EEWORLDEEWORLDEEWORLD

Part Number

Search

M39003/03-3065H

Description
CAP TANT 8.2UF 10% 35V AXIAL
CategoryPassive components   
File Size90KB,6 Pages
ManufacturerVishay
Websitehttp://www.vishay.com
Download Datasheet Parametric Compare View All

M39003/03-3065H Overview

CAP TANT 8.2UF 10% 35V AXIAL

M39003/03-3065H Parametric

Parameter NameAttribute value
capacitance8.2µF
Tolerance±10%
Voltage - Rated35V
typeseal
ESR (equivalent series resistance)-
Operating temperature-55°C ~ 125°C
Service life at different temperatures-
Installation typeThrough hole
Package/casingAxial
size/dimensions0.185" diameter x 0.474" length (4.70mm x 12.04mm)
Height - Installation (maximum)-
lead spacing-
Manufacturer size codeB
characteristicmilitary
failure rateC(0.01%)
notifyQPL or military specifications are for reference only. Non-military parts. See terms and conditions.
M39003/03
www.vishay.com
Vishay Sprague
Solid-Electrolyte T
ANTALEX
™ Capacitors,
Military MIL-PRF-39003/03 Qualified, Style CSR23
FEATURES
• Hermetically sealed
• Metal cased
• Axial lead
• Weibull failure rates B, C, D
• Exponential failure rates M, P, R, S
• Tape and reel available per EIA-296 standard
PERFORMANCE CHARACTERISTICS
Operating Temperature:
-55 °C to +125 °C
(above 85 °C, voltage derating is required)
Capacitance Range:
1.2 μF to 1000 μF
Capacitance Tolerance:
± 5 %, ± 10 %, ± 20 %
Voltage Rating:
6 V
DC
to 50 V
DC
STYLE, MILITARY SPECIFICATION SHEET
Style CSR23, M39003/03
MIL-PRF-39003/3
DESCRIPTION
Solid-electrolyte
T
ANTALEX
capacitors
to
military
specification MIL-PRF-39003 - Exponential and Weibull
Distribution: hermetically sealed, metal cased, axial leaded
tubular capacitors manufactured as military style CSR23.
These capacitors are furnished to the requirements of the
military specification, including marking, testing and
inspection.
In accordance with the specification, all capacitors are
marked with the military part number (M39003/xx-xxxx)
rather than the older style designation (CSRxxxxxxxx) and
should be ordered as such. All capacitors covered by
MIL-PRF-39003 are now ordered with the military part
number as illustrated in the Part Numbering System chart.
Capacitors must not be ordered using the style number
identification.
MIL-PRF-39003 establishes failure rates (expressed in
percent per 1000 h) based on exponential and Weibull
distribution. Care must be exercised in ordering to insure the
part number correctly identifies the desired failure rate level.
In addition, each order for military style CSR13, CSR21,
CSR23 capacitors requiring government inspection must
state whether inspection is to be at the destination or at the
Vishay Sprague plant. Orders requiring source inspection
cannot be shipped until this has been accomplished.
Style CS13 capacitors previously shown in MIL-C-26655 are
directly replaced by style CSR13 and style CSR23
capacitors are extended capacitance range versions of
military style CSR13.
For information on the performance characteristics of these
capacitors, please refer to the latest issue of the military
specification.
ORDERING INFORMATION
M39003
BASIC
DOCUMENT NUMBER
Indicates the Basic
Specification; in this
case MIL-PRF-39003
/03
SLASH SHEET
Indicates the
Specification Sheet
of the Basic Military
Specification
-2046
DASH NUMBER
Taken from Ratings
table of the
Specification Sheet
A
SURGE CURRENT
OPTION LETTER
Blank = standard
(no surge current)
A = +25 °C,
after Weibull
B = -55 °C and +85 °C,
after Weibull
C = -55 °C and +85 °C,
before Weibull
D = +25 °C, after Weibull,
high temperature solder
E = -55 °C and +85 °C,
after Weibull, high
temperature solder
F = -55 °C and +85 °C,
before Weibull, high
temperature solder
H = high temperature
solder only (no surge)
/TR
PACKAGING OPTION
(1)
Blank = bulk
/TR = tape and reel
/HR = tape and reel, half reel
/PR = tape and reel, partial reel
/RR = tape and reel, option R
/WR = tape and reel, option W
Note
(1)
See detailed packaging information following the Standard Ratings table.
Revision: 16-Nov-17
Document Number: 40157
1
For technical questions, contact:
tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000

