SSTUH32866
1.8 V high output drive 25-bit 1 : 1 or 14-bit 1 : 2 configurable
registered buffer with parity for DDR2 RDIMM applications
Rev. 01 — 13 May 2005
Product data sheet
1. General description
The SSTUH32866 is a 1.8 V configurable register specifically designed for use on DDR2
memory modules requiring a parity checking function. It is defined in accordance with the
JEDEC JESD82-7 standard for the SSTU32864 registered buffer, while adding the parity
checking function in a compatible pinout. The JEDEC standard for SSTUH32866 is
pending publication. The register is configurable (using configuration pins C0 and C1) to
two topologies: 25-bit 1 : 1 or 14-bit 1 : 2, and in the latter configuration can be designated
as Register A or Register B on the DIMM.
The SSTUH32866 accepts a parity bit from the memory controller on its parity bit
(PAR_IN) input, compares it with the data received on the DIMM-independent D-inputs
and indicates whether a parity error has occurred on its open-drain QERR pin
(active LOW). The convention is even parity, that is, valid parity is defined as an even
number of ones across the DIMM-independent data inputs combined with the parity input
bit.
The SSTUH32866 is packaged in a 96-ball, 6
×
16 grid, 0.8 mm ball pitch LFBGA
package (13.5 mm
×
5.5 mm).
The SSTUH32866 is identical to SSTU32866 in function and performance, with
higher-drive outputs optimized to drive heavy load nets (for example, stacked DRAMs)
while maintaining speed and signal integrity.
2. Features
s
Configurable register supporting DDR2 Registered DIMM applications
s
Higher output drive strength version of SSTU32866 optimized for high-capacitive load
nets
s
Configurable to 25-bit 1 : 1 mode or 14-bit 1 : 2 mode
s
Controlled output impedance drivers enable optimal signal integrity and speed
s
Exceeds JESD82-7 speed performance (1.8 ns max. single-bit switching propagation
delay; 2.0 ns max. mass-switching)
s
Supports up to 450 MHz clock frequency of operation
s
Optimized pinout for high-density DDR2 module design
s
Chip-selects minimize power consumption by gating data outputs from changing state
s
Supports SSTL_18 data inputs
s
Checks parity on the DIMM-independent data inputs
s
Partial parity output and input allows cascading of two SSTUH32866s for correct parity
error processing
s
Differential clock (CK and CK) inputs
Philips Semiconductors
SSTUH32866
1.8 V high-drive DDR2 configurable registered buffer with parity
s
Supports LVCMOS switching levels on the control and RESET inputs
s
Single 1.8 V supply operation
s
Available in 96-ball, 13.5 mm
×
5.5 mm, 0.8 mm ball pitch LFBGA package
3. Applications
s
DDR2 registered DIMMs desiring parity checking functionality
s
Stacked or planar high-DRAM count registered DIMMs
4. Ordering information
Table 1:
Ordering information
T
amb
= 0
°
C to +70
°
C.
Type number
SSTUH32866EC/G
SSTUH32866EC
Solder process
Package
Name
Pb-free (SnAgCu
LFBGA96
solder ball compound)
SnPb solder ball
compound
LFBGA96
Description
Version
plastic low profile fine-pitch ball grid array package; SOT536-1
96 balls; body 13.5
×
5.5
×
1.05 mm
plastic low profile fine-pitch ball grid array package; SOT536-1
96 balls; body 13.5
×
5.5
×
1.05 mm
9397 750 14199
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 01 — 13 May 2005
2 of 28
Power technology
京公网安备 11010802033920号
EEWORLD
