, an ultra-high lumen density COB product line, is designed for high intensity spotlights used in commercial
and retail settings. H series arrays offer industry leading color over angle uniformity, and replace ceramic metal halide
lamps by providing equal or greater center beam candle power at lower power and at greater lifetimes. Their tight beam
control and exceptional quality of light is well suited for demanding directional spot applications.
H Series LEDs are available in a variety of CCT and CRI combinations, including Décor Series Class A, a revolutionary
advancement in lighting designed to match how humans perceive and prefer light, and Décor Series Ultra. Décor Series
Ultra offers a high CRI of 97 and emphasizes reds and color tones to which the human eye is most receptive. Typical
applications for H Series LEDs include but are not limited to commercial and residential down lights, accent, spot & track
lights.
Features
Benefits
• Market-leading flux density
• Center beam candle power comparable to ceramic
metal halides
• Uniform, high-quality illumination
• Small point LED source
• Minimum 80, 90, 95 CRI and Class A options
• ENERGY STAR
®
/ANSI compliant color binning
structure with 2SDCM and 3SDCM options
• Enhanced optical control
• Clean, consistent white light without pixelation
• High quality, true color reproduction
• Significantly reduced thermal resistance and
increased operating conditions
• Lower operating costs
• Reduced maintenance costs
• Environmentally friendly, no disposal issues
H Series
H Series
Contents
Product Feature Map
Product Nomenclature
Product Selection Guide
Performance at Commonly Used Drive Currents
Electrical Characteristics
Absolute Maximum Ratings
Performance Curves
Typical Radiation Pattern
Typical Color Spectrum
Mechanical Dimensions
Color Binning Information
Packaging and Labeling
Design Resources
Precautions
Disclaimers
About Bridgelux
2
2
3
4
6
7
8
11
12
13
14
15
16
16
16
17
1
Product Feature Map
H Series arrays are engineered to provide superior thermal
and optical performance. The arrays, the most com-
pact chip-on-board devices across all Bridgelux LEDs,
incorporate several features to simplify design and as-
sembly, and to ensure superior reliability.
Fully engineered substrate
for consistent thermal, mechanical
and optical properties
Case Temperature (T
c
) Measurement
Point
Yellow phosphor Light
Emitting Surface (LES)
White ring around LES
Designed to comply with global
safety standards for creepage
and clearance distances
Solder Pad
Polarity symbol
Note: Part number and lot codes are scribed on back of array
Product Nomenclature
Part number designation for Bridgelux H Series arrays is explained as follows:
1 2 3 4
56
7
8 9 10 11
– 12
– 13 14
BXRH – 30 E
Product Family
Nominal CCT
27 = 2,700K
30 = 3,000K
35 = 3,500K
40 = 4,000K
Minimum CRI
E = 80 CRI
G = 90 CRI
H = Décor Series Ultra (97 CRI typical)
A = Décor Series Class A (93 CRI typical)
300 0 – D – 22
CCT Bin Options
22 = 2 SDCM
23 = 3 SDCM
Array Configuration
Color Targeting Designator
0 = Cold Targeted (2700K -4000K)
1 = Hot Targeted (3500K)
Flux Indicator
300x = 3000 lm
2
Product Selection Guide
The following product configurations are available:
Table 1:
Selection Guide, Pulsed Measurement Data (T
j
= T
c
= 25°C)
Part Number
BXRH-27E3000-D-23
BXRH-27G3000-D-23
BXRH-27H3000-D-23
BXRH-30E3000-D-23
BXRH-30G3000-D-23
BXRH-30H3000-D-23
BXRH-35A3001-D-23
8
BXRH-35G3000-D-23
BXRH-40E3000-D-23
BXRH-40G3000-D-23
Nominal
CCT
1
(K)
2700
2700
2700
3000
3000
3000
3500
3500
4000
4000
CRI
2
80
90
97
80
90
97
93
90
80
90
Nominal
Drive
Current (mA)
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
Typical Pulsed
Flux
3,4,5
T
c
= 25ºC (lm)
3477
2891
2782
3660
3074
2891
3074
3148
3880
3221
Minimum
Pulsed Flux
5,6
T
c
= 25ºC (lm)
2990
2487
2392
3148
2644
2487
2644
2707
3336
2770
Typical V
f
(V)
36.6
36.6
36.6
36.6
36.6
36.6
36.6
36.6
36.6
36.6
Typical
Power
(W)
36.6
36.6
36.6
36.6
36.6
36.6
36.6
36.6
36.6
36.6
Typical
Efficacy
(lm/W)
7
95
79
76
100
84
79
84
86
106
88
Table 2:
Selection Guide, Stabilized DC Performance (T
c
= 85°C)
9,10
Part Number
BXRH-27E3000-D-23
BXRH-27G3000-D-23
BXRH-27H3000-D-23
BXRH-30E3000-D-23
BXRH-30G3000-D-23
BXRH-30H3000-D-23
BXRH-35A3001-D-23
8
BXRH-35G3000-D-23
BXRH-40E3000-D-23
BXRH-40G3000-D-23
Notes for Tables 1 & 2:
1. Nominal CCT as defined by ANSI C78.377-2011.
2. CRI values are typical for Décor Series Ultra and Class A color points and minimums for all other color points. Minimum R9 value for 80 CRI products is
0, minimum R9 value for 90 CRI products is 50.