M39003/03-3065H Related Products

M39003/03-3065H M39003/03-0287 M39003/03-0287H M39003/03-0287/HSD M39003/03-3012/TR M39003/03-3015/TR
Description CAP TANT 8.2UF 10% 35V AXIAL CAP TANT 39UF 10% 50V AXIAL CAP TANT 39UF 10% 50V AXIAL CAP TANT 39UF 10% 50V AXIAL CAP TANT 680UF 20% 6V AXIAL CAP TANT 1000UF 20% 6V AXIAL
capacitance 8.2µF 39 µF 39µF 39µF 680µF 1000µF
Tolerance ±10% - ±10% ±10% ±20% ±20%
Voltage - Rated 35V - 50V 50V 6V 6V
type seal - seal seal seal seal
Operating temperature -55°C ~ 125°C - -55°C ~ 125°C -55°C ~ 125°C -55°C ~ 125°C -55°C ~ 125°C
Installation type Through hole - Through hole Through hole Through hole Through hole
Package/casing Axial - Axial Axial Axial Axial
size/dimensions 0.185" diameter x 0.474" length (4.70mm x 12.04mm) - 0.351" diameter x 0.786" length (8.92mm x 19.96mm) 0.351" diameter x 0.786" length (8.92mm x 19.96mm) 0.351" diameter x 0.786" length (8.92mm x 19.96mm) 0.351" diameter x 0.786" length (8.92mm x 19.96mm)
Manufacturer size code B - D D D D
characteristic military - military military military military
failure rate C(0.01%) - P(0.1%) P(0.1%) C(0.01%) C(0.01%)
notify QPL or military specifications are for reference only. Non-military parts. See terms and conditions. - QPL or military specifications are for reference only. Non-military parts. See terms and conditions. QPL or military specifications are for reference only. Non-military parts. See terms and conditions. QPL or military specifications are for reference only. Non-military parts. See terms and conditions. QPL or military specifications are for reference only. Non-military parts. See terms and conditions.
In MSP430 MCU, when only one port AD4 is used, why can't I jump to the interrupt? Every time the interrupt flag is displayed
#includestatic unsigned int ADCResult; //Function function void Coulometry() { P6SEL |= BIT4 ; // Only Enable A/D channel A4 ADC12CTL0 = ~ENC ; // Enable conversions ADC12CTL0 = ADC12ON + SHT0_8 + MSC...
zbk81023 Embedded System
Sample application progress
The sample application process has already passed for half a day, I wonder how far everyone has come! I have applied for 8 samples, and I am still short of one op amp!...
蓝雨夜 ADI Reference Circuit
About serial communication (RS485)
I now have a slave board. If the slave board cannot receive data from the host within 3S, the baud rate will be switched from the default 9600 to 38400. If it still cannot receive data after another 3...
笨笨丁2018 Microcontroller MCU
Newbie asks: Data type and function issues when porting from VC to EVC
Hello everyone: I am a student who has just started working. The task I got is to port a library written in VC6.0 to EVC. The method I used was to paste the VC code into EVC and then find the error in...
sonic Embedded System
Why does asynchronous FIFO use Gray code?
The first thing to understand is that the only purpose of using Gray code in asynchronous FIFO is to "correctly determine the empty or full state even when sampling the read and write pointers in a me...
eeleader FPGA/CPLD
Shaanxi Province TI Electronic Competition Component List
2012 "TI Cup" Undergraduate Electronic Design Competition Basic instruments, main components and components provided by TI In addition to the laboratory instruments and components, this electronic des...
wow1919 TI Technology Forum

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 448  1830  1517  1615  2828  10  37  31  33  57 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号