RAFIX 16
2
General data
RAFIX 16 control component range
• For a mounting hole diameter of 16.2 mm to IEC 60947
• 250V/6A max.
• Water-jet proof IP65
• Contact blocks: Gold and silver contacts with quick-connect terminals 2.8 x 0.8 mm; Option: PCB plug-in socket
• 3 collar shapes, low-profile design
• The lamps of the pushbuttons can be replaced from the front or rear.
• The contact blocks snap directly onto the actuators without a coupling element and can be easily removed by turning
= cost reducing assembly.
The specified data apply only if actuators/signal indicators are combined with contact blocks and lamp sockets within the
same product range.
RAFIX
16
Content
RAFIX 16 pushbutton
RAFIX 16 pushbutton, flush lens, square collar
RAFIX 16 pushbutton, protruding lens, square collar
RAFIX 16 pushbutton, protruding collar, square collar
RAFIX 16 pushbutton, flush lens, round collar
RAFIX 16 pushbutton IP66 with protective cap
RAFIX 16 pushbutton, protruding lens, round collar
RAFIX 16 pushbutton, protruding collar, round collar
RAFIX 16 pushbutton, flush lens, square collar, alignable without gaps
RAFIX 16 selector switch
RAFIX 16 selector switch, square collar
RAFIX 16 selector switch, round collar
RAFIX 16 selector switch, square collar, alignable without gaps
RAFIX 16 keylock switch MICROMEC
RAFIX 16 keylock switch MICROMEC, square collar
RAFIX 16 keylock switch MICROMEC, round collar
RAFIX 16 keylock switch MICROMEC, square collar, alignable without gaps
RAFIX 16 keylock switch, RONIS
RAFIX 16 keylock switch, RONIS, square collar
RAFIX 16 keylock switch, RONIS, round collar
RAFIX 16 keylock switch, RONIS, square collar, alignable without gaps
RAFIX 16 mushroom-headed pushbutton
RAFIX 16 mushroom-headed pushbutton, square collar
RAFIX 16 mushroom-headed pushbutton, round collar
RAFIX 16 mushroom-headed pushbutton, square collar, alignable without gaps
2- 8
2- 9
2 - 10
2 - 11
2 - 12
2 - 13
2 - 14
2 - 15
2 - 16
2 - 18
2 - 19
2 - 20
2 - 21
2 - 22
2 - 23
2 - 24
2 - 25
2 - 26
2 - 27
2 - 28
2 - 29
2 - 30
2 - 31
2 - 31
2 - 32
Control components
Stock items
are marked
by
bold printed
order numbers.
2-3
RAFIX 16
RAFIX 16 emergency stop pushbutton
RAFIX 16 emergency stop pushbutton, square collar, illuminated
RAFIX 16 emergency stop pushbutton, square collar, dupe-proof
RAFIX 16 emergency stop pushbutton, round collar, illuminated
RAFIX 16 emergency stop pushbutton, round collar, dupe-proof
RAFIX 16 emergency stop pushbutton, square collar, alignable without gaps, illuminated
RAFIX 16 emergency stop pushbutton, square collar, alignable without gaps, dupe-proof
RAFIX 16 safety emergency stop pushbutton, round collar, dupe-proof, non-blocking
RAFIX 16 safety emergency stop pushbutton, round collar, conical, dupe-proof, non-blocking
RAFIX 16 toggle switch
RAFIX 16 toggle switch, square collar
RAFIX 16 toggle switch, round collar
RAFIX 16 toggle switch, square collar, alignable without gaps
RAFIX 16 potentiometer drive
RAFIX 16 potentiometer drive, square collar
RAFIX 16 potentiometer drive, round collar
RAFIX 16 potentiometer drive, square collar, alignable without gaps
RAFIX 16 buzzer
RAFIX 16 buzzer, square collar
RAFIX 16 buzzer, round collar
RAFIX 16 buzzer, square collar, alignable without gaps
RAFIX 16 signal indicator
RAFIX 16 signal indicator, square lens
RAFIX 16 signal indicator, square collar, flush lens
RAFIX 16 signal indicator, square collar, protruding lens
RAFIX 16 signal indicator, round lens
RAFIX 16 signal indicator, round collar, flush lens
RAFIX 16 signal indicator, round collar, protruding lens
RAFIX 16 signal indicator, square collar, alignable without gaps, flush lens
RAFIX 16 signal indicator, square collar, alignable without gaps, protruding lens
RAFIX 16 contact blocks with gold contacts
RAFIX 16 standard contact block, gold contacts, with lamp socket
RAFIX 16 standard contact block, gold contacts, without lamp socket
RAFIX 16 universal contact block, gold contacts, with lamp socket
RAFIX 16 universal contact block, gold contacts, without lamp socket
RAFIX 16 contact blocks with silver contacts
RAFIX 16 standard contact block, silver contacts, with lamp socket
RAFIX 16 standard contact block, silver contacts, without lamp socket
RAFIX 16 universal contact block, silver contacts, with lamp socket
RAFIX 16 universal contact block, silver contacts, without lamp socket
RAFIX 16 lamp socket
RAFIX 16 lamp socket W 2 x 4.6 d
RAFIX 16 lamp socket W 2 x 4.6 d
RAFIX 16 special accessories
PCB plug-in socket
Multipole connector
Female quick-connect terminal DIN 46340-B 2.8-1-MS
Plug distributor
Protection against contact
Protection against contact
Series capacitor
Disassembly tool
Protective cover, suitable for lead seal, for pushbuttons, alignable without gaps
Fixing spanner for hexagon nut
RAFIX 16 insulating housing
RAFIX 16 label holder, flush, for square collar
RAFIX 16 label holder, flush, for round collar
RAFIX 16 label holder, protruding, for square flush fitting collar
Emergency stop label, yellow, round 60 mm, PVC adhesive
2 - 34
2 - 35
2 - 35
2 - 36
2 - 36
2 - 37
2 - 37
2 - 38
2 - 38
2 - 40
2 - 41
2 - 41
2 - 42
2 - 44
2 - 45
2 - 45
2 - 46
2 - 48
2 - 49
2 - 49
2 - 50
2 - 52
2 - 53
2 - 53
2 - 54
2 - 54
2 - 55
2 - 55
2 - 56
2 - 56
2 - 58
2 - 60
2 - 60
2 - 61
2 - 61
2 - 62
2 - 64
2 - 64
2 - 65
2 - 65
2 - 66
2 - 67
2 - 68
2 - 70
2 - 70
2 - 71
2 - 71
2 - 72
2 - 72
2 - 73
2 - 73
2 - 74
2 - 74
2 - 75
2 - 75
2 - 76
2 - 76
2 - 77
2 - 77
2
RAFIX
16
2-4
Stock items
are marked
by
bold printed
order numbers.
