PI7C9X2G303EL (PCIe Switch)
PI7C9X2G303EL
3-Port, 3-Lane, ExtremeLo™ PCIe2.0 Packet Switch
Product Description
The PI7C9X2G303EL is a PCI Express
®
2.1 3-port/3-lane PCI Express ExtremeLo™ Packet Switch specifically designed to meet the latest
low-power, lead (Pb)-free and green system requirements. The PI7C9X2G303EL is a high-performance, cost-effective solution that can be
implemented in systems such as Embedded system, Wi-Fi router/ gateway,, Printer, Storage, combo card, HBA, set-top box, motherboard,
laptop, docking station, and other power-sensitive high performance platforms. The name of the family, ExtremeLo™, refers to Pericom’s
proprietary power-saving PowerSave™ technology.
The PI7C9X2G303EL provides one x1 upstream port and two x1 downstream ports. The PI7C9X2G303EL provides users the flexibility to
expand or fan-out from a wide range of I/O Bridges such as PCH, ICH, IOH, embedded MCU, FPGA, and other Application Specific ICs.
Industry Specifications Compliance
•
PCI Express
®
Base Specification, Revision 2.1
•
PCI Express CEM Specification, Revision 2.0
•
PCI-to-PCI Bridge Architecture Spec., Rev 1.2
•
Advanced Configuration Power Interface (ACPI) Specification
Features
•
PCISIG PCI Express 2.1 certificated
•
Integrated 100MHz Clock buffer for each downstream port
•
Reliability, Availability and Serviceability
◦
Supports Data Poisoning and End-to-End CRC
◦
Advanced Error Reporting and Logging
◦
IEEE 1149.6 JTAG interface support
• Link Power Management
◦
Supports L0, L0s, L1, L2, L2/L3
Ready
and L3 link power state
◦
Active state power management for L0s and L1 state
• Device State Power Management
◦
Supports D0, D3
Hot
and D3
Cold
◦
3.3V Aux Power support in D3
Cold
power state
• Supports up to 512-byte maximum payload size
• Power Dissipation: 0.65 W typical in L0 normal mode and 0.2W typical in L1 mode
• Industrial Temperature Range: -40° to 85°C
• MTBF: 50,927,360 hours
• Package: 136-pin aQFN 8mm x 8mm
◦
Pb free and 100% Green
Enhanced Features
• Programmable Driver Current and De-Emphasis Level at each individual port
• 150ns typical latency for packet running through switch without blocking
• Supports “Cut-through”(Default) as well as “Store and Forward” mode for switching packets
• Advanced Power Savings
https://www.pericom.com/products/pcie-switch/part/PI7C9X2G303EL
1/17/2017
PI7C9X2G303EL (PCIe Switch)
◦
Empty downstream ports are set to idle
◦
Clock to corresponding circuit is turned off when any port enters L1 or ASPM L1
◦
Supports Access Control Service (ACS) for peer-to- peer traffic
◦
Supports Address Translation (AT) packet for SR-IOV application
◦
Supports Latency Tolerance Reporting (LTR) to improve Platform Power Management
◦
Supports Optimized Buffer Flush Fill (OBFF) to improve Platform Power Management
Applications
• Wireless AP/ Router
• Wire/ Wireless Tele/ data communication Embedded system
• Set-top box and consumer devices Industrial control
• NAS/ Storage
• Printer/ MFP
• Peripheral
• PCIe Surveillance and Combo cards Notebook internal PCIe fan-out
• PC Motherboard PCIe slot expansion
https://www.pericom.com/products/pcie-switch/part/PI7C9X2G303EL
1/17/2017