PRODUCT SPECIFICATION
MINI-FIT JR.
Table of Contents
Section
1.0
2.0
Scope
Product Description
2.1 Names and Series Number(s)
Table 1 – Wire-To-Wire
Table 2 – Wire-To-Board
2.2 Dimensions, Materials, Platings, and Markings
2.3 Safety Agency Approvals
Applicable Documents and Specifications
Ratings
4.1 Voltage
4.2 Applicable Wires
4.3 Maximum Current Rating (Amperes)
Table 3 – Maximum Current Rating (Amperes)
Wire-To-Wire and Wire-To-Board
4.4 Temperature
4.5 Wave Solder Process Temperature
4.6 Glow Wire
Wire-To-Wire Performance
5.1 Electrical Requirements
5.2 Mechanical Requirements
5.3 Environmental Requirements
Wire-To-Board Performance
6.1 Electrical Requirements
6.2 Mechanical Requirements
6.3 Environmental Requirements
Test Sequences
Packaging
Page
2
2
2
2
2
3
3
3
4
4
4
4
4
5
5
5
5
5
6
8
9
9
9
11
12
12
12
12
12
3.0
4.0
5.0
6.0
7.0
8.0
9.0 Other Information
9.1 Gages and Fixtures
9.2 Cable tie and/or twist location
REVISION:
ECR/ECN INFORMATION:
EC No:
UCP2016-4279
DATE:
2016/05/09
TITLE:
E8
PRODUCT SPECIFICATION FOR
MINI-FIT JR.
CONNECTOR SYSTEM
CHECKED BY:
SHEET No.
1
of
12
FSMITH
DOCUMENT NUMBER:
CREATED / REVISED BY:
APPROVED BY:
PS-5556-001
AZAHIROVIC
JBELL
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC
PRODUCT SPECIFICATION
1.0 SCOPE
This Product Specification covers performance requirements for the MINI-FIT JR. 4.20 mm (.165 inch)
centerline (pitch) printed circuit board (PCB) connector series with Tin or 30µ” Gold plating, and
the MINI-FIT JR. connector series terminated with 16 to 28 AWG stranded, copper wire using Crimp
technology with Tin or 30µ” Gold plating.
2.0 PRODUCT DESCRIPTION
2.1 PRODUCT NAME AND SERIES NUMBER (S)
Table 1 – WIRE-TO-WIRE
Series Number
UL(600V)
5556
n/a
5557
Yes
5558
n/a
5559
Yes
45776
Yes
46992/46994
Yes
46993/172646
Yes
Description
Female Crimp Terminal
Receptacle Housing
Male Crimp Terminal
Plug Housing
Plug Housing
Receptacle Housing
Plug housing
CSA(600V)
n/a
Yes
n/a
Yes
Yes
Yes
Yes
IEC(250V)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Description
Female Crimp Terminal
Receptacle Housing
Vertical Header
Right Angle Header
Receptacle Housing
Vertical Header
Right Angle Header
Table 2 – WIRE-TO-BOARD
Series Number
UL(600V)
CSA(600V)
5556
n/a
n/a
5557
Yes
Yes
5566
Yes
Yes
5569
Yes
Yes
46992/46994
Yes
Yes
172447/172647
Yes
Yes
172448/172648
Yes
Yes
IEC(250V)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Other products conforming to this specification are noted on the individual drawings.
REVISION:
ECR/ECN INFORMATION:
EC No:
UCP2016-4279
DATE:
2016/05/09
TITLE:
E8
PRODUCT SPECIFICATION FOR
MINI-FIT JR.
CONNECTOR SYSTEM
CHECKED BY:
SHEET No.
2
of
12
FSMITH
DOCUMENT NUMBER:
CREATED / REVISED BY:
APPROVED BY:
PS-5556-001
AZAHIROVIC
JBELL
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC
PRODUCT SPECIFICATION
2.2 DIMENSIONS, MATERIALS, PLATINGS AND MARKINGS
See the appropriate sales drawings for the information on dimensions, materials, platings and
markings.
2.3 SAFETY AGENCY APPROVALS
UL File: E29179
CSA Certificate: LR 19980
IEC 61984 Certification : Tested to and found in compliance with IEC 61984. NRTL type
examination certificate available upon request. Contact Molex Safety team for questions regarding
certification on specific part numbers.
3.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS
See sales drawings and the other sections of this specification for the necessary referenced
documents and specifications.
Application Specification: AS-45499-001 (moisturizing nylon parts)
Test Summary: TS-5556-002
REVISION:
ECR/ECN INFORMATION:
EC No:
UCP2016-4279
DATE:
2016/05/09
TITLE:
E8
PRODUCT SPECIFICATION FOR
MINI-FIT JR.
CONNECTOR SYSTEM
CHECKED BY:
SHEET No.
3
of
12
FSMITH
DOCUMENT NUMBER:
CREATED / REVISED BY:
APPROVED BY:
PS-5556-001
AZAHIROVIC
JBELL
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC
PRODUCT SPECIFICATION
4.0 RATINGS
4.1 VOLTAGE
600 Volts AC (RMS) (or 600 Volts DC)
*Voltage rating based on UL 1977. Maximum voltage allowed may vary dependent upon “End
Use Application”. Refer to the applicable end use standard for additional information on Voltage,
Creepage and Clearance requirements.
