Silicone Grease
8462 Technical Data Sheet
ISO 9001:2008 Registered Quality System. Burlington, Ontario, CANADA
SAI Global File: 004008
8462
Description
The 8462
Silicone Grease
is a translucent, water repelling (hydrophobic), non-melting, and lubricating
dielectric grease that provides superior corrosion and arcing resistance for connectors. It is widely
applicable because it is safe for most metals, rubbers, plastics, and elastomers. As well, it is usable in
many environments due to its high resistance and stability with respect to extreme cold, heat, humidity,
and other extreme exposure conditions like high voltages. Voltage arcing can be prevented due to its
excellent dielectric properties. Further, because it repels water, it provides excellent oxidation resistance
for contacts and relays.
Benefits and Features
•
•
•
•
•
•
Stable over wide temperature range and conditions—Non-melting
Excellent electrical insulator—High
dielectric strength
Usable for incidental food contact
(Conforms to 21 CFR section
178.3570)
Odorless and non-toxic
Corrosion inhibitor
Suitable for Use in Food Facilities as a Non-Food Chemical—Canadian
and NFS recognition
letters available on request
ENVIRONMENT
RoHS Compliant
Zero-VOC
Usage Parameters
Properties
Shelf Life
a)
Value
5y
Temperature Ranges
Properties
Constant Service
Temperature
Storage Temperature
Limits
b)
Value
-50 to 250 °C
[-58 to 482 °F]
0 to 25 °C
[32 to 77 °F]
a) Reported shelf life assumes room
temperature storage and unopened container.
b) Cold storage avoids material separation and
settling. If storing at 25 °C, mix thoroughly to
disperse filler before use.
Principal Components
Name
Dimethylpolysioxane
Amorphous silica
CAS Number
63148-62-9
7631-86-9
Page
1
of
4
Date: 30 August 2017 / Ver. 1.09
Silicone Grease
8462 Technical Data Sheet
ISO 9001:2008 Registered Quality System. Burlington, Ontario, CANADA
SAI Global File: 004008
8462
Properties
Electrical Properties
Volume Resistivity (
v
)
Volume Conductivity (
v
)
Dielectric Strength @0.01"
Arc Resistance
Thermal Properties
Thermal Conductivity
Grease Properties
Evaporation Loss, 22 h @165 °C [329 °F]
Oil Separation, 30 h @165 °C [329 °F]
Dropping Point
Water Washout @38 °C [100 °F]
a)
Worked Penetration
Emcor Rust Test, distilled water
Method
ASTM D 257
"
ASTM D 149
Value
1 × 10
13
cm
1 × 10
-13
S/cm
500 V/mil [19.7 kV/mm]
120 s
Value
0.16 W/(mK)
Value
1.4%
0.4%
>304 °C [>579 °F]
3.2%
320
#4
b)
Method
Method
ASTM D 2595
ASTM D 6184
ASTM D 2265
ASTM D 1264
IP 220
a) Bearing dried at 77 °C [171 °F]
b) Corroded areas covering >5% and <10% of the running track surface
Physical Properties
Color
Odor
Density @25 °C [77 °F]
Viscosity
Lubricant
Bleed Resistant
Corrosion Resistant
Base Material
Filler
Method
Visual
ASTM D 1475
Brookfield
Value
Translucent
None
1.007 g/mL
Thixotropic paste
Yes
No
Yes
Silicone Oil
Silica
Compatibility
Chemical—It
is compatible with a wide variety of metal, rubber, and plastic substances such as ignition
switches, valve seats, O-rings, sealing rings, transformer connectors, and cables systems.
Storage
Store between 0 and 10 °C [32 and 50 °F] in dry area to minimize settling. You many also store this
product at higher temperatures but this can cause settling. If settling occurs, mix thoroughly until the
product is homogeneous again.
Page
2
of
4
Date: 30 August 2017 / Ver. 1.09
Silicone Grease
8462 Technical Data Sheet
ISO 9001:2008 Registered Quality System. Burlington, Ontario, CANADA
SAI Global File: 004008
8462
Health, Safety, and Environmental Awareness
Please see the 8462
Safety Data Sheet
(SDS) for greater detail on transportation, storage, handling and
other security guidelines.
