Technical Data
August, 2010
3M
™
Trizact
™
Lapping Film Aluminum Oxide 269XA
Product Description
A microreplicated abrasive film product using tightly
graded aluminum oxide minerals coated onto a polyester
film backing. Available with PSA (Pressure Sensitive
Adhesive).
Converted Forms
Sheets, Discs and Rolls.
Maximum width 25".
Backing
Polyester Film
Applications
• Flat lapping
• Cullet removal
• Glass, metal, plastic processing and repair
Nominal thickness: 3 mil.
Mineral Size Grading Chart
Micron Grade
(nominal)
Color
Orange
Blue
Pink
Green
Key Features
– Long life
– Produces excellent surface finish
– Consistent cut rates
– Reduces overall process time
– Produces high yields
– Non-slurry processing
5
10
20
35
Storage and Shelf Life
Recommended Storage Conditions:
Product I.D.
Product ID
(plain back)
50-90°F at 30-70% relative humidity.
Product ID
(with PSA backing)
Backing
3 mil
It is recommended that product be used within 24 months
of purchase.
269XA
269XA
3
3M
™
Trizact
™
Lapping Film Aluminum Oxide 269XA
Certification/Recognition
MSDS:
3M has prepared an MSDS for this product,
although it is not subject to the MSDS requirements of the
Occupational Safety and Health Administration’s Hazard
Communication Standard, 29 C.F.R. 1910.1200(b)(6)(v).
When used under reasonable conditions or in accordance
with the 3M directions for use, the product should not
present a health and safety hazard. However, use or
processing of the product in a manner not in accordance
with the directions for use may affect its performance and
present potential health and safety hazards.
TSCA:
This product is defined as an article under the
Toxic Substances Control Act and therefore, it is exempt
from inventory listing requirements.
RoHs Complaint/REACH Compliant:
This product
complies with the European Union’s “Restriction of
Hazardous Substances” (RoHs) initiative and with
European REACH regulations 2002/95/EC and
2005/618/EC.
Important Notice
All statements, technical information, and recommendations
related to 3M’s products are based on information believed
to be reliable, but the accuracy or completeness is not
guaranteed. Before using this product, you must evaluate it
and determine if it is suitable for your intended application.
You assume all risks and liability associated with such use.
Any statements related to the product which are not
contained in 3M’s current publications, or any contrary
statements contained on your purchase order shall have no
force or effect unless expressly agreed upon, in writing, by
an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and
manufacture at the time of purchase.
3M MAKES NO
OTHER WARRANTIES INCLUDING, BUT NOT
LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.
If this product is defective
within the warranty period stated above, your exclusive
remedy shall be, at 3M’s option, to replace or repair the
3M product or refund the purchase price of the 3M
product.
Except where prohibited by law, 3M will not
be liable for any indirect, special, incidental or
consequential loss or damage arising from this 3M
product, regardless of the legal theory asserted.
For Additional Information
To request additional product information or to arrange
for sales assistance, call toll free 1-866-599-4227.
Address correspondence to: 3M, Electronics Markets
Materials Division, 3M Center, Building 225-3S-06,
St. Paul, MN 55144-1000.
Our fax number is 651-778-4244 or 1-877-369-2923.
In Canada, phone: 1-800-364-3577.
In Puerto Rico, phone: 1-787-750-3000.
In Mexico, phone: 52-70-04-00.
3
Electronics Markets Materials Division
3M Center, Building 225-3S-06
St. Paul, MN 55144-1000
1-866-599-4227 phone
651-778-4244 fax
www.3M.com/electronics
3M and Trizact are trademarks
of 3M Company.
Please recycle. Printed in U.S.A.
© 3M 2010. All rights reserved.
60-5002-0468-4
3
京公网安备 11010802033920号
EEWORLD