3. Products tested under pulsed condition (10 ms pulse width) at nominal test current where T
j
(junction temperature)
=
T
c
(case temperature)
=
25° C.
4. Typical performance values are provided as reference only and are not a guarantee of performance.
5. Bridgelux maintains a ± 7% tolerance on flux measurements.
6. Minimum flux values at the nominal test current are guaranteed by 100% production testing.
7. Typical efficacy is a function of lumen output. See example in Figure. 1.
8. Class A products are a revolutionary advancement in lighting designed to match how humans perceive and prefer light. Nominal CCT is defined by the
Lighting Research Center’s Class A definition. The center of the Class A color bin is on the corresponding isothermal line.
9. Typical stabilized DC performance values are provided as reference only and are not a guarantee of performance.
10. Typical performance is estimated based on operation under DC (direct current) with LED array mounted onto a heat sink with thermal interface
material and the case temperature maintained at 85°C. Values may vary depending on the thermal design of the luminaire and/or the exposed environ-
ment to which the product is subjected.
11. Minimum flux values at elevated temperatures are provided for reference only and are not guaranteed by 100% production testing. Values may vary
depending on the thermal design of the luminaire and/or the exposed environment to which the product is subjected.
I use a wavecom module to make a terminal. When testing data transmission, the following error occasionally occurs: WBCI: 0. Then the module's network indicator light is always on. AT+CPIN? returns +C...
First of all, I would like to thank [url]https://bbs.eeworld.com.cn/forum.php?mod=viewthread&tid=419383&highlight=getting%2Bstart%2Bwith%2Bbeaglebone[/url] for providing this valuable learning materia...
By Robert Taylor1 Most power supply designers know how to convert a higher voltage to a lower voltage (a buck converter) or a lower voltage to a higher voltage (a boost converter). But what if you wan...
Previously, it was pointing to the EXE in the WINDOWS directory. I just changed it to point to the program files, and it actually prompted that the program (or one of its components) could not be foun...
I made a single-chip minimum module, and used TXD and RXD to communicate with other modules, but I found that there was a problem with the communication. I don't know if it's the communication line or...
[i=s]This post was last edited by DavidZH on 2015-12-19 20:46[/i] I got this board as a gift from an event in Xintang. I'll give it to whoever needs it. It's unused anyway, so you just need to pay for...
Emergency hand-held lamps powered by 6V maintenance-free batteries are widely used in rural areas. The charger used is a transformer step-down and single diode half-wave rectifier, and the charging...[Details]
At present, the development of wireless power supply technology for electric vehicles (EVs) is becoming more and more active. In 2012, Volvo of Sweden established Volvo Technology Japan in Tokyo as...[Details]
Automotive applications are particularly sensitive to EMI events, which are unavoidable in a noisy electrical environment consisting of a central battery, bundled wiring harnesses, various inductiv...[Details]
In order to highlight the concept of "energy saving and environmental protection" of intelligent buildings, solar street lights are designed for intelligent communities. The inclination and capacit...[Details]
This paper designs a dot matrix LED text display screen that is easy to update, expandable, and low-cost. The way to reduce costs is
① Use the Bluetooth data transmission function of mobile ph...[Details]
Although it is relatively easy to check the stability of a simple amplifier at lower frequencies, it may be much more difficult to evaluate the stability of a more complex circuit. This artic...[Details]
From the PIC16F946 datasheet, we know that there are two ways to write values to the LCD for display:
1. Directly write the value to LCDDATA1~LCDDATA23
2. Use disconnect t...[Details]
Since the No. 4 blast furnace of Handan Iron and Steel was put into operation in 1993, its external equipment has been seriously aged, and the original PLC control system TDC3000 of the hot blast furn...[Details]
1. Introduction to CIF Board
Fieldbus integration based on PC system
Whether it is a master or a slave, fieldbus has won unanimous praise in the field of PC-based automation. For more...[Details]
PV inverter manufacturer SMA has launched its first DC arc fault circuit interrupter (AFCI) PV inverter and has received UL certification.
The new SunnyBoy AFCI inverter models include 3000-US...[Details]
With the advocacy and implementation of the government's Safe City Plan, the security market has increasingly higher requirements for the clarity of surveillance images. Imagine that after a case o...[Details]
Spatial Division Multiplexing (SDM) MIMO processing can significantly improve spectrum efficiency and thus greatly increase the capacity of wireless communication systems. Spatial Division Multip...[Details]
LED light sources have many environmental advantages, but early products still have certain technical bottlenecks in heat dissipation and high brightness design that cannot be broken through....[Details]
System Overview
The system consists of a signal preprocessing circuit, a single-chip computer AT89C2051, a systematic LED display module, a serial port data storage circuit and system software...[Details]
With the rapid development of wireless
digital communication
, more challenges have been raised for integrated circuit design and testing. In the product design stage, in order to ensure
t...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
