Metal-Out Static Shielding Bag 2100R/2110R
The transparent, puncture resistant metal-out static shielding bag is designed
to provide static safe packaging for the shipment and/or storage of ESD
sensitive items including outside ESD protected areas. The metal layer is
positioned near the outer surface to help reduce voltage retention and enhance
static decay. Bags are printed with an ESD protective symbol and a lot code for
traceability. Open Top (2100R) and ZipTop (2110R) styles are available. The
bags are heat sealable.
SCS Static Shielding Bags are manufactured from a top coat, metal, polyester,
polyethylene laminate. The proprietary top coating is designed to protect
the metal layer. Polyester dielectric, in concert with the metal layer, provides
shielding of Electrostatic Discharge (ESD) to minimize the penetration of
electric fields and discharges.
Meets ANSI/ESD S20.20, Packaging standard ANSI/ESD S541, and
Static Control Bag ANSI/ESD S11.4 Level 3
Physical
Typical Value
8000 PSI, 55 MPa
24 lbs, 106 N
18 lbs, 80 N
3.2 mils, 0.081 mm +/-10%
Pass
Testing Method
Tensile Strength
Puncture Resistance
Seal Strength
Thickness
Marking Adhesion
Transparency
Electrical
ESD Shielding
ASTM D882
MIL-STD-3010C Method 2065
ASTM D882
MIL-STD-3010C Method 1003
IPC-TM-650 2.4.1
Tobias
Testing Method
ANSI/ESD STM11.31
37%
Typical Value
<10 nJ
1x10
4
to <1x10
11
ohms
1x10
4
to <1x10
6
ohms
<100 volts
Typical Value
Not Detected
375°F, 190°C
0.5 – 3.5 seconds
30 – 70 PSI, 206 – 482 KPa
Open Top Bag
Open Top Bag
ZipTop Bag
ZipTop Bag
Surface Resistance -
Interior
Surface Resistance -
Exterior
Charge Retention
Cleanliness
Silicone
Temperature
ANSI/ESD STM11.11
ANSI/ESD STM11.11
SCS Test Method 1410.515
Testing Method
FTIR
Heat Sealing Conditions Typical Value
Time
Pressure
Bag is free of amines, silicones and heavy metals.
This product is intended for commercial use only. This product is not on the Qualified Product
Listing under the Defense Standardization Program.
Tolerance: Width -0, +1/4"
Note: Standard bag markings shown above
Tolerance (inches): Width -0, +0.250 Length +/- 0.125 Offset O to 0.250
and
Length +/- 1/8" Offset
+/-
1/4"
0 to
0.125
are not to scale.
Seal width
Seal width 3/8" with a tolerance of +/- 1/8"
RohS 2, REAch, and conflict Minerals Statement
None of the RoHS 2 restricted materials or REACH substances of very high concern as
of 2014/12/17, or Conflict Minerals are intentionally added in manufacturing this product.
Ref: European Union Directive 2011/65/EU and Regulation (EC) No. 1907/2006/CE.
See
SCS Warranty, Limitation of Liability and Remedies
Made in the United States of America with Globally Sourced Materials.
Specifications and procedures subject to change without notice.
2100R/2110R SERIES METAl-OUT STATIc ShIElDING BAG
926 JR Industrial Drive, Sanford, NC 27332
WEB SITE: StaticControl.com
PHONE (919) 718-0000
© 2015 DESCO INDUSTRIES INC.
Employee Owned
DRAWING
NUMBER
2100R/2110R
DATE
July
2015
京公网安备 11010802033920号
EEWORLD
