MAXWSNENV
Wireless Sensor Node
Environmental Sensor
Demo Kit
Benefits and Features
General Description
The MAXWSNENV demo kit provides a convenient
platform evaluating the capabilities of the environmental
sensor version of Maxim’s wireless sensor node (WSN).
The kit provides an excellent foundation for the Internet of
Things (IoT) applications.
The WSN board includes a microcontroller, BLE trans-
ceiver, multiple environmental sensors and coin-cell
holder. The WSN kit also includes a programming adapter
compatible with the ARM mbed HDK specification.
● Microcontroller Plus BLE Transceiver Provides a
Convenient Development Platform
● On-Board Sensors for Temperature, Ambient
Light, Humidity, and Barometric Pressure Measure
Environmental Data
● Low-Power Operation Extends Battery Life
● ARM mbed-Compatible HDK Interface Provides
Quick Connection to Toolchain
● General-Purpose Pushbutton Switch and Tri-Color
LED Allow for Real-Time Input and Feedback
● On-Board Battery Holder Provides Convenient and
Replaceable Power Source
Kit Contents
● MAXWSNENV environmental sensor board with
a preprogrammed demo
● MAXHDK, ARM mbed HDK-compatible hardware
development board
● USB standard A-to-micro-B cable (for connecting
MAXHDK to a PC)
● Coin-cell battery
Block Diagram
COIN-CELL
GPIO
SPI
GPIO
BLE
TRANSCEIVER
ANTENNA
TRI-COLOR
LED
PUSHBUTTON
SWITCH
TEMP
SENSOR
MMBT3904
ANALOG
MAX32600
PRESSURE
SENSOR
BMP180
I
2
C
LIGHT
SENSOR
RPM-075PT
ANALOG
HUMIDITY
SENSOR
Si7020
19-7633; Rev 0; 5/15
MAXWSNENV
Wireless Sensor Node
Environmental Sensor
Demo Kit
LEDs
A single, tri-color LED with series resistors is connected to
GPIO pins P1.4, P1.6, and P1.7.
Detailed Description
This demo kit is general purpose in nature, however, the
included sensors allow for the development of sophisti-
cated wireless sensor network and IoT nodes. This sec-
tion describes each major function or component on the
MAXWSNENV board.
Use the MAXWSNENV board with the following separate
documents:
● MAXWSNENV data sheet (this document)
● MAX32600 data sheet
● MAX32600 user guide
● MAXWSNENV board schematic
● MAXWSNENV board bill-of-materials
Component List and Schematic
● MAXWNENV_BOM.xls
● MAXWNENV_Schematic.pdf
Refer to the following files attached to this data sheet for
component information and schematic:
Ordering Information
PART
MAXWSNENV#
#Denotes RoHS compliant.
TYPE
Demo kit
Board Power
The demo board is powered by on-board coin-cell battery
or by a connected MAXHDK.
Bluetooth Low-Energy (BLE) Controller
The Bluetooth® low-energy controller is Bluetooth V4.0
compliant.
Sensors
The MAXWSNENV is fitted with four environmental sen-
sors. Digital sensors are connected to the MAX32600 I2C
master interface. Analog sensors are connected to the
MAX32600 ADC interface. The MAXWSNENV includes
the following sensors:
● BMP180 pressure sensor
● SI7020-A10 humidity sensor
● RPM-075PTT86 phototransistor
● NPN diode temperature sensor
Pushbuttons
Pushbutton SW1 can be used to generate an input for test
purposes on port pin P1.5. SW1 is normally open, and
therefore, provides a logic 0 when depressed. Firmware
defines the action taken on this switch closure.
Pushbutton SW2 provides a power-on-reset function to
the MAX32600 microcontroller.
USB
The MAXWSNENV board provides access to the
MAX32600 USB D+ and D- signals on connector J1 pins
16 and 18, respectively.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
www.maximintegrated.com
Maxim Integrated │ 2
MAXWSNENV
Wireless Sensor Node
Environmental Sensor
Demo Kit
PAGES
CHANGED
—
Revision History
REVISION
NUMBER
0
REVISION
DATE
5/15
Initial release
DESCRIPTION
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated’s website at www.maximintegrated.com.
Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses
are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc.
© 2015 Maxim Integrated Products, Inc. │ 3
京公网安备 11010802033920号
EEWORLD
