3M 7419 0.75" X 0.75"-250 datasheet, PDF

Datasheet> All Categories > accessories> 3M 7419 0.75" X 0.75"-250

3M 7419 0.75" X 0.75"-250: DescriptionTAPE FILM AMB 3/4"X 3/4" 250/RL; Categoryaccessories; File Size43KB，3 Pages; Manufacturer3M; Websitehttp://3M.com/esd; Environmental Compliance

Download Datasheet Parametric View All

3M 7419 0.75" X 0.75"-250 Overview

TAPE FILM AMB 3/4"X 3/4" 250/RL

3M 7419 0.75" X 0.75"-250 Parametric

Parameter Name	Attribute value
Tape type	thin film
Adhesive	acrylic acid
base fabric, carrier	Polyimide
thickness	0.0018"（1.8 mils，0.046mm）
Thickness - Adhesive	0.0008"（0.8 mils，0.021mm）
Thickness - base fabric, carrier	0.0010"（1.0 mils，0.025mm）
width	0.75"（19.05mm）3/4"
length	0.75"（19.05mm）3/4"
color	amber
use	-
temperature range	-
shelf life	18 months
Shelf life start date	Delivery date

Preview

Download Datasheet

View All

Technical Data

August 2014

™

Low Static Polyimide Film Tape 7419

Product Description

3M™ Low Static, Non-Silicone Polyimide Film Tape 7419 with DuPont™ Kapton

polyimide film and acrylic adhesive is

amber-colored and used for PCB solder masking and other high temperature applications.

Features and Benefits

• Specially formulated acrylic adhesive is resistant to typical solder mask temperatures for short periods of time.

Stays firmly in place during processing and removes cleanly from typical electronic substrates even after 10 min

@ 260°C (500°F).

• Non-silicone adhesive formulation lessens the potential for silicone contamination which can interfere with

subsequent bonding or conformal coating operations.

• The high temperature acrylic adhesive also has excellent chemical resistance and should be considered for

demanding chemical masking applications.

• Product is wound on a polyethylene tape core.

Product Construction/Material Description

3M™ Low Static Polyimide Film Tape 7419

Color

Backing

Adhesive

Standard Roll Length

Amber

Dupont™ Kapton

Polyimide Film

Acrylic

33 m (36 yd)

Applications

• Masking or protecting residue sensitive areas on printed circuit boards during high temperature operations such

as wave soldering and solder reflow.

™

Low Static Polyimide Film Tape 7419

Safety Data Sheet

Consult Safety Data Sheet before use.

Regulatory

For regulatory information about this product, contact your 3M representative.

Technical Information

The technical information, recommendations and other statements contained in this document are based upon tests

or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed.

Product Use

Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance

of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M

product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose

and suitable for user’s method of application.

Warranty, Limited Remedy, and Disclaimer

Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature,

3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product.

3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY

IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED

WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product

does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product

or refund of the purchase price.

Limitation of Liability

Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether

direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract,

negligence or strict liability.

Electronics Materials Solutions Division

3M Center, Building 225-3S-06

St. Paul, MN 55144-1000

1-800-251-8634 phone

651-778-4244 fax

www.3M.com/electronics

DuPont™ and Kapton

are trademarks of E. I. du Pont

de Nemours and Company or its affiliates.

3M is a trademark of 3M Company.

Please recycle.

60-5002-0112-8

(3)

Recommended Resources

Forward and reverse control circuit using reverse switch

Simple and reliable short circuit protector circuit

LT1054 application negative voltage regulator circuit diagram

Homemade gas automatic electronic igniter circuit

hypoxia alarm

555 simple printing and placing exposure timer circuit

msp430x15x 430x16x 430x161x datasheet: msp430x15x 430x16x 430x161x datasheet [[i] This post was last edited by guanglin on 2011-8-2 11:06[/i]]...; guanglin Microcontroller MCU

I am a novice and want to learn how to port ucgui under stm32. How should I start?: I am a novice who wants to learn how to port ucgui under stm32. I have found some information, which are basically ucgui manuals. I don't know how to start. I want to find a video to learn, but I can'...; 1989despair Real-time operating system RTOS

Question about MSP430F6736 UCS!: I made a board with 6736. When initializing UCS, the initialization code is as follows: PJDIR |= BIT0 | BIT1 | BIT3; // ACLK, MCLK, SMCLK set out to pins PJSEL |= BIT0 | BIT1 | BIT3; // PJ.0,1,3 for d...; qdavid64 Microcontroller MCU

FPGA SPI Communication Discussion: I am doing a small experiment of FPGA and MCU communication, and I have encountered a problem. Please guide me. The current situation is that the MCU runs first, and then the FPGA starts to run, and t...; cclcxy FPGA/CPLD

C2000 Power-on Boot Mode Analysis: When using C2000, engineers often say that the chip simulation can run, but the stand-alone run cannot run; or when debugging, reset the chip > run, and find that the program cannot run. The main reas...; Jacktang Microcontroller MCU

[Help] Please help me look at this circuit. + voltage has no output, - voltage is normal: After power on, Q9 G pole has 4V voltage (normally there is no voltage), D pole has 0.7V (normally 5V), I don't know where the fault is, please help me analyze it...; 卟呤、卟呤 Analogue and Mixed Signal

Shortcut: S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 SA SB SC SD SE SF SG SH SI SJ SK SL SM SN SO SP SQ SR SS ST SU SV SW SX SY SZ T0 T1 T2 T3 T4 T5 T6 T7 T8 T9 TA TB TC TD TE TF TG TH TI TJ TK TL TM TN TO TP TQ TR TS TT TU TV TW TX TY TZ U0 U1 U2 U3 U4 U6 U7 U8 UA UB UC UD UE UF UG UH UI UJ UK UL UM UN UP UQ UR US UT UU UV UW UX UZ V0 V1 V2 V3 V4 V5 V6 V7 V8 V9 VA VB VC VD VE VF VG VH VI VJ VK VL VM VN VO VP VQ VR VS VT VU VV VW VX VY VZ W0 W1 W2 W3 W4 W5 W6 W7 W8 W9 WA WB WC WD WE WF WG WH WI WJ WK WL WM WN WO WP WR WS WT WU WV WW WY X0 X1 X2 X3 X4 X5 X7 X8 X9 XA XB XC XD XE XF XG XH XK XL XM XN XO XP XQ XR XS XT XU XV XW XX XY XZ Y0 Y1 Y2 Y4 Y5 Y6 Y9 YA YB YC YD YE YF YG YH YK YL YM YN YP YQ YR YS YT YX Z0 Z1 Z2 Z3 Z4 Z5 Z6 Z8 ZA ZB ZC ZD ZE ZF ZG ZH ZJ ZL ZM ZN ZP ZR ZS ZT ZU ZV ZW ZX ZY

Popular Components