptacle: .040
Dia. Male Pin
NONE
NONE
Plug: Female
socket
Receptacle: .015
Dia. Male Pin
Plug: Female
Socket
Receptacle: .040
Dia. Male Pin
OUTER
BODY
Plug: Male
Receptacle: Female
Plug: Male
Receptacle: Female
Plug: Male
Receptacle: Female
Plug: Male
Receptacle: Female
TYPICAL VIEW
31
32
37
40
Blind Mate Contact, fits in
standard housing. Rated
to 5 GHz. Mates with PkZ.
High Power Contacts,
solder and crimp types
for DIN housings. Similar
to 22 Series.
Similar to 30 Series,
except 75 Ohms.
Similar to 31 Series fits in
DIN housing.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS
31 SERIES:
MECHANICAL:
Specifications & Interface Dimensions
ELECTRICAL:
Impedance: 50 Ohms Nominal
Frequency Range: 0 to 5.0 GHz
Insulation Resistance: 5000 Megaohms Minimum
Contact Resistance: (Milliohms maximum)
Center Contact: 5.0
Outer Contact: 3.0
Voltage Standing Wave Ratio: 0 to 5.0 GHz
Straight Connector: 1.15 +.02F GHz on RG-316 Cable
Straight Connector: 1.15 +.01F GHz on .141 Dia. Semi-Rigid
Cable
Materials:
Bodies, Plugs: Brass per ASTM B16, 1/2 HD
Bodies, Receptacles: Beryllium Copper per ASTM B196
Female Contacts: Beryllium Copper per ASTM B196
Male Contacts: Brass per ASTM B16, 1/2 HD
Insulators: Teflon per ASTM D1710
Crimp Ferrule: Annealed Copper Alloy
Clip Ring: Beryllium Copper per ASTM B194
Finish:
Body: Gold Plated per MIL-G-45204
Center Contact: Gold Plated per MIL-G-45204
Clip Ring: Nickel Plated per QQ-N-290
ENVIRONMENTAL:
Operating Temperature: -55ºC to +125ºC
Vibration: MIL-STD-202, Method 204, Test Condition D
Shock: MIL-STD-202, Method 213, Test Condition I
Corrosion Resistance: MIL-STD-202, Method 101, Condition B
MATING CHARACTERISTICS:
Receptacles, Outer Contact:
3 lbs. Maximum Insertion on a .1530 +.0001/-.0000 Dia. Pin
and a 4 oz. Minimum Withdrawl on a .1500 +.0000/-.0001 Dia. Pin
Plugs, Center Contact:
31 Series Coaxial Contacts fit all D-Subminiature Connectors and
16 oz. Maximum Insertion on a .0410 +.0001/-.0000 Dia. Pin and are interchangeable with other manufacturer’s product. Available
a .5 oz. Minimum Withdrawl on a .0390 +.0000/-.0001 Dia. Pin
in crimp or solder cable terminations.
Retention in Shell: 15 lbs. Minimum
GENERAL INFORMATION:
Plug Interface
Receptacle Interface
Winchester/Retconn
DS/4
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
RDM 31 SERIES:
Straight
Plug
Printed Circuit Board Contacts
Part Number
310-010-6040G
Mounting Hole
N0. 060A
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
Straight
Receptacle
Part Number
311-010-6040G
Mounting Hole
N0. 060A
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
Right Angle Plug
Part Number
312-010-6040G
Mounting Hole
N0. 060A
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
Right Angle Receptacle
Part Number
313-010-6040G
Mounting Hole
N0. 060A
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
Straight
Plug
Part Number
310-010-6140G
Mounting Hole
N0. 061
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS
Embedded System
京公网安备 11010802033920号
EEWORLD
