3
Double Coated Tapes
with Adhesive 200MP
9492MP • 9495MP • 9495MPF • 9495FL • 9495B
Technical Data
August, 2008
Product Description
3M™ Double Coated Tapes with 3M™ Adhesive 200MP feature a thin polyester
film for dimensional stability and improved handling with ease of die-cutting and
laminating. The 3M adhesive 200MP provides exceptional temperature and
chemical resistance. 3M™ Double Coated Tape 9495B has a black polyester film
to provide opacity or visibility.
Constructions
Product
Number
3M™ Double
Coated Tape
9492MP
3M™ Double
Coated Tape
9495MP
3M™ Double
Coated Tape
9495MPF
3M™ Double
Coated Tape
9495FL
3M™ Double
Coated Tape
9495B
Faceside
1,4
Adhesive
Type/Thickness
200MP/
0.001"
(0.025mm)
200MP/
0.0029"
(0.074mm)
200MP/
0.0029"
(0.074mm)
200MP/
0.002"
(0.051mm)
200MP/
0.0029"
(0.074mm)
Carrier
Type/Thickness
Clear PET
3
0.0005"
(0.013mm)
Clear PET
0.0005"
(0.013mm)
Clear PET
0.0005"
(0.013mm)
Clear PET
0.001"
(0.025mm)
Black PET
0.0005"
(0.013mm)
Backside
2,4
Adhesive
Type/Thickness
200MP/
0.001"
(0.025mm)
200MP/
0.0023"
(0.058mm)
200MP/
0.0023"
(0.058mm)
200MP/
0.002"
(0.051mm)
200MP/
0.0023"
(0.058mm)
Liner Color,
Type, Print
Tan, 58#,
Polycoated Kraft,
“3M 200MP”
Tan, 58#,
Polycoated Kraft,
“3M 200MP”
Clear, PET,
No Print
liner –
Translucent, HDPE
Backside liner – Tan,
No Print
Tan, 58#,
Polycoated Kraft,
“3M 200MP”
5
Faceside
Liner
Caliper
0.004"
(0.10mm)
0.004"
(0.10mm)
0.002"
(0.051mm)
0.003"
(0.076mm)/
0.004"
(0.10mm)
0.004"
(0.010mm)
Total Tape
Thickness
(w/o liner)
0.0025"
(0.06mm)
0.0057"
(0.14mm)
0.0057"
(0.14mm)
0.0050"
(0.13mm)
0.0057"
(0.14mm)
Note 1: Faceside adhesive is on the interior of the roll, exposed when unwound.
Note 2: Backside adhesive is on the exterior of the roll, exposed when liner is removed.
Note 3: PET (Polyester).
Note 4: The caliper listed is based on a calculation from manufacturing controlled adhesive coat weights using a density of
1.012 g/cc. While past data pages have listed a nominal caliper of 4.8 mils for 3M tapes 9495MP, 9495FL and 9495B,
the coat weight has not changed.
Note 5: Backside liner is primary (stays with die cut part); Faceside is secondary (removed first).
3M
™
Double Coated Tapes with Adhesive 200MP
9492MP • 9495MP • 9495MPF • 9495FL • 9495B
Typical Physical
Properties and
Performance
Characteristics
Note: The following technical information and data should be considered representative or
typical only and should not be used for specification purposes.
Product Number
3M™ Double
Coated Tape
9492MP
Oz/in
(N/100 mm)
45 (49)
62 (67)
69 (75)
—
3M™ Double
Coated Tapes
9495MP, 9495MPF,
9495B, 9495FL
Oz/in
(N/100 mm)
70 (76)
82 (89)
92 (100)
100 (109)
Adhesion to stainless steel
ASTM D3330 - 90 degree
- 15 minute RT
- 72 Hour RT
- 72 Hour 158°F
ASTM D3330 - 180 degree, 2 mil al foil
- 72 Hour RT
Adhesion to other surfaces*
ASTM D3330 – 90 degree,
2 mil al foil, 72 hours RT
ABS
Acrylic
Polycarbonate
Shear Strength – ASTM D3654 modified -
(.5 inch
2
sample size)
1000 grams at 72°F
500 grams at 158°F
Relative High Temperature Operating
Ranges:
Long Term (days, weeks)
Short Term (minutes, hours)
48 (52)
55 (60)
37 (40)
62 (67)
60 (66)
60 (66)
>10,000 min
>10,000 min
>10,000 min
>10,000 min
250°F
300°F
250°F
300°F
*Not recommended for low energy plastics (polypropylene, polyethylene). For these surfaces, please
refer to 3M™ Adhesive 300, 300LSE, 350 and 300MP.
Available Sizes
Roll length, width, slitting tolerance, core size.
