Pimoroni Pico HAT Hacker
PRODUCT ID: 3577
Description
Pimoroni's Pico HAT Hacker gives you full access to all 40 pins on your Pi, broken out at the top. It's a
super‐skinny 0.8mm PCB, so you can solder it right onto the pins on your Pi and still have enough
height on a standard header to fit a HAT or pHAT on top.
There are handy labels for all of the pins, with BCM pin numbering on one side, and more descriptive
labels on the other to show where the I2C, UART, SPI, PWM, and I2S pins are. You can solder the Pico
HAT Hacker either way up, depending on which set of labels you find more useful.
Features
o
o
o
o
BCM and descriptive pin labelling
Mounting holes (M2.5)
0.8mm thick PCB
Compatible with Raspberry Pi 3, 2, B+, A+, Zero, and Zero W
Technical Details
o
o
o
You'll need to pick up an extra 40‐pin male header to solder onto Pico HAT Hacker
Be sparing with the solder when soldering Pico HAT Hacker onto the pins of your Pi,
otherwise the solder will wick up the pins, and you'll find it cumbersome to fit
HATs/pHATs on top
Dimensions: 65x19x0.8mm (LxWxH)
For product support, replacement parts and warranty for Pimoroni products visit the Pimoroni forum or
contact Pimoroni directly.
Product Weight: 2.1g / 0.1oz
https://www.adafruit.com/product/3577 9‐15‐17
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
