5-9495LE-1/2-3R datasheet, PDF

Datasheet> All Categories > accessories> 5-9495LE-1/2-3R

5-9495LE-1/2-3R: DescriptionTAPE DBL COATED CLR 1/2"X 3" 5PK; Categoryaccessories; File Size177KB，4 Pages; Manufacturer3M; Websitehttp://3M.com/esd; Environmental Compliance

Download Datasheet Parametric View All

5-9495LE-1/2-3R Overview

TAPE DBL COATED CLR 1/2"X 3" 5PK

5-9495LE-1/2-3R Parametric

Parameter Name	Attribute value
Tape type	Double coated, double sided
Adhesive	acrylic acid
base fabric, carrier	polyester
thickness	0.0067"（6.7 mils，0.170mm）
Thickness - Adhesive	0.0062"（6.2 mils，0.157mm）
Thickness - base fabric, carrier	0.0047"（4.7 mils，0.119mm）
width	0.50"（12.70mm）1/2"
length	3.00"（76.20mm）
color	transparent
use	glued
temperature range	-
Shelf life start date	Manufacturing date
shelf life	24 months

Preview

Download Datasheet

View All

Technical Data

November 2011

™

Double Coated Tapes 9474LE

•

9495LE

Product Description

3M™ Double Coated Tapes with 3M™ Laminating Adhesive 300LSE provides high bond strength to most surfaces, including

many low surface energy plastics such as polypropylene and powder coated paints. The acrylic adhesive also provides excellent

adhesion to surfaces contaminated lightly with oil typically used with machine parts.

Construction

Product

Number

3M™ Double

Coated Tape

9474LE

Faceside

Adhesive

Thickness

2.8 mil

(0.071mm)

Carrier

Type/

Thickness

Clear Polyester

0.5 mil

(0.013mm)

Backside

Adhesive

Thickness

3.4 mil

(0.086mm)

Liner

Color, Type,

Faceside Liner/

Tan, 58#

Polycoated Kraft,

no print

Backside Liner/

Tan, 58#

Polycoated Kraft,

“3M 300LSE”

Tan, 58#,

Polycoated Kraft

“3M 300LSE”

Liner

Caliper

4.2 mil

(0.11mm)/

4.2 mil

(0.11mm)

Total Tape

Thickness

(w/o liner)

6.7 mil

(0.17mm)

3M™ Double

Coated Tape

9495LE

2.8 mil

(0.071mm)

Clear Polyester

0.5 mil

(0.013mm)

3.4 mil

(0.086mm)

4.2 mil

(0.11mm)

6.7 mil

(0.17mm)

Note 1: Faceside (FS) adhesive is on the interior of the roll, exposed when unwound.

Note 2: Backside (BS) adhesive is on the exterior of the roll, exposed when liner is removed.

Note 3: The caliper listed is based on a calculation from manufacturing controlled adhesive coat weights using a density of 1.012 g/cc.

Features

• This tape has a film carrier which can add dimensional stability to foams and other substrates and also makes it easier to

handle the tape during slitting and die-cutting.

• 3M™ Double Coated Tape 9474LE features a dual liner for ease in selective die cutting.

• The bond strength of 3M™ Laminating Adhesive 300LSE increases as a function of time and temperature, and has very

high initial adhesion.

Application Ideas

• Foam to powder coated painted surfaces.

• Low surface energy plastic adhesion.

• Lens bonding applications.

™

Double Coated Tapes 9474LE

•

9495LE

Application Techniques

Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure and

moderate heat, from 100°F (38°C) to 130°F (54°C), will assist the adhesive in developing intimate contact with the

bonding surface.

To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Some typical surface cleaning

solvents are isopropyl alcohol or heptane.*

Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures

below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly

applied, low temperature holding is generally satisfactory.

*Note:

Carefully read and follow the manufacturer’s precautions and directions for use when working with solvents.

These cleaning recommendations may not be compliant with the rules of certain Air Quality Management

Districts in California; consult applicable rules before use.

Application Equipment

To apply adhesives in a wide web format, lamination equipment is required to ensure acceptable quality. To learn more

about working with pressure-sensitive adhesives please refer to technical bulletin,

Lamination Techniques for Converters of

Laminating Adhesives

(70-0704-1430-8).

For additional dispenser information, contact your local 3M sales representative, or the toll free 3M sales assistance number

at 1-800-251-8634.

Environmental Performance

Humidity Resistance:

High humidity has minimal effect on adhesive performance. No significant reduction in bond

strength is observed after exposure for seven days at 90°F (32°C) and 90% relative humidity.

UV Resistance:

When properly applied, nameplates and decorative trim parts are not adversely affected by exposure to

direct sunlight.

Water Resistance:

Immersion in water has no appreciable effect on the bond strength. After 100 hours at room

temperature, the high bond strength is maintained.

Temperature Cycling Resistance:

High bond strength is maintained after cycling four times through:

4 hours at 158°F (70°C)

4 hours at -20°F (-29°C)

4 hours at 73°F (22°C)

Chemical Resistance:

When properly applied, nameplate and decorative trim parts will hold securely after exposure to

numerous chemicals including oil, mild acids and alkalis.

