My understanding is that the ADCIntStatus() function is used to determine whether the sampling is completed, and the interrupt status of this function is configured by ADCSequenceStepConfigure().
The ...
1. Two types of collisions in RFID systems
Multi-tag collision (*)Multiple tags are in the field of the reader. When two or more tags send data at the same time, communication conflicts and data inter...
The following code implements the two LEDs of the MSP430G2553 microcontroller to flash alternately#include msp430.h/*** main.c*/int main(void){WDTCTL = WDTPW | WDTHOLD; // stop watchdog timerP1DIR|=BI...
Figure 1Figure 2Figure 1 is a BUCK circuit, connected to a 500 ohm load, AI4, AI5 are the return detection signals, AI4, AI5 are divided and passed through the operational amplifier, and the value aft...
I finally rewrote the driver of ov7221 and successfully captured the image, but the image is not very clear. I don't know if it is related to the 30W pixel.
The key problem is that the camera has a ve...
This is my first time drawing a PCB. When I tested it, I found a strange problem. If the input PWM signal is 5kHz, there is no problem. But if it is higher, 15kHz, it is always at a low level. No matt...
introduction
With the continuous optimization of surface mount technology (SMT) and the rapid development of chip component manufacturing technology, the application of chip mounters in the el...[Details]
1. Introduction
Automobile pollution is one of the most important issues that people are most concerned about and need to solve urgently. As an important method for detecting automobile exhau...[Details]
In recent years, the market for mobile/portable devices such as smartphones and laptops has continued to grow rapidly. While these products continue to integrate more new features to enhance the ...[Details]
Due to the significant increase in electronic devices in automotive and industrial applications, the automotive and industrial markets continue to play an important role in China's electronics in...[Details]
1. Introduction
Light control circuit plays a vital role in urban street lamps or corridor lighting. With light control circuit, the lights can be automatically turned on and off according to ...[Details]
The automotive lighting and signal control system is responsible for controlling the vehicle's lighting, signal lights, electric horns, reversing and brake buzzers. Traditional automotive lighting...[Details]
The typical fault troubleshooting listed below is for reference of maintenance personnel.
When the computer is turned on, the indicator light is off and there is no screen display
Mainte...[Details]
In recent years, with the rapid development of the information industry, dot matrix LED display screens have been widely used in various advertising and information display systems such as the fina...[Details]
As a simple and practical input device, buttons have been used in various microcontroller application systems and are ubiquitous. However, the buttons used in different practical occasions are also...[Details]
With concerns about the growing energy crisis, motor efficiency has become an important and timely topic. This is because motors use 63% to 70% of the electricity produced in the United States and ...[Details]
Today, the value of electronic components in cars accounts for 15-20% of the total vehicle. In the future, this proportion may be as high as 30-40% as more safety electronics, fuel consumption and ...[Details]
With the continuous advancement of various technologies in the field of measurement and control, the baseband subsystem of general measurement and control equipment has entered the fourth generation o...[Details]
Abstract: Based on the ZigBee parking lot SMS car search system, the location of the vehicle in the parking lot is sent to the owner through SMS, which is convenient for the owner to quickly find ...[Details]
introduction
At present, the research on micron and nanotechnology is very active, which has led to the rapid development of microtechnology and micro-mechanical electronic system (MEMS) t...[Details]
Leakage current is generated by parasitic resistance paths between the measurement circuit and a nearby voltage source. This current can significantly reduce the accuracy of low current measurement...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
