ETD-BL-1T-ON-CC- 10S
Timer relay with switch-on delay (with control
contact) and adjustable time
Data sheet
103616_en_03
1
Description
© PHOENIX CONTACT - 2013-09-16
Features
–
–
–
–
–
–
6.2 mm narrow housing
With switch-on delay (with control contact)
Adjustable time
Easy and accurate time setting
Supply voltage 24 V DC
Output: A floating PDT
Compact timer relay in 6.2 mm housing for controlling time
sequences.
The time is set on the front of the device using a labeled
thumbwheel, which is recessed to protect against accidental
modification. A screwdriver is used to change the settings
(blade width 2.5 mm).
The compact timer relays are available with different time
ranges as well as with a screw, spring-cage, and push-in
connection.
WARNING: Correct usage in potentially explosive areas
The module is a category 3 item of electrical equipment. Follow the instructions provided here during
installation and observe the safety instructions.
Never carry out work when voltage is present.
Make sure you always use the latest documentation.
It can be downloaded from the product at phoenixcontact.net/products.
This data sheet is valid for all products listed on the following page:
ETD-BL-1T-ON-CC- 10S
2
Ordering data
Type
ETD-BL-1T-ON-CC- 10S
ETD-BL-1T-ON-CC-300S
ETD-BL-1T-ON-CC- 30MIN
ETD-BL-1T-ON-CC-300MIN
Description
Timer relay with screw connection
Time range 0.1...10 s
Time range 3...300 s
Time range 0.3...30 min
Time range 3...300 min
Timer relay with spring-cage connection
Time range 0.1...10 s
Time range 3...300 s
Time range 0.3...30 min
Time range 3...300 min
Timer relay with Push-in connection
Time range 0.1...10 s
Time range 3...300 s
Time range 0.3...30 min
Time range 3...300 min
Order No.
2917418
2917421
2917434
2917447
Pcs. / Pkt.
1
1
1
1
ETD-BL-1T-ON-CC- 10S-SP
ETD-BL-1T-ON-CC-300S-SP
ETD-BL-1T-ON-CC- 30MIN-SP
ETD-BL-1T-ON-CC-300MIN-SP
2917573
2917586
2917599
2917609
1
1
1
1
ETD-BL-1T-ON-CC- 10S-PT
ETD-BL-1T-ON-CC-300S-PT
ETD-BL-1T-ON-CC- 30MIN-PT
ETD-BL-1T-ON-CC-300MIN-PT
2901480
2901481
2901483
2901484
1
1
1
1
3
Technical data
Input data
Input voltage range
Time setting range
ETD-BL-1T-ON-CC- 10S
ETD-BL-1T-ON-CC-300S
ETD-BL-1T-ON-CC- 30MIN
ETD-BL-1T-ON-CC-300MIN
ETD-BL-1T-ON-CC- 10S-SP
ETD-BL-1T-ON-CC-300S-SP
ETD-BL-1T-ON-CC- 30MIN-SP
ETD-BL-1T-ON-CC-300MIN-SP
ETD-BL-1T-ON-CC- 10S-PT
ETD-BL-1T-ON-CC-300S-PT
ETD-BL-1T-ON-CC- 30MIN-PT
ETD-BL-1T-ON-CC-300MIN-PT
Function
Setting accuracy
Repeat accuracy
Nominal current typ.
24 V DC (19,2 V DC ...30 V DC)
0.1 s ... 10 s
3 s ... 300 s
0.3 min ... 30 min
3 min ... 300 min
0.1 s ... 10 s
0.3 s ... 300 s
0.3 min ... 30 min
3 min ... 300 min
0.1 s ... 10 s
3 s ... 300 s
0.3 min ... 30 min
3 min ... 300 min
ON-CC: With switch-on delay with control contact
≤
2.5 % (of scale end value)
≤
0.5 % (From the measuring range final value)
15 mA (Relay ON)
7 mA (Relay OFF)
Output data
Contact type
Output fuse
Switching capacity
1 floating PDT
6.3 A (fast-blow)
1500 VA (6 A / 250 V AC)
Control contact
Control contact
Control pulse length
Non-floating, terminals A1-B1
min. 50 ms
103616_en_03
PHOENIX CONTACT
2
ETD-BL-1T-ON-CC- 10S
General data
Mechanical service life
Service life, electrical
Operating mode
Degree of protection
Pollution degree
Surge voltage category
Rated insulation voltage
Impulse withstand voltage
Inflammability class according to UL 94
Mounting
Mounting position
Width
Height
Depth
Type of housing
Color
Approx. 2 x 10
7
cycles
Approx. 2 x 10
5
cycles at ohmic load, 1000 VA
100% operating factor
IP20
2 (according to EN 50178)
III, safe isolation (according to EN 50178)
300 V AC (According to EN 50178)
6 kV (According to EN 50178)
V0
on standard DIN rail NS 35 in accordance with EN 60715
Any
6.2 mm
80 mm
86 mm
Polyamide PA, self-extinguishing
green
Connection data Screw connection
Conductor cross section, solid
Conductor cross section, stranded
AWG
Stripping length
Tightening torque
0.14 mm² ... 2.5 mm²
0.14 mm² ... 2.5 mm²
30 ... 12
8 mm
0.6 Nm ... 0.8 Nm / 5 lb in ... 7 lb in
Connection data Spring-cage conn.
