3M
™
Polyester Tapes 8991 and 8992
Economical
&
reliable
2
powder
coat
masking
1
3
Tight on contact,
clean removal after 400°F baking
4
With pressure sensitive silicone adhesive, 3M
™
Polyester Tapes 8991 and 8992 grab on
contact for reliable masking in most powder coat painting operations with baking at up to
400°F (204°C).
• Sharp, clean paint edge
• 8991 – 1.0 mil polyester backing and 1.4 mil silicone adhesive
• 8992 – 2.0 mil polyester backing and 1.2 mil silicone adhesive
• High dimensional and tensile strength ( 8992 – 37 lbs./in.) for tearing through cured paint
without slivering or breaking
• Resists shrinking, curling, and edge lifting but removes without adhesive residue
• Transparent blue (8991) and transparent dark green (8992) for identification and alignment
• Also used for masking in e-coating, electroplating, and anodizing
Clean removal, sharp paint edge.
5
3
3M
™
Polyester Tapes for High Temperature Applications
Product Information
Product/Color Tape Structure
Backing Total
Adhesion
(Backing/ Adhesive) Thickness Thickness to Steel
mils (mm) mils (mm) oz./in.
(N/100 mm)
ASTM Test Method:
8991/8991L
Blue
8992/8992L
Green
Polyester/Silicone
Polyester/Silicone
D-3652
D-3652
D-3330
Tensile
Elongation Temperature Comments
Strength
at Break % Range
lbs./in.
°F (°C)
(N/100 mm)
D-3759
21 (374)
37 (642)
48 (840)
D-3759
49
46
83
-60 to 400°F "Go-to" for reliable,
(-50 to 204°C) cost-effective powder
coat masking.
-60 to 400°F Die cut discs with
(-50 to 204°C) standard diameters
of 0.375, 0.5, 0.625,
0.75, 1, 2, and
4 inches. Misc. sizes
also available.
Tabbed die-cut discs
with standard
diameters of 0.393,
0.5, 0.625, 0.75, 1, 2,
and 4 inches. Misc.
sizes also available.
High performance.
1.0 (0.03) 2.4 (0.06) 31 (34)
2.0 (0.05) 3.2 (0.08) 44 (48)
2.0 (0.05) 3.3 (0.09) 33 (36)
8992D Green Polyester/Silicone
Regular Discs
8992D Green Polyester/Silicone
Tabbed Discs
2.0 (0.05) 3.3 (0.09) 33 (36)
48 (840)
83
8901/Blue
8902/Blue
8905/Blue
Polyester/Silicone
Polyester/Silicone
Polyester/Silicone
0.9 (0.02) 2.3 (0.05) 29 (31)
2.0 (0.05) 3.5 (0.08) 37 (40)
5.0 (0.12) 6.5 (0.16) 26 (28)
26 (455)
37 (718)
110 (1920)
115
110
115
-60 to 400°F
(-50 to 204°C)
NOTE:
This technical information and data should be considered representative or typical only and should not be used for specification purposes.
Warranty, Limited Remedy, and Disclaimer:
Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in
a particular application User is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application. Unless an
additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the
time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the
3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.
Limitation of Liability:
Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential,
regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
3
Industrial Adhesives and Tapes Division
3M Center, Building 225-3S-06
St. Paul, MN 55144-1000
800-362-3550 . 877-369-2923 (Fax)
www.3M.com/industrialtapes
3M is a trademark of 3M Company.
Printed in U.S.A
© 3M 2013. All rights reserved.
70-0711-0212-6
/201809304081765_pdf/pg_0001.png)
京公网安备 11010802033920号
EEWORLD/201809304081765_pdf/1.png)
/201809304081765_pdf/2.png)
/201809304081765_pdf/pg_0002.png)
