and/or trademarks of Altera Corporation in the U.S. and other countries. All other trademarks and service marks are the property of their respective holders as described at
www.altera.com/common/legal.html.
Altera warrants performance of its semiconductor products to current specifications in accordance with Altera’s standard warranty, but
reserves the right to make changes to any products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any
information, product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device
specifications before relying on any published information and before placing orders for products or services.
Arria II Device Handbook Volume 3: Device Datasheet and Addendum
December 2013
Subscribe
1–2
Chapter 1: Device Datasheet for Arria II Devices
Electrical Characteristics
c
Conditions beyond those listed in
Table 1–1
and
Table 1–2
may cause permanent
damage to the device. Additionally, device operation at the absolute maximum
ratings for extended periods of time may have adverse effects on the device.
Table 1–1
lists the absolute maximum ratings for Arria II GX devices.
Table 1–1. Absolute Maximum Ratings for Arria II GX Devices
Symbol
V
CC
V
CCCB
V
CCBAT
V
CCPD
V
CCIO
V
CCD_PLL
V
CCA_PLL
V
I
I
OUT
V
CCA
V
CCL_GXB
V
CCH_GXB
T
J
T
STG
Description
Supplies power to the core, periphery, I/O registers, PCI Express
®
(PIPE) (PCIe) HIP block, and transceiver PCS
Supplies power for the configuration RAM bits
Battery back-up power supply for design security volatile key register
Supplies power to the I/O pre-drivers, differential input buffers, and
MSEL circuitry
Supplies power to the I/O banks
Supplies power to the digital portions of the PLL
Supplies power to the analog portions of the PLL and device-wide
power management circuitry
DC input voltage
DC output current, per pin
Supplies power to the transceiver PMA regulator
Supplies power to the transceiver PMA TX, PMA RX, and clocking
Supplies power to the transceiver PMA output (TX) buffer
Operating junction temperature
Storage temperature (no bias)
Minimum
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–25
—
—
—
–55
–65
Maximum
1.35
1.8
3.75
3.75
3.9
1.35
3.75
4.0
40
3.75
1.21
1.8
125
150
Unit
V
V
V
V
V
V
V
V
mA
V
V
V
°C
°C
Table 1–2
lists the absolute maximum ratings for Arria II GZ devices.
Table 1–2. Absolute Maximum Ratings for Arria II GZ Devices (Part 1 of 2)
Symbol
V
CC
V
CCCB
V
CCPGM
V
CCAUX
V
CCBAT
V
CCPD
V
CCIO
V
CC_CLKIN
V
CCD_PLL
V
CCA_PLL
V
I
I
OUT
Description
Supplies power to the core, periphery, I/O registers, PCIe HIP block, and
transceiver PCS
Power supply to the configuration RAM bits
Supplies power to the configuration pins
Auxiliary supply
Supplies battery back-up power for design security volatile key register
Supplies power to the I/O pre-drivers, differential input buffers, and
MSEL circuitry
Supplies power to the I/O banks
Supplies power to the differential clock input
Supplies power to the digital portions of the PLL
Supplies power to the analog portions of the PLL and device-wide
power management circuitry
DC input voltage
DC output current, per pin
Minimum
-0.5
-0.5
-0.5
-0.5
-0.5
-0.5
-0.5
-0.5
-0.5
-0.5
-0.5
-25
Maximum
1.35
1.8
3.75
3.75
3.75
3.75
3.9
3.75
1.35
3.75
4.0
40
Unit
V
V
V
V
V
V
V
V
V
V
V
mA
Arria II Device Handbook Volume 3: Device Datasheet and Addendum
December 2013 Altera Corporation
Chapter 1: Device Datasheet for Arria II Devices
Electrical Characteristics
1–3
Table 1–2. Absolute Maximum Ratings for Arria II GZ Devices (Part 2 of 2)
Symbol
V
CCA_L
V
CCA_R
V
CCHIP_L
V
CCR_L
V
CCR_R
V
CCT_L
V
CCT_R
V
CCL_GXBLn
(1)
V
CCL_GXBRn
(1)
V
CCH_GXBLn
(1)
V
CCH_GXBRn
(1)
T
J
T
STG
Description
Supplies transceiver high voltage power (left side)
Supplies transceiver high voltage power (right side)
Supplies transceiver HIP digital power (left side)
Supplies receiver power (left side)
Supplies receiver power (right side)
Supplies transmitter power (left side)
Supplies transmitter power (right side)
Supplies power to the transceiver PMA TX, PMA RX, and clocking (left
side)
Supplies power to the transceiver PMA TX, PMA RX, and clocking (right
side)
Supplies power to the transceiver PMA output (TX) buffer (left side)
Supplies power to the transceiver PMA output (TX) buffer (right side)
Operating junction temperature
Storage temperature (no bias)
Minimum
-0.5
-0.5
-0.5
-0.5
-0.5
-0.5
-0.5
-0.5
-0.5
-0.5
-0.5
-55
-65
Maximum
3.75
3.75
1.35
1.35
1.35
1.35
1.35
1.35
1.35
1.8
1.8
125
150
Unit
V
V
V
V
V
V
V
V
V
V
V
°C
°C
Note to
Table 1–2:
(1) n = 0, 1, or 2.
