SC16C654/654D
Quad UART with 64-byte FIFO and infrared (IrDA)
encoder/decoder
Rev. 04 — 19 June 2003
Product data
1. Description
The SC16C654/654D is a 4-channel Universal Asynchronous Receiver and
Transmitter (QUART) used for serial data communications. Its principal function is to
convert parallel data into serial data and vice versa. The UART can handle serial data
rates up to 5 Mbits/s. It comes with an Intel or Motorola interface.
The SC16C654/654D is pin compatible with the ST16C654 and TL16C754 and it will
power-up to be functionally equivalent to the 16C454. Programming of control
registers enables the added features of the SC16C654/654D. Some of these added
features are the 64-byte receive and transmit FIFOs, automatic hardware or software
flow control and Infrared encoding/decoding. The selectable auto-flow control feature
significantly reduces software overload and increases system efficiency while in FIFO
mode by automatically controlling serial data flow using RTS output and CTS input
signals. The SC16C654/654D also provides DMA mode data transfers through FIFO
trigger levels and the TXRDY and RXRDY signals. On-board status registers provide
the user with error indications, operational status, and modem interface control.
System interrupts may be tailored to meet user requirements. An internal loop-back
capability allows on-board diagnostics.
The SC16C654/654D operates at 5 V, 3.3 V and 2.5 V, and the industrial temperature
range, and is available in plastic PLCC68 and LQFP64 packages.
2. Features
s
5 V, 3.3 V and 2.5 V operation
s
Industrial temperature range
s
Pin compatibility with the industry-standard ST16C454/554, ST68C454/554,
TL16C554
s
Up to 5 Mbits/s data rate at 5 V and 3.3 V and 3 Mbits/s at 2.5 V
s
64-byte transmit FIFO
s
64-byte receive FIFO with error flags
s
Automatic software/hardware flow control
s
Programmable Xon/Xoff characters
s
Software selectable Baud Rate Generator
s
Four selectable Receive and Transmit FIFO interrupt trigger levels
s
Standard modem interface or infrared IrDA encoder/decoder interface
s
Sleep mode
s
Standard asynchronous error and framing bits (Start, Stop, and Parity Overrun
Break)
s
Transmit, Receive, Line Status, and Data Set interrupts independently controlled
Philips Semiconductors
SC16C654/654D
Quad UART with 64-byte FIFO and infrared (IrDA) encoder/decoder
s
Fully programmable character formatting:
x
5-, 6-, 7-, or 8-bit characters
x
Even-, Odd-, or No-Parity formats
x
1-, 1
1
⁄
2
-, or 2-stop bit
x
Baud generation (DC to 1.5 Mbit/s)
s
False start-bit detection
s
Complete status reporting capabilities
s
3-State output TTL drive capabilities for bi-directional data bus and control bus
s
Line Break generation and detection
s
Internal diagnostic capabilities:
x
Loop-back controls for communications link fault isolation
s
Prioritized interrupt system controls
s
Modem control functions (CTS, RTS, DSR, DTR, RI, DCD).
3. Ordering information
Table 1:
Ordering information
Package
Name
SC16C654IA68
SC16C654IB64
SC16C654DIB64
PLCC68
LQFP64
LQFP64
Description
plastic leaded chip carrier; 68 leads
plastic low profile quad flat package; 64 leads; body 10
×
10
×
1.4 mm
plastic low profile quad flat package; 64 leads; body 10
×
10
×
1.4 mm
Version
SOT188-2
SOT314-2
SOT314-2
Type number
9397 750 11617
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
Product data
Rev. 04 — 19 June 2003
2 of 52
京公网安备 11010802033920号
EEWORLD