Control components
RAFIX 16
General information
RAFIX 16 is a complete control component series for a mounting hole diameter of 16.2 mm. It enables you to design
attractive control panels with a minimum of space requirements and at the same time sufficiently large actuating areas.
Actuators
– Mounting hole ø 16.2 mm to DIN EN 50 007
Contact blocks
– Standard (for actuators with one-way operation)
• with latching mechanism (latching switch)
• without latching mechanism (momentary switch)
– Universal (for actuators with two-way operation, e. g.
selector switches)
• without latching mechanism
Contact material
– Silver contacts for mains voltage
– Gold contacts for electronic circuits
Illumination
- Wedge base lamp W 2 x 4.6 d
Assembly
–
–
–
–
Single-handed cost-effectiv assembly method
Panel thickness 0.5 … 5 mm
Fixing with hexagon nut
Starting torque 1.2 Nm max.
2
RAFIX
16
Shock-resistance according to IEC 600 68-2-27
– Shock amplitude:
≤
50 g
– Shock time: 11 ms
– Shock type: half sinusoidal
– Locating lug (easily removable).
The locating lug can be easily removed using a screw-
driver.
– Degree of protection IP 65 on panel.
This is achieved by a reliable, tried and tested special
seal.
– Grid spacing 25 x 25 mm
– Low-profile design, 7 mm height from front panel
– Three collar shapes, in black
• Square 25 x 25 mm
• Round 25 mm
• Square 25 x 25 mm, alignable in flush fitting rows,
which avoids accumulation of dirt between the collars.
Environment conditions
– Constant environment: acc. to IEC 600 68-2-3 and 2-30
– Variable environment: acc. to IEC 600 68-2-14 and 2-33
Temperature range
– Operating temperature:
non-illuminated: - 25 … + 70 ° C
illuminated: - 25 … + 55° C
– Storage temperature: - 40 … + 85° C
Control Components
2-5
RAFIX 16
CE-Conformity RAFIX 16
Combination
actuator and
contact block
Order no.
Limit
EU-Directive
NSR 73/23
Ma. Dir. 89/392
®
All actuators
All contact blocks with silver contacts
Emergency stop
Contact blocks with silver contacts
Emergency stop, Universal
contact blocks with gold contacts
Signal indicator
lamp socket
1.3007–.– – –
1.2012–.– – –
1.30074.– – –
1.20123.– – –
1.30074.– – –
1.20123.– – –
1.62124.– – –
1.71212.– – –
6(4) A/250 V AC
6(4) A/250 V AC
250 mA/42 V AC/DC
1,2 W/60 V AC/DC
G
G
–
G
–
G
G
–
2
Assembly
RAFIX
16
– Insert the actuator through the panel cut-out from the
front.
If there is no locating indent provided in the cut-out,
first remove the locating lug using a screwdriver.
– Screw the hexagon nut onto the actuator or signal
indicator from the rear and tighten it using a fixing
spanner.
– Slide the contact block onto the actuator from the rear
with an audible click.
– Install protection against accidental contact, if
applicable.
– Connect quick-connect terminals.
– Alternatively, connect crimped female quick-connect
terminals to multipole connector and plug it onto the
contact block.
– Alternatively, conntact the plug-in socket soldered onto
Assembly/Disassembly
Disassembly
– Turn the contact block by approx. 20° to the left or
right – the latches open.
– Pull the contact block off towards the rear
(commercially available flat nose pliers recommended).
To dismount a PCB, pull the PCB with the soldered plug-in
sockets off the mounted contact blocks.
2-6
Control Components
RAFIX 16
Legending
All elements can be labelled using a separate label holder.
The label holder is mounted together with the actuator/
signal indicator. For order numbers and standard legend,
refer to the section ”Legending”. Non-illuminated push-
buttons and mushroom-headed pushbuttons can be
printed or laser engraved.
All illuminated pushbuttons and the majority of the signal
indicators can be labelled by means of legend inserts.
The legend inserts are fitted between actuator body and
lens and can be easily changed.
Rafi can also provide you custom legending. Price and
delivery on request.
Lamp replacement from front
Use the disassembly tool to grasp the actuator body and
pull it towards the front with the lens.
Alternatively, you can use a screwdriver in place of the
disassembly tool. In this case, insert the screwdriver
between actuator body and collar and carefully raise the
actuator body.
Replace the lamp using a lamp extractor or a suitable
insulation sleeve.
2
RAFIX
16
Lamp replacement from front
Control Components
2-7
京公网安备 11010802033920号
EEWORLD