Storage

Store in original cartons at 70°F (21°C) and 50% relative humidity.

Shelf Life

If stored under proper conditions, product retains its performance and properties for two years from date of manufacture.

(3)

™

Double Coated Tapes 9474LE

•

9495LE

Certification/Recognition

MSDS:

3M has not prepared a MSDS for this product which is not subject to the MSDS requirements of the Occupational

Safety and Health Administration’s Hazard Communication Standard, 29 C.F.R. 1910.1200(b)(6)(v). When used under

reasonable conditions or in accordance with the 3M directions for use, the product should not present a health and safety

hazard. However, use or processing of the product in a manner not in accordance with the directions for use may affect its

performance and present potential health and safety hazards.

TSCA:

This product is defined as an article under the Toxic Substances Control Act and therefore, it is exempt from

inventory listing requirements.

RoHs Complaint/REACH Compliant:

This product complies with the European Union’s “Restriction of Hazardous

Substances” (RoHs) initiative and with European REACH regulations 2002/95/EC and 2005/618/EC.

For Additional Information

To request additional product information or to arrange for sales assistance, call toll free 1-800-251-8634. Address

correspondence to: 3M, Electronics Markets Materials Division, 3M Center, Building 225-3S-06, St. Paul, MN 55144-

1000. Our fax number is 651-778-4244 or 1-877-369-2923. In Canada, phone: 1-800-364-3577. In Puerto Rico, phone:

1-787-750-3000. In Mexico, phone: 52-70-04-00.

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed

to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and

determine if it is suitable for your intended application. You assume all risks and liability associated with such use.

Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements

contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized

officer of 3M.

Warranty; Limited Remedy; Limited Liability.

This product will be free from defects in material and manufacture at the time of purchase.

3M MAKES NO OTHER

WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY

OR FITNESS FOR A PARTICULAR PURPOSE.

If this product is defective within the warranty period stated above,

your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M

product.

Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential

loss or damage arising from this 3M product, regardless of the legal theory asserted.

Electronics Markets Materials Division

3M Center, Building 225-3S-06

St. Paul, MN 55144-1000

1-800-251-8634 phone

651-778-4244 fax

www.3M.com/electronics

3M is a trademark of 3M Company.

Please recycle. Printed in U.S.A.

60-5002-0532-7

(4)

Recommended Resources

What causes batteries to explode? How to reduce the explosion accident rate?

Light-controlled bidirectional rotation motor drive circuit

10A regulated power supply circuit with overcurrent and overheating protection system

Low Ripple Power supply circuit

High speed logarithmic amplifier circuit

Detailed explanation of the meaning of LED fluorescent tube models T4, T5, T8, etc.: T4, T5, T8, T9, T10, etc., indicate the thickness of the lamp tube.　　Simply put: the value after T represents the circumference of the lamp tube, for example, the circumference of T4 is 4 cm, and the ...; 探路者 LED Zone

Summary of Common Encryption in MSP430: [color=#000][font=宋体][size=12px]1> Why do we need encryption and how do we encrypt it? [/size][/font][/color] [color=#000][font=宋体][size=12px]When your product is launched on the market, your competit...; qinkaiabc Microcontroller MCU

Developing arm under vc2005?: I used vc2005 to develop the arm version of TE2004, and it has been successfully running. But I don't know if I can insert arm assembly into vc2005 to improve the speed? Or do I have to use arm+linux ...; swaty ARM Technology

Driving WS2812 with only 2 wires: Only DIN and GND are used to drive WS2812. You need to make some changes to the light strip, connect a Schottky diode between DIN and VCC, and then connect a 10uF capacitor in parallel.From: https://g...; dcexpert MicroPython Open Source section

The 8019 network chip receives a data packet but does not generate an interrupt signal. What is the reason? I would like to ask the experts for help. Thank you.: The receiving LED indicator of 8019 flashes, indicating that the data packet has been received. However, I used an oscilloscope to check that 8019 did not generate an interrupt signal. I guess it is a...; ywjang Embedded System

Please help me analyze the circuit, I don't understand it.: [i=s] This post was last edited by fhlso on 2018-3-16 14:30 [/i]The input is positive and negative 5v 2000 Hz square wave...; fhlso Analog electronics

Shortcut: 00 01 02 03 04 05 06 07 08 09 0A 0C 0F 0J 0L 0M 0R 0S 0T 0Z 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 1H 1K 1M 1N 1P 1S 1T 1V 1X 1Z 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 2G 2K 2M 2N 2P 2Q 2R 2S 2T 2W 2Z 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 3G 3H 3J 3K 3L 3M 3N 3P 3R 3S 3T 3V 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4M 4N 4P 4S 4T 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5E 5G 5H 5K 5M 5N 5P 5S 5T 5V 60 61 62 63 64 65 66 67 68 69 6A 6C 6E 6F 6M 6N 6P 6R 6S 6T 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7M 7N 7P 7Q 7V 7W 7X 80 81 82 83 84 85 86 87 88 89 8A 8D 8E 8L 8N 8P 8S 8T 8W 8Y 8Z 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9F 9G 9H 9L 9S 9T 9W

Popular Components