Brushless Motor
• Important Notes on exporting this product or equipment containing this product;
If the end-user or application of this product is related to military affairs or weapons, its export may be controlled by “Foreign
Exchange and Foreign Trade Control Law” of Japan where export license will be required before product can be exported from
Japan.
• This product is designed and manufactured for use in General Purpose Industrial Equipment and it is not intended to be used in
equipment or system that may cause personal injury or death.
• All servicing such as installation, wiring, operation, maintenance and etc., should be performed by qualified personnel only.
• Tighten mounting screws with an adequate torque by taking into consideration strength of the screws and the characteristics of
material to which the product will be mounted. Over tightening can damage the screw and/or material; under tightening can
result in loosening.
*Example: apply 2.7 N·m – 3.3 N·m torque when tightening steel screw (M5) to steel surface.
• Install safety equipment to prevent serious accidents or loss that is expected in case of failure of this product.
• Consult us before using this product under such special conditions and environments as nuclear energy control, aerospace,
transportation, medical equipment, various safety equipments or equipments which require a lesser air contamination.
• We have been making the best effort to ensure the highest quality of our products, however, some applications with
exceptionally large external noise disturbance and static electricity, or failure in input power, wiring and components may result
in unexpected action. It is highly recommended that you make a fail-safe design and secure the safety in the operative range.
• If the motor shaft is not electrically grounded, it may cause an electrolytic corrosion to the bearing, depending on the condition
of the machine and its mounting environment, and may result in the bearing noise. Checking and verification by customer is
required.
• Failure of this product depending on its content may generate smoke of about one cigarette. Take this into consideration when
the application of the machine is clean room related.
• Please be careful when using the product in an environment with high concentrations of sulfur or sulfuric gases, as sulfuration
can lead to disconnection from the chip resistor or a poor contact connection.
• Do not input a supply voltage which significantly exceeds the rated range to the power supply of this product. Failure to heed
this caution may lead to damage of the internal parts, causing smoke and/or fire and other troubles.
• The user is responsible for matching between machine and components in terms of configuration, dimensions, life expectancy,
characteristics, when installing the machine or changing specification of the machine. The user is also responsible for
complying with applicable laws and regulations.
• Manufacturer’s warranty will be invalid if the product has been used outside its stated specifications.
• Component parts are subject to minor change to improve performance.
• Read and observe the instruction manual to ensure correct use of the product.
2015/04
Catalog
Brushless Motor
<MINAS-BL GV series / KV series / GP series>
Repair
URL
Consult to the dealer from whom you have purchased this product for details of repair work.
When the product is incorporated to the machine you have purchased, consult to the machine manufacturer or its dealer.
Electronic data of this product (Instruction Manual, CAD data) can be downloaded from the following web site;
<http://industrial.panasonic.com/ww/products/motors-compressors/fa-motors>
BRUSHLESS MOTOR
Panasonic Corporation,
Automotive & Industrial Systems Company,
Smart Factory Solutions Business Division,
Motor Business Unit
1-1 Morofuku 7-chome, Daito, Osaka 574-0044, Japan
Tel : +81-72-871-1212
Fax: +81-72-870-3151
GV
series
MINAS-BL
KV
series
GP
series
2015 / 4
The contents of this catalog apply
to the products as of April 2015.
•
This product is for industrial equipment. Don't use this product at general household.
•
Printed colors may be slightly different from the actual products.
•
Specifications and design of the products are subject to change without notice for the product improvement.
<15.04
S
>
This product is for industrial equipment. Don't use this product at general household.
Compact and high-efficiency
brushless motors
High-efficiency energy saving eco-friendly
MINAS series
*
technology adopted more compact
and higher-output brushless motors.
* MINAS series
is a registered trademark for Panasonic AC servo motors.
