Expansion Shield x600 for Raspberry Pi B+/2B/3B
SKU:DFR0450
INTRODUCTION
The X600 Expansion Shield is a highly cost-effective multimedia hat compatible with the Raspberry Pi Model B+, Raspberry Pi
2 Model B and newest Raspberry Pi 3 Model B. It uses an HDMI audio solution to give high-definition clear sound quality. It
decodes and separates voices from HDMI signal, completely solving the poor quality problem with Raspberry Pi integrated
sound card.
The hat supports digital audio 5.1 channel output and 2.0 channel analog audio output, supports Dolby digital AC-3, DTS, LPCM
and other digital audio format outputs. Use your Raspberry Pi as a multimedia player, lossless audio player or a network radio.
We recommend OS images such as Raspbian, Volumio, OSMC, PiMusicBox, etc.
SPECIFICATION
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
Input Voltage
6V to 20Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi and SATA device
Audio & Video
Allows you to extract audio signals from HDMI of your Raspberry Pi
Converts HDMI audio to digital optical or Coaxial or stereo RCA analog
The SPDIF optical or coaxial audio output supports all audio formats up to 5.1CH Dolby Digital 5.1CH / AC3 &
audio
Extracts digital 2CH PCM stereo audio signal from the HDMI input and convert it to 2CH analog stereo output through its RCA
style L/R analog output or earphone jack
Provides the Best Flexibility through Three NEW Audio EDID Settings: Pass, 2CH and 5.1CH
Maintains surround format when converting to digital optical audio
Supports high definition input up to 1080p@ (24/60) Hz, output resolution follows input
Supports HDMI signal amplification and equalization output for repeater function
HDMI output supports all audio formats including more advanced Dolby Digital Plus, PCM5.1CH and beyond
SATA
Allows you to connect SATA devices to your Raspberry Pi
Wireless
Built in IR sensor (38KHz)
Misc
Power output socket
Directly connected on top of the Raspberry Pi using the board GPIO header pins
Solderless and no wires required
Extra 40-pin header of the R-Pi in order to support existing expansion boards
Suitable for Raspberry Pi Model B+, Raspberry pi 2 Model B and Raspberry Pi 3 Model B NEW!
Dimensions
85 x 56mm (Same size as Raspberry Pi)
DTS 5.1CH
SHIPPING LIST
X600 expansion board x1
Nylon spacers (M3 x 20mm) x4
Nylon screws (M3 x 6mm) x8
USB adapter x1
HDMI adapter x1
Powered By DFRobot © 2008-2017 https://www.dfrobot.com/product-1515.html 5-2-17