Conductor cross section, solid
Conductor cross section, stranded
AWG
Stripping length
0.14 mm² ... 2.5 mm²
0.14 mm² ... 2.5 mm²
26 ... 12
8 mm
Connection data Push-in conn.
Conductor cross section, solid
Conductor cross section, stranded
AWG
Stripping length
0.14 mm² ... 2.5 mm²
0.14 mm² ... 2.5 mm²
26 ... 14
8 mm
Ambient conditions
Ambient temperature (operation)
Ambient temperature (storage/transport)
Permissible humidity (operation)
-20 °C ... 65 °C
-25 °C ... 80 °C
15 % ... 85 %
Conformance / approvals
Conformance
ATEX
UL, USA / Canada
GL (not for ETD-BL-...-PT)
CE-compliant
X
II 3 G Ex nA nC IIC T4 Gc X
UL/C-UL listed UL 508
GL EMC 1 C
103616_en_03
PHOENIX CONTACT
3
ETD-BL-1T-ON-CC- 10S
Conformance with EMC Directive 2004/108/EC
Noise immunity
When being exposed to interference, there may be minimal deviations.
Noise emission
EN 61000-6-2
EN 61000-6-4
Conformance with LV directive 2006/95/EC
Electronic equipm. for electrical power installations according to
EN 50178
4
Block diagram
B1
A1 +
t
A2 –
U = 24 V DC
11
12
14
103616_en_03
PHOENIX CONTACT
4
ETD-BL-1T-ON-CC- 10S
5
Safety regulations and installation notes
WARNING: Risk of electric shock
Never carry out work when voltage is present.
Installation notes
The category 3 device is suitable for installation in the zone 2 potentially explosive area. It fulfills the
requirements of EN 60079-0:2009 and EN 60079-15:2010.
NOTE:
Installation, operation and maintenance may be carried out only by qualified electricians. Follow the
specified installation instructions. When installing and operating the device, the applicable safety directives
(including national safety directives), accident prevention regulations, as well as general technical regulations,
must be observed. The technical data should be taken from this data sheet and the certificates (conformity
assessment, other possible approvals).
NOTE:
Do not open the device or make changes to it. Do not repair the device yourself, replace it with an
equivalent device. Repairs may only be carried out by the manufacturer. The manufacturer is not liable for any
damage due to violation of the described regulations.
NOTE:
The IP20 degree of protection (IEC 60529/EN 60529) of the device is intended for a clean and dry
environment. Do not subject the device to any load that exceeds the described limits.
WARNING: Explosion hazard
The device has not been designed for use in potentially dust-explosive atmospheres.
Installation in Ex area (zone 2)
NOTE:
Please observe the requirements defined for use in potentially explosive atmospheres!
WARNING: Explosion hazard
The device should be installed in a housing (control or distributor box) that fulfills the requirements of
EN 60079-15 and at least IP54 (EN 60529) degree of protection.
WARNING: Explosion hazard
When installing and connecting the supply and signal circuits observe the requirements of EN 60079-14. Only
devices suitable for operation in Ex zone 2 and the conditions at the application site may be connected to the
circuits in zone 2.
WARNING: Explosion hazard
Cables may be connected and disconnected in potentially explosive areas only when power is disconnected.
WARNING: Explosion hazard
The device must be stopped and immediately removed from the Ex area if it is damaged or was subject to an
impermissible load or stored incorrectly or if it malfunctions.
You can download the latest documents at www.phoenixcontact.net/products.
103616_en_03
PHOENIX CONTACT
5
京公网安备 11010802033920号
EEWORLD