MINAS-BL
Contents
Introduction
1
GV series
KV series
GP series
GV series
Check the model number
Brushless motor specifications
Brushless amplifier specifications
Parameter list of brushless amplifier
Brushless motors – Details
Gear head
10
11
11
12
15
17
23
System configuration/ System configuration diagram
13
Options
KV series
Check the model number
Brushless motor specifications
Brushless amplifier specifications
Parameter list of brushless amplifier
Brushless motors – Details
26
27
27
28
33
35
Information
System configuration/ System configuration diagram
29
GP series
•90
mm square 130 W
•60
mm square 200 W
•80
mm square 50 W
46
47
47
48
51
53
57
63
Check the model number
Brushless motor specifications
Brushless amplifier specifications
Parameter list of brushless amplifie
Example setting of motion pattern
Brushless motors – Details
Gear head
MINAS-BL
Typical options
Speed Control Type
GV
50 W to 130 W
series
MINAS-BL
Typical options
Speed Control Type
KV
50 W to 750 W
series
MINAS-BL
Typical options
Position Control Type
GP
System configuration/ System configuration diagram
49
50 W to 130 W
series
Power Supply DC 24 V Type
•80
mm square 50 W only
Options
Options – Details
List of peripheral equipments
66
67
74
Console A
Digital key pad
GV series, input voltage 24 V
type made to order item.
Please contact us if you’d
like detailed information
Information
Guide to the international system of units (SI)
Console A
Digital key pad
Digital key pad
Selecting motor capacity
Conformance to international safety standards
Table of part numbers and options
Index
Sales office
1
2
76
77
79
93
95
97
101
Motor Business coexisting
Panasonic Corporation, Automotive & Industrial Systems Company,
Smart Factory Solutions Business Division,Motor Business Unit
promotes preservation of the environment together with industrial
activities and aims to “Company Coexisting with Global Environment”
Environmental conservation activities in industrial field
Environmental conservation activities have been
required widely from home level to company level
nowadays, and the role of conservation in the
industrial sector has become more important. Total
emissions of CO
2
in 2009 in Japan were approximately
1.1 billion tons, out of which 380 million tons belong to
factory and industrial field.
It has become a huge amount which significantly
exceeded transportation and business sectors.
Office
(18.9 %)
with Global Environment
Basic
attitude
Environmental
Policy
Based on “Environmental Declaration” of Panasonic, Smart Factory Solutions Business Division,
Motor Business Unit of Automotive & Industrial Systems Company also established the
"Environmental Policy" as the basic attitude to environmental conservation. Based on this, we create
more specific policies and manuals, and have been promoting environmental conservation activities.
Motor Business Unit of Smart Factory Solutions Business Division of Automotive & Industrial
Systems Company of Panasonic Corporation recognizes that the preservation of global environment
is the important mission as a good corporate citizen of society. Our philosophy is “Coexisting with
the Global Environment”, and run sound business activities harmonized with nature.
Motor holds the key to global environmental protection
From small one used in mobile phones, to big one
used in factories, motor has become indispensable in
every aspect of our society. It has been consuming
more than half part of electricity in Japan which is
equal to 573 billion kWh.
Japan
Domestic electricity consumption (2005)
Source:Motor Business Unit Research (Units: Hundred million kWh)
CO
2
Emissions (2009)
Source:CO
2
Inventory Office “Japan CO
2
emission data” (Units: million tons)
Non-energy
(6.0 %)
69.2
Power Plants
(7.0 %)
79.9
Moto
r
(
Others
(19.6 %)
1956
Factory
(29.5 %)
5
3
7.
Home
(14.1 %)
Factory
(33.9 %)
5
%)
731
162
388
If motor power
consumption
reduced by 1 %
(4.59 billion kWh)
Equivalent to
annual one thermal
power plant stop
(500K kWh×8760H)
Heater
(9.5 %)
954
Lighting
(13.6 %)
2949
(16.4 %)
(11.4 %)
Office
1642
216
Transportation
(20.1 %)
1355
Home
1140
230
With the spread of high-efficiency motors
that minimizes the loss of electrical energy,
We aim to achieve significant energy savings
for the entire industry.
KV
3
series
•
60 mm square 200 W
GV
series
•80
mm square 50 W
GP
series
•
80 mm square 50 W
4
京公网安备 11010802033920号
EEWORLD
