Technical Data
September 2014
3M
™
Polyimide Film Tape 5413
Product Description
3M™ Polyimide Film Tape 5413 with DuPont™ Kapton
®
polyimide film and silicone adhesive used for PCB solder
masking and other high temperature applications. This product is amber colored and 2.7 mil (69 microns) thick.
Features and Benefits
• The DuPont™ Kapton
®
polyimide film does not soften at elevated temperatures, thus the film provides an
excellent release surface at elevated temperatures
• Is dimensionally stable at high temperatures, which helps reduce rework, helping to enable high productivity
• Is flame retardant, chemical and radiation resistant which helps protect surfaces to help reduce replacement costs
• The silicone adhesive’s high temperature performance helps reduce adhesive transfer which helps to eliminate
cleaning, enabling high productivity
• Polyethylene tape core instead of cardboard
Product Construction
3M™ Polyimide Film Tape 5413
Backing
Adhesive
Color
Standard Roll Length
Dupont™ Kapton
®
Polyimide Film
Silicone
Amber
33 m (36 yd)
Application Ideas
• Mask for protection of gold fingers of printed circuit boards during wave solder or solder dip process.
• Release surface in fabrication of parts cured at elevated temperatures.
3M
™
Polyimide Film Tape 5413
Typical Physical Properties
Note:
The following technical information and data should be considered representative or typical only, and should not
be used for specification purposes.
3M™ Polyimide Film Tape 5413
Property
Adhesion to Steel:
Tensile Strength at Break:
Elongation at Break:
Backing Thickness:
Total Tape Thickness:
Temperature Use Range:
Dielectric Strength:
Outgassing:
Value
22 oz/in width (24 N/100 mm)
33 lb/in width (578 N/100 mm)
62%
1.0 mil (0.03 mm)
2.7 mil (0.07 mm)
-73° to 260°C (-100° to 500°F)
7000 volts
%TLM = 1.50; %CVCM = 0.50
ASTM Test Method
D-3330
D-3579
D-3579
D-3652
D-3652
—
D-149
—
per UL-510
product category:
OANZ2
File E230409
Flame Retardancy:
Pass
Key Attributes
Features
Thin DuPont™ Kapton
®
polyimide film
Advantages
Dimensionally stable at high temperatures
Flame retardant, chemical and radiation
resistant
High temperature performance helps reduce
adhesive transfer
Helps reduce adhesive transfer
Benefits
No rework – high productivity
Helps protect surfaces, helping reduce
replacement costs
Virtually no cleaning required –
helps increase productivity
Virtually no cleaning required –
helps increase productivity
Silicone adhesive
High adhesive to
film bond
Storage and Shelf Life
The shelf life of 3M™ Polyimide Film Tape 5413 is 36 months from the date of manufacture when stored in original
cartons at 21°C (70°F) and 50% relative humidity.
(2)
3M
™
Polyimide Film Tape 5413
Regulatory
For regulatory information about this product, contact your 3M representative.
Technical Information
The technical information, recommendations and other statements contained in this document are based upon tests
or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed.
Product Use
Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance
of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M
product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose
and suitable for user’s method of application.
Warranty, Limited Remedy, and Disclaimer
Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature,
3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product.
3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED
WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product
does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product
or refund of the purchase price.
Limitation of Liability
Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether
direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract,
negligence or strict liability.
Electronics Materials Solutions Division
3M Center, Building 225-3S-06
St. Paul, MN 55144-1000
1-800-251-8634 phone
651-778-4244 fax
www.3M.com/electronics
DuPont™ and Kapton
®
are trademarks
of E. I. du Pont de Nemours and
Company or its affiliates.
3M is a trademark of 3M Company.
Please recycle.
© 3M 2014. All rights reserved.
70-0703-2532-2
(3)
/201809303995746_pdf/pg_0001.png)
京公网安备 11010802033920号
EEWORLD/201809303995746_pdf/1.png)
/201809303995746_pdf/2.png)
/201809303995746_pdf/3.png)
/201809303995746_pdf/pg_0002.png)
/201809303995746_pdf/pg_0003.png)