Maximum Allowed Overshoot and Undershoot Voltage
During transitions, input signals may overshoot to the voltage shown in
Table 1–3
and
undershoot to –2.0 V for magnitude of currents less than 100 mA and periods shorter
than 20 ns.
Table 1–3
lists the Arria II GX and GZ maximum allowed input overshoot voltage and
the duration of the overshoot voltage as a percentage over the device lifetime. The
maximum allowed overshoot duration is specified as a percentage of high-time over
the lifetime of the device. A DC signal is equivalent to 100% duty cycle. For example,
a signal that overshoots to 4.3 V can only be at 4.3 V for 5.41% over the lifetime of the
device; for a device lifetime of 10 years, this amounts to 5.41/10ths of a year.
December 2013
Altera Corporation
Arria II Device Handbook Volume 3: Device Datasheet and Addendum
1–4
Chapter 1: Device Datasheet for Arria II Devices
Electrical Characteristics
Table 1–3. Maximum Allowed Overshoot During Transitions for Arria II Devices
Symbol
Description
Condition (V)
4.0
4.05
4.1
4.15
4.2
4.25
V
I
(AC)
AC Input Voltage
4.3
4.35
4.4
4.45
4.5
4.55
4.6
Overshoot Duration as % of
High Time
100.000
79.330
46.270
27.030
15.800
9.240
5.410
3.160
1.850
1.080
0.630
0.370
0.220
Unit
%
%
%
%
%
%
%
%
%
%
%
%
%
Maximum Allowed I/O Operating Frequency
Table 1–4
lists the maximum allowed I/O operating frequency for Arria II GX I/Os
using the specified I/O standards to ensure device reliability.
Table 1–4. Maximum Allowed I/O Operating Frequency for Arria II GX Devices
I/O Standard
HSTL-18 and HSTL-15
SSTL -15
SSTL-18
2.5-V LVCMOS
3.3-V and 3.0-V LVTTL
3.3-V, 3.0-V, 1.8-V, and 1.5-V LVCMOS
PCI and PCI-X
SSTL-2
1.2-V LVCMOS HSTL-12
200
250
I/O Frequency (MHz)
333
400
333
260
Arria II Device Handbook Volume 3: Device Datasheet and Addendum
December 2013 Altera Corporation
Chapter 1: Device Datasheet for Arria II Devices
Electrical Characteristics
1–5
Recommended Operating Conditions
This section lists the functional operation limits for AC and DC parameters for
Arria II GX and GZ devices. All supplies are required to monotonically reach their
full-rail values without plateaus within t
RAMP
.
Table 1–5
lists the recommended operating conditions for Arria II GX devices.
Table 1–5. Recommended Operating Conditions for Arria II GX Devices
(Note 1)
(Part 1 of 2)
Symbol
V
CC
V
CCCB
V
CCBAT
(2)
V
CCPD
(3)
Description
Supplies power to the core, periphery, I/O
registers, PCIe HIP block, and transceiver
PCS
Supplies power to the configuration RAM
bits
Battery back-up power supply for design
security volatile key registers
Supplies power to the I/O pre-drivers,
differential input buffers, and MSEL
circuitry
Condition
—
Minimum
0.87
Typical
0.90
Maximum
0.93
Unit
V
—
—
—
—
—
—
—
—
—
—
—
1.425
1.2
3.135
2.85
2.375
3.135
2.85
2.375
1.71
1.425
1.14
0.87
1.50
—
3.3
3.0
2.5
3.3
3.0
2.5
1.8
1.5
1.2
0.90
1.575
3.3
3.465
3.15
2.625
3.465
3.15
2.625
1.89
1.575
1.26
0.93
V
V
V
V
V
V
V
V
V
V
V
V
V
CCIO
Supplies power to the I/O banks
(4)
V
CCD_PLL
V
CCA_PLL
V
I
V
O
V
CCA
V
CCL_GXB
V
CCH_GXB
T
J
Supplies power to the digital portions of the
PLL
Supplies power to the analog portions of
the PLL and device-wide power
management circuitry
DC Input voltage
Output voltage
Supplies power to the transceiver PMA
regulator
Supplies power to the transceiver PMA TX,
PMA RX, and clocking
Supplies power to the transceiver PMA
output (TX) buffer
Operating junction temperature
—
—
—
—
—
—
—
Commercial
Industrial
2.375
–0.5
0
2.375
1.045
1.425
0
–40
2.5
—
—
2.5
1.1
1.5
—
—
2.625
3.6
V
CCIO
2.625
1.155
1.575
85
100
V
V
V
V
V
V
°C
°C
December 2013
Altera Corporation
Arria II Device Handbook Volume 3: Device Datasheet and Addendum
I'm new here, please help. I saw a font called Comic Sans MS on the Internet. It looks good, but it doesn't seem to be included in IAR. Can I add it? It doesn't seem to be as easy as adding it in Word...
