To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
FPF2024/25/26/27 — Full Function Load Switch with 100 mA Current Limit
April 2016
FPF2024/25/26/27
Full Functional Load Switch with 100 mA Current Limit
Features
1.6 V to 5.5 V Input Voltage Range
Ultra Low Average Quiescent Current 1 μA
Typical at1.8 V
Typical R
DS(ON)
= 225 mΩ at V
IN
= 3.3 V
Typical R
DS(ON)
= 280 mΩ at V
IN
= 1.8 V
100 mA Fixed Current Limit Minimum
Under-Voltage Lockout (UVLO)
CMOS and Open Drain Fault Flag Options
Fault Blanking
Auto Restart
Thermal Shutdown
ESD Protection
Description
The FPF2024/5/6/7 are low R
DS(ON)
P-Channel MOSFET
load switches with 150 mA typical current limit value
targeting small package load switch applications. The
extended input voltage range spans from 1.6 V to 5.5 V
to fulfill today's ultra-portable device's supply
requirements. Switch control is by a logic input (ON)
capable of interfacing directly with a low voltage control
signal.
The FPF2024/25/26/27 respond to an output overload
condition by going into constant current mode where the
output current is regulated by the load switch. If the
over-current condition persists beyond the 10 ms
Blanking Time, the FPF2024 and FPF2025 pull the fault
signal pin (FLAGB) low and shut-off the switch. An Auto-
Restart feature turns the FPF2024 and FPF2025 on
again after 70 ms if the ON pin is still active. The
FPF2026 has a Latch-Off feature which shuts off the
switch off after the expiration of the 10 ms Blanking
Time and keeps it off until the ON pin is toggled. The
FPF2027 responds to an overload condition by
immediately pulling the fault signal pin LOW and the
switch remains in constant current mode until the output
overload condition is removed. The FPF2027 has a
Startup Blanking feature which prevents startup
transient over-current conditions from triggering the fault
signal pin for 10 ms after initial turn on via the ON pin.
These parts are available in a space-saving 6-ball
京公网安备 11010802033920号
EEWORLD
