Moisture Barrier Bag Dri-Shield
®
2000
This aluminized moisture barrier bag is designed to provide packaging for ESD
and moisture sensitive items, both inside and outside an ESD protected area.
The bags are heat sealable and suitable for vacuum packaging. Bags are
printed with ESD and moisture warning symbols and a lot code for traceability.
SCS Moisture Barrier Bags Dri-Shield
®
2000 are manufactured from a
laminate of multiple layers of aluminized polyester and polyethylene. Polyester
provides puncture resistance. Metal layers are intended to provide shielding of
Electrostatic Discharge (ESD) and to help minimize the penetration of electric
field while providing moisture protection.
Open Top Bag
ZipTop Bag
Made in the
United States of America
Meets ANSI/ESD S20.20, Packaging standard ANSI/ESD S541, and Static Control Bag
ANSI/ESD S11.4 Level 3 (except Transparency)
Physical
Moisture Vapor
Transmission Rate
(MVTR)
Typical Value
Testing Method
<0.035 grams/100 sq. in./24 hrs MIL-STD-3010C Method 3030
Tensile Strength
Puncture Resistance
Seal Strength
Thickness
Marking Adhesion
Electrical
ESD Shielding
7800 PSI, 54 MPa
20 lbs, 89 N
15 lbs, 66 N
3.6 mils, 0.0914 mm
±
10%
Pass
Typical Value
<10 nJ
1 x 10
4
to < 1 x 10
11
ohms
1 x 10
4
to < 1 x 10
11
ohms
45 dB
Typical Value
Not Detected
Typical Value
300°F - 400°F, 140°C - 204°C
0.6 – 4.5 seconds
30 – 70 PSI, 206 – 482 KPa
ASTM D882
MIL-STD-3010 Method 2065
ASTM D882
MIL-STD-3010 Method 1003
IPC-TM-650 2.4.1
Testing Method
ANSI/ESD STM11.31
Tolerance: Width -0, +1/4"
Length ± 1/8" Offset 0 to 1/4"
Seal width 3/8" with a tolerance of ± 1/8"
Surface Resistance -
Interior
Surface Resistance -
Exterior
EMI Attenuation
Cleanliness
Silicone
Heat Sealing Conditions
Temperature
ANSI/ESD STM11.11
ANSI/ESD STM11.11
1 to 10 GHz
Testing Method
FTIR
Note: Standard bag markings shown
above are not to scale.
Tolerance (inches): Width -0, +0.250 Length +/- 0.125 Offset O to 0.250
Seal width +/- 0.125
Time
Pressure
Bag is free of amines, silicones and heavy metals.
This product is intended for commercial use only. This product is not on the Qualified Product
Listing under the Defense Standardization Program.
NOTE:
The complete dry package concept of packaging for electronics requires three elements:
SCS Moisture Barrier Bags are packaged in a polyethylene bag.
RoHS 3, REACH, and Conflict Minerals Statement
None of the RoHS 3 restricted materials or REACH substances of very high concern as
of 2017/07/07, or Conflict Minerals are intentionally added in manufacturing this product.
Ref: European Union Directive 2011/65/EU and Regulation (EC) No. 1907/2006/CE.
See
SCS Warranty, Limitation of Liability and Remedies
Moisture Barrier Bags
- To Protect
Desiccants
- To Absorb Moisture
Humidity Indicator Cards
- To Monitor Performance
Specifications and procedures subject to change without notice.
DRI-SHIELD
®
2000 MOISTURE BARRIER BAG
926 JR Industrial Drive, Sanford, NC 27332
WEB SITE:
StaticControl.com
PHONE (919) 718-0000
DRAWING
NUMBER
Dri-Shield
®
2000
DATE
October
2017
© 2017 DESCO INDUSTRIES INC.
Employee Owned
DSP and ARM Processors
京公网安备 11010802033920号
EEWORLD
