Y1758240K000A9L datasheet, PDF

Datasheet> All Categories > Passive components> Y1758240K000A9L

Y1758240K000A9L: DescriptionRES 240K OHM 2.5W 0.05% AXIAL; CategoryPassive components; File Size466KB，6 Pages; ManufacturerVishay; Websitehttp://www.vishay.com; Environmental Compliance

Download Datasheet Parametric View All

Y1758240K000A9L Overview

RES 240K OHM 2.5W 0.05% AXIAL

Y1758240K000A9L Parametric

Parameter Name	Attribute value
resistance	240 kOhms
Tolerance	±0.05%
Power (W)	2.5W
component	metal foil
characteristic	non-inductive
Temperature Coefficient	±0.2ppm/°C
Operating temperature	-55°C ~ 125°C
Package/casing	Axial
Supplier device packaging	-
size/dimensions	0.500" diameter x 1.500" length (12.70mm x 38.10mm)
Height - Installation (maximum)	-
Number of terminals	2
failure rate	-

Preview

Download Datasheet

View All

HZ Series (Z-Foil) with Zero TCR

Vishay Foil Resistors

New Generation of Secondary Standards Hermetically Sealed Construction Ultra High

Precision Z-Foil Technology Resistors with TCR of ± 0.2 ppm/°C, Tolerance of ± 0.001 %

and Load Life Stability of ± 0.002 % (Metrology, Laboratory, Instrumentation, Industrial)

FEATURES



Temperature coefficient of resistance (TCR):

± 0.2 ppm/°C typical (- 55 °C to + 125 °C,

+ 25 °C ref.). For ultra high performances

(instrumentation and metrology) please refer to

the last page



Resistance range: 5



to 1.1 M (higher or lower values of

resistance available)



Foil resistors are not restricted to standard values; specific

“as required” values can be supplied at no extra cost or

delivery (e.g. 1K2345 vs. 1K)



Power coefficient “R due to self heating”:

5 ppm at rated power with the Z-Foil technology



Tolerance:

to ± 0.001 % (10 ppm)



Load life stability to ± 0.002 % (20 ppm) at 25 °C, 2000 h

at rated power



Load life stability, can be considerably improved

through in-house stabilization



Shelf life stability: 2 ppm for at least 6 years

(unaffected by humidity)



Electrostatic discharge (ESD) up to 25 000 V



Power rating: 0.3 W to 2.5 W at + 25 °C (depending on

model - see table 2)



Non-inductive, non-capacitive design



Non hot spot design



Rise time: 1 ns effectively no ringing



Current noise: 0.010 µV

RMS

/V of applied voltage (< - 40 dB)



Thermal EMF: 0.05 µV/°C typical



Voltage coefficient: < 0.1 ppm/V



Thermal stabilization time < 1 s (nominal value achieved

within 10 ppm of steady state value)



Non-inductive: < 0.08 µH



Terminal finish available: lead (Pb)-free or tin/lead alloy



Impervious to harmful environments - oil filled



Prototype quantities available in just 5 working days

or sooner. For more information, please contact

foil@vishaypg.com



For better performances (values, TCR, tolerance, stability),

please contact us

INTRODUCTION

The Z-Foil based oil filled, hermetically sealed HZ Series

resistors represent an industry breakthrough. The hermetic

sealing eliminates the ingress of moisture and oxygen, while

the oil acts as a thermal conductor, thus eliminating

long-term degradation elements of unsealed resistors, while

at the same time allowing the device to accept short periods

of overload without degradation.

The Z-Foil technology provides a significant reduction of the

resistive components, sensitivity to ambient temperature

variations (TCR) and applied power changes (PCR). When

combined with the hermetic sealing and oil filling, the

HZ Series resistors become

the most precise and stable

resistors available.

They are used as the most precise

secondary standards for ultra precision metrology.

With accuracies of ± 0.001 % (10 ppm) and a resistance

range from 5



to 1.1 M and long term shelf life of less than

2 ppm, these devices are virtually secondary standards that

can be carried in sets for daily or periodic calibration of

factory measurement equipment.