Environmental Impact:
The volatile organic content is 0.0% by WHMIS and European standards.
Health and Safety:
The 8462 may cause a mild skin or eye irritation.
HMIS® RATING
HEALTH:
FLAMMABILITY:
PHYSICAL HAZARD:
PERSONAL PROTECTION:
Approximate HMIS and NFPA Risk Ratings Legend:
0 (Low or none); 1 (Slight); 2 (Moderate); 3 (Serious); 4 (Severe)
NFPA® 704 CODES
1
0
0
0
1
1
0
Application Instructions
The performance of the 8462 Silicone Grease depends on surface preparation. Improperly prepared
contact surfaces can degrade the oxidation protection, dielectric properties, and lubrication characteristics
by trapping contaminants between the surface and the grease. The thickness and coverage should be
adjusted to meet your needs.
Prerequisites
•
•
Clean and dry the surface of the substrate to remove other oils and greases, as well as dust, water,
solvents, or any other contaminants.
(Optional) Wear gloves to avoid contaminating the surface and to avoid possible skin irritation.
Equipment
•
•
•
Lint free cloth (for cleaning contact and for wiping excess residue)
Spatula or stick application tools (sized appropriately for your application)
Isopropyl alcohol or other residue-free organic solvents (for cleaning)
N
OTE
:
Thoroughly clean oil-based cleaners (like WD-40) that are designed to leave a film on the metal
surface.
To apply the paste
1. Wipe the contact with a lint-free cloth.
2. Clean the contacts with isopropyl alcohol or other non-oil based cleaner.
3. Once dry, apply the paste with the application tool to the contact, ensuring adequate coverage and
desired thickness.
Page
3
of
4
Date: 30 August 2017 / Ver. 1.09
Silicone Grease
8462 Technical Data Sheet
ISO 9001:2008 Registered Quality System. Burlington, Ontario, CANADA
SAI Global File: 004008
8462
Packaging and Supporting Products
Cat. No.
8462-85ML
8462-1P
8462-1G
Packaging
Tube
Jar
Pail
Net Volume
85 mL
2.87 fl oz
473 mL
16.0 fl oz
3.78 L
0.999 gal
Net Weight
85.6 g
3.02 oz
476 g
1.05 lb
3.80 kg
8.39 lb
Packaging
0.12 kg
0.54 kg
TBD
Weight
0.26 lb
1.2 lb
TBD
Contact MG Chemicals if custom packaging or sizes are required
TBD = To be determined
Supporting Products
•
•
Thinner 1:
Cat. No. 4351-1L
Isopropyl Alcohol:
Cat. No. 824-1L
Technical Support
Contact us regarding any questions, improvement suggestions, or problems with this product. Application
notes, instructions, and FAQs are located at
www.mgchemicals.com.
Email:
support@mgchemicals.com
Phone: +(1) 800-340-0772 (Canada, Mexico & USA)
+(1) 905-331-1396 (International)
+(44) 1663 362888 (UK & Europe)
Fax: +(1) 905-331-2862 or +(1) 800-340-0773
Mailing address:
Manufacturing & Support
1210 Corporate Drive
Burlington, Ontario, Canada
L7L 5R6
Head Office
9347–193rd Street
Surrey, British Columbia, Canada
V4N 4E7
Warranty
M.G. Chemicals Ltd.
warranties this product for 12 months from the date of purchase by the end user.
M.G. Chemicals Ltd.
makes no claims as to shelf life of this product for the warranty. The liability of
M.G. Chemicals Ltd.
whether based on its warranty, contracts, or otherwise shall in no case include
incidental or consequential damage.
Disclaimer
This information is believed to be accurate. It is intended for professional end users having the skills to
evaluate and use the data properly.
M.G. Chemicals Ltd.
does not guarantee the accuracy of the data and
assumes no liability in connection with damages incurred while using it.
Page
4
of
4
Date: 30 August 2017 / Ver. 1.09
京公网安备 11010802033920号
EEWORLD