4.2 APPLICABLE WIRES
Maximum Insulation Diameter
and
Applicable Wire Gauges
16 AWG Standard, Copper: 3.15 mm / .124 inches MAXIMUM
18-24 AWG Standard, Copper: 3.10 mm / .122 inches MAXIMUM
22-28 AWG Standard, Copper: 1.80 mm / .071 inches MAXIMUM
4.3 MAXIMUM CURRENT RATING (Amperes)**
Table 3 - MAXIMUM CURRENT RATING (Amperes)
Wire-to-Wire and Wire-to-Board
Brass
Ckt. Size
Wire
Phosphor Bronze
7 - 10
7
7
5
4
3
2
1
12 - 24
6
6
5
4
3
2
1
Ckt. Size
Wire
2&3
9
9
7
5
4
3
2
4-6
8
8
6
4
3
2
1
2&3
8
8
6
4
3
2
1
4-6
7
7
5
3
2
1
1
7 - 10
6
6
4
3
2
1
1
12 - 24
5
5
4
3
2
1
1
AWG #16
AWG #18
AWG #20
AWG #22
AWG #24
AWG #26
AWG #28
AWG #16
AWG #18
AWG #20
AWG #22
AWG #24
AWG #26
AWG #28
Note: PCB trace design may greatly affect temperature rise results in Wire-to-Board Applications.
** Current rating is application dependent and may be affected by the wire rating such as listed in UL-
60950-1. Each application should be evaluated by the end user for compliance to specific safety agency
requirements. The ratings listed in the chart above represents the MAXIMUM current carrying capacity of a
fully loaded connector with all circuits powered using tinned copper conductor stranded wire per Molex test
method based on a 30º C maximum temperature rise over ambient temperature and are provided as a
guideline. Appropriate de-rating is required based on circuit size, ambient temperature, copper trace size
on the PCB, gross heating from adjacent modules/components and other factors that influence connector
performance. Wire size & stranding, tin coated or bare copper wire, wire length & crimp quality are other
factors that influence current rating.
REVISION:
ECR/ECN INFORMATION:
EC No:
UCP2016-4279
DATE:
2016/05/09
TITLE:
E8
PRODUCT SPECIFICATION FOR
MINI-FIT JR.
CONNECTOR SYSTEM
CHECKED BY:
SHEET No.
4
of
12
FSMITH
DOCUMENT NUMBER:
CREATED / REVISED BY:
APPROVED BY:
PS-5556-001
AZAHIROVIC
JBELL
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC
PRODUCT SPECIFICATION
4.4 TEMPERATURE
Operating: *
Nonoperating:
Brass
- 40°C to + 80°C
- 40°C to + 80°C
Phos Bronze Terminals
- 40°C to + 105°C
- 40°C to + 105°C
*Including 30
°
C terminal temperature at rated current
4.5 WAVE SOLDER PROCESS TEMPERATURE
Headers with pegs: 240°C Maximum
Headers without pegs: 260°C Maximum and with Matte Tin over Nickel plating
Headers with Bright Tin over Nickel plating: 240°C Maximum
Headers with Tin over Copper plating: 240°C Maximum
Headers in Glow Wire series 172447, 172647, 172448, 172648 with pegs: 220°C Maximum
For Headers: Matte tin over Nickel plating is recommended for new applications.
4.6 Glow Wire
The following series are glow capable: 46992, 46993, 46994, 172646, 172447, 172448, 172648,
45776. Representative samples were tested and found compliant with EN 60695-2-11-2001 / IEC
60695-2-11-2000 Glow Wire Test Methods for End-Products. These were additionally
investigated for compliance with EN 60335-1 / IEC 60335-1 750C / 2 sec with no flaming. VDE
Test report available upon request.
5.0 WIRE-TO-WIRE PERFORMANCE
5.1 ELECTRICAL REQUIREMENTS
ITEM
DESCRIPTION
Contact
Resistance
(Low Level)
Insulation
Resistance
Dielectric
Withstanding
Voltage
TEST CONDITION
Mate connectors: apply a maximum
voltage of 20 mV and a current of 100
mA. Wire resistance shall be removed
from the measured value.
Mate connectors: apply a voltage of 500
VDC between adjacent terminals and
between terminals to ground.
Mate connectors: apply a voltage of
2200 VAC for 1 minute between
adjacent terminals and between
terminals to ground.
Mate connectors. Measure the
temperature rise at the rated current
after 96 hours, during current cycling (45
minutes ON and 15 minutes OFF per
hour) for 240 hours, and after final 96-
hour steady state.
REQUIREMENT
10 milliohms
MAXIMUM
[initial]
1000 Megohms
MINIMUM
No breakdown.
Current leakage < 5 mA
1
2
3
4
Temperature Rise
(via Current
Cycling)
Temperature rise:
+30°C MAXIMUM
REVISION:
ECR/ECN INFORMATION:
EC No:
UCP2016-4279
DATE:
2016/05/09
TITLE:
E8
PRODUCT SPECIFICATION FOR
MINI-FIT JR.
CONNECTOR SYSTEM
CHECKED BY:
SHEET No.
5
of
12
FSMITH
DOCUMENT NUMBER:
CREATED / REVISED BY:
APPROVED BY:
PS-5556-001
AZAHIROVIC
JBELL
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC
京公网安备 11010802033920号
EEWORLD