The HZ Series is available with laboratory and metrology

level precision and long-term stability with additional

in-house oriented processes such as: chip stabilization,

special TCR plotting, additional treatments for ultra

stability and special post manufacturing operations

(PMO). (Please refer to the last page)

TABLE 1 - TCR VS. RESISTANCE VALUE

RESISTANCE VALUE

()

TYPICAL TCR AND

MAX. SPREAD

(- 55 °C to + 125 °C, + 25 °C ref.)

(ppm/°C)

± 0.2 ± 2

± 0.2 ± 3

± 0.2 ± 4

FIGURE 1 - SHELF LIFE - VHA518-11

12K9 VS. QHE

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

- 0.1

100 200 300 400 500 600 700 800 900 1000

100 to < 1M1

50 to < 100

5 to < 50

Note

• For maximum TCR < 1 ppm/°C, see VHP100 and contact

application engineering

Resistance Change (ppm)

Time (Days)

Document Number: 63120

Revision: 25-Mar-10

For any questions, contact:

foil@vishaypg.com

www.foilresistors.com

Recommended Resources

Automatic control solenoid valve commutation and pressurization drive circuit

STR80145 application circuit diagram b

Simple and reliable mains overvoltage protector circuit diagram

Telephone dial doubles as password lock circuit diagram

Color TV remote control 38

Analysis and debugging method of multi-stage tuned amplifier

Calculate matrix multiplication and display the result: [align=left] [font=宋体]Dear masters and kind people[/font];[/align][align=left] [font=宋体]If you pass by, please come and take a look and give us a hand. I am in urgent need of a program that can multip...; 475099103 51mcu

Hello everyone, may I ask...: I'm new to MSP430. I used to use 8051... After seeing how 430 I/O is used, I have some questions... For exampleP1OUT |= BIT0; //What does this mean? |= is an arithmetic expression? P1OUT = P1OUT | BIT...; 58262850 Microcontroller MCU

Confusion about the network card and RS232 interface: Why doesn’t the controller use a network card to communicate?: The book says: RS232 interface: It is the physical interface between the data transmission device and the transmission line. The computer is connected to the modem through the RS232 interface, and the...; fenglin51 Embedded System

How to check the sampling frequency: This code... I use the MSP430F5529 board and set the sampling frequency, but how can I get the specific value? ? P6SEL |= 0x01; // Enable A/D channel A0 ADC12CTL0 = ADC12ON+ADC12SHT0_8+ADC12MSC; // Tu...; zhwjkl Microcontroller MCU

Positive and negative power supply design based on MAX232: Based on the design of positive and negative power supply of MAX232, using charge pump, positive and negative power conversion....; qq849682862 Analog electronics

Can that expert help me with the assembly language questions? Emergency! ! ! !: Traffic light control system design content and requirements: Use 8255A to control the state of traffic lights through assembly program, and use 8259A to control the state of traffic lights in emergen...; voyage1999 Embedded System

Shortcut: S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 SA SB SC SD SE SF SG SH SI SJ SK SL SM SN SO SP SQ SR SS ST SU SV SW SX SY SZ T0 T1 T2 T3 T4 T5 T6 T7 T8 T9 TA TB TC TD TE TF TG TH TI TJ TK TL TM TN TO TP TQ TR TS TT TU TV TW TX TY TZ U0 U1 U2 U3 U4 U6 U7 U8 UA UB UC UD UE UF UG UH UI UJ UK UL UM UN UP UQ UR US UT UU UV UW UX UZ V0 V1 V2 V3 V4 V5 V6 V7 V8 V9 VA VB VC VD VE VF VG VH VI VJ VK VL VM VN VO VP VQ VR VS VT VU VV VW VX VY VZ W0 W1 W2 W3 W4 W5 W6 W7 W8 W9 WA WB WC WD WE WF WG WH WI WJ WK WL WM WN WO WP WR WS WT WU WV WW WY X0 X1 X2 X3 X4 X5 X7 X8 X9 XA XB XC XD XE XF XG XH XK XL XM XN XO XP XQ XR XS XT XU XV XW XX XY XZ Y0 Y1 Y2 Y4 Y5 Y6 Y9 YA YB YC YD YE YF YG YH YK YL YM YN YP YQ YR YS YT YX Z0 Z1 Z2 Z3 Z4 Z5 Z6 Z8 ZA ZB ZC ZD ZE ZF ZG ZH ZJ ZL ZM ZN ZP ZR ZS ZT ZU ZV ZW ZX ZY

Popular Components