[size=4][color=blue][b]>>[/b][/color][/size][url=https://mp.weixin.qq.com/s/HDSh-_V69APRAvvsVuNlLA][size=4][color=blue][b]Read the original text to participate in the event[/b][/color][/size][/url] [s...
I have a sensor on hand, and after a rough test, I found that the sensor consists of two coils.
One coil is used to generate a magnetic field of a certain size, and the other coil is used to detect th...
I just got the MSP432P401R LaunchPad a few days ago. I saw that it also supports Keil development, so I was happy to use Keil. I followed the USER Guide process. There is no problem with compilation, ...
Wearable network refers to a new type of personal area network (PAN) based on short-range wireless communication technology (Bluetooth and ZigBee technology, etc.) and wearable computer (wearcomp) tec...
The company is an electronic equipment company and is going to purchase some equipment recently. The R&D department currently only has a multimeter and an oscilloscope. What other equipment is needed?...
Hardware designers have begun to adopt FPGA technology in high-performance DSP designs because it can provide 10-100 times faster computing than PC-based or microcontroller-based solutions. Previou...[Details]
This article discusses how to wake up a touch-sensitive device such as a tablet without touching the device, using basic gesture recognition and novel proximity sensors. The article discusses the p...[Details]
0 Introduction
With the development of my country's economy, the number of motor vehicles continues to increase. The growth of existing roads and other hardware facilities can no longer meet t...[Details]
1 Introduction
With the acceleration of the pace of urban modernization, society has higher requirements for urban road lighting and urban lighting projects. The state has clearly required tha...[Details]
To differentiate their products in a crowded and competitive market, manufacturers of handheld devices often consider battery life and power management as key selling points for cell phones, PDAs, ...[Details]
July 11, 2012, Beijing - Altera Corporation (NASDAQ: ALTR) today announced the launch of 40-Gbps Ethernet (40GbE) and 100-Gbps Ethernet (100GbE) intellectual property (IP) core products. These core...[Details]
Images in science fiction movies often break through the limits of reality, such as in the movie "Minority Report." Tom Cruise uses a multi-touch screen to browse information. Capacitive sensing te...[Details]
In the previous series, we have listed some basic knowledge of C language in Tables 1 to 3. We hope that beginners can strengthen their memory of the above tables and gradually learn to use them wh...[Details]
This week, Microsoft held its 2012 Microsoft Worldwide Partner Conference (WPC) in Toronto, Canada. At the conference, Microsoft showed its new products and services to partners around the world. A...[Details]
Xiaomi, a well-known Internet phone in mainland China, won a million-unit order contract from China Unicom on November 20 last year, which made Xiaomi famous in mainland China. In April this year...[Details]
In the single-chip microcomputer system, in addition to display devices, sound devices are often used, and the most common sound device is the buzzer. Buzzers are generally used for some low-demand...[Details]
Key Points
1. Now, in addition to high-end smartphones and tablets, users also expect to use touch screens in other applications, and they are gradually appearing in cars and instruments.
...[Details]
Infrared remote control is widely used in home appliances, but the remote controls produced are not compatible with each other. The universal remote controls commonly seen on the market can only co...[Details]
0 Introduction
In the design and construction of communication systems,
communication power supply
is called the heart of the communication system. The power supply system will dire...[Details]
Synchronous buck designs are becoming increasingly difficult, and the selection of suitable ICs is becoming quite narrow. This Design Idea combines a current-mode PWM IC used in a flyback regulator...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