Available Lengths
(Subject to Minimum order requirements)
Maximum Length
1/4" to 1"
1" to 54"
Available Widths
Minimum
Maximum – 3M™ Double Coated Tapes 9492MP,
9495MP, 9495MPF, 9495B
3M™ Double Coated Tape 9495FL
Normal Slitting Tolerance
Core Size
1/4" (6.35 mm)
54" (1372 mm)
48" (1219 mm)
± 1/32" (0.8 mm)
3.0" (76.2 mm)
144 yd (132 m)
360 yd (329 m)
-2-
3M
™
Double Coated Tapes with Adhesive 200MP
9492MP • 9495MP • 9495MPF • 9495FL • 9495B
Features
• A thin polyester carrier in the products provides dimensional stability and improved
handling with ease of die-cutting and lamination compared to adhesive transfer tapes.
• 3M™ Adhesive 200MP provides exceptional temperature and chemical resistance and
withstands tough application environments.
• 3M™ Double Coated Tape 9495MPF has a film liner for ease in rotary die-cutting
and applications who demand low particle generating parts.
Application Techniques
Bond strength is dependent upon the amount of adhesive-to-surface contact developed.
Firm application pressure helps develop better adhesive contact and improves bond
strength.
To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified.
Some typical surface cleaning solvents are isopropyl alcohol or heptane.
*
Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape
application to surfaces at temperatures below 50°F (10°C) is not recommended because
the adhesive becomes too firm to adhere readily. However, once properly applied, low
temperature holding is generally satisfactory.
*Note:
Carefully read and follow the manufacturer’s precautions and directions for use
when working with solvents. These cleaning recommendations may not be in
compliance with the rules of certain air quality management districts in
California; consult applicable rules before use.
Application Ideas
•
•
•
•
•
•
Graphic overlays
Nameplates
Appliques
Decorative Trim
Thermal and sound damping applications in the electronics and appliance industry.
Gasket and lens attachment in mobile phones and pagers.
58# PCK
86# PCK
86# PCK
PET
Double-linered
HDPE (High density Polyethylene)
HDPE, PET
White PP (polypropylene), HDPE
PET
Liner Configuration
Guide
General purpose steel rule die-cutting
Steel rule cutting many nameplates on common sheet
Kiss cutting, steel rule
Rotary die-cutting
Selective die-cutting (cut adhesive before laminate)
Thermoforming
Part inspection
Embossed metal parts
Metal parts (punch press)
Adding Liners for
3M
™
Adhesive
200MP Double
Coated Film Tape
1. Rotary processing, tape only, on a densified (*outside of #4994) kraft liner. In this
process the tape waste will stay with the 58# PCK liner, leaving adhesive die-cuts
dispensable from the #4994 (densified kraft) liner.
2. Rotary processing for finished parts. It is most efficient to use the polyester linered
double coat (3M tape 9495MPF). Current process limitations prevent the supply of
the 3M adhesive 200MP on a DK liner.
-3-
3M
™
Double Coated Tapes with Adhesive 200MP
9492MP • 9495MP • 9495MPF • 9495FL • 9495B
Application Equipment
To apply adhesives in a wide web format, lamination equipment is required to
ensure acceptable quality. To learn more about working with pressure-sensitive
adhesives please refer to technical bulletin, Lamination Techniques for Converters
of Laminating Adhesives (70-0704-1430-8).
For additional dispenser information, contact your local 3M sales representative, or
the toll free 3M sales assistance number at 1-800-362-3550.
Storage
Store in original cartons at 70°F (21°C) and 50% relative humidity.
Shelf Life
If stored under proper conditions, product retains its performance and properties for
two years from date of manufacture.
Product Use
All statements, technical information and recommendations contained in this document are based upon
tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect
the use and performance of a 3M product in a particular application, including the conditions under
which the product is used and the time and environmental conditions in which the product is expected to
perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the
user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the
user’s method of application.
Warranty and
Limited Remedy
Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual
products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the
product. Individual products may have additional or different warranties as stated on product literature,
package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF
DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product
is fit for a particular purpose and suitable for user’s application. If the 3M product is defective within the
warranty period, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to
replace the product or refund the purchase price.
Limitation of Liability
Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the
3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory
asserted, including warranty, contract, negligence or strict liability.
ISO 9001: 2000
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001: 2000 standards.
3
Industrial Adhesives and Tapes Division
Converters Markets
3M Center, Building 21-1W-10, 900 Bush Avenue
St. Paul, MN 55144-1000
800-223-7427 • 651-778-4244 (fax)
www.3M.com/converter
Recycled Paper
40% pre-consumer
10% post-consumer
3M is a trademark of 3M Company.
Printed in U.S.A.
©3M 2008 70-0709-3792-8 (8/08)
-4-
Embedded System
京公网安备 11010802033920号
EEWORLD
