Specifications for "N" Connectors
_____________________________
N Series connectors are medium sized, and weatherproof. The coupling method utilizes a screw system designed for use at
frequencies up to microwave. These connectors are particularly useful where precision performance is necessary such as in
test equipment, satellite communications, MATV, computer LAN systems, and other high-tech electronic equipment.
Because of the quality manufacturing tolerances these connectors ensure excellent performance throughout 0-18GHz.
MATERIALS
Connector Parts
Connector Body and Parts
Male Contact Pin
Outer Contact
Socket Contact
Crimp Ferrule
Insulators, Standard Versions
Rubber Gaskets
Plating
Material
Brass
Brass
Brass
Beryllium Copper
Bronze
Annealed Copper
Teflon Delrin
Silicone Rubber
Nickel (Silver Optional)
Phosphor
Equivalent Standard †
ISOCuZn38Pb2 Body Part
QQ-B-626
QQ-B-750
QQ-C-530/MIL-H-7199
CuBe2
QQ-C-576
L-P403/BS4271
ASTM-E1418PSI
MIL-G-45204
Grade B
ELECTRICAL
Requirement
Impedance
Frequency Range
VSWR
RF Insertion Loss
RF Leakage
Test Voltage (At Sea Level)
Working Voltage (At Sea level)
Insulation Resistance
Contact Resistance
Performance
50
75
0-18 GHz 0-1 GHz
1.30 Max.
0.2 db Max. at 3 GHz
-90 db Min. at 2-3 GHz
2500V rms
1000V rms
5000 Megohm Min.
3 Megohm Max.
Test †
Specification
-----
-----
MIL- C-39012
MIL- C-39012
MIL- C-39012
MIL-STD-202
MIL-STD-202
MIL-STD-202
MIL-C-39012
MECHANICAL & ENVIRONMENTAL
Requirement
Durability
Shock
Vibration
Cable Retention (Cable Types)
Coupling Nut
Temperature Range
Moisture Resistance
Salt Spray
Performance
500 Insertions & Extractions Min.
100 G
20 G from 80-2000 Hz
60 lbs. Minimum Pull Test
100 lbs. Maximum
Teflon: -55 to +199 C
+85 C
Continuous Test
48 Hours
MIL-STD-202
MIL-STD-202
Delrin: -40 to
MIL-C-39012
MIL-STD-202
MIL-STD-202
MIL-C-39012
MIL-C-39012
----------
Test †
Specification
s
†Products are made to conform to the Mil standard but are for commercial applications and not QPL
_____________________________
FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111
Back to Index
18
s
- Page 19 -
o
"N" Connectors
____________________________
Cable Plugs
“N” cable plugs are available in solder/clamp, solder/crimp, and twist-on versions to satisfy the installer’s preference.
Standard cable sizes are facilitated with these connectors for applications from satellite TV to Ethernet LAN installations.
cmpliant
Part Number
Description
RG/U Cable
Fig.
No.
110A108A
110A108B
110A108F
110A108G
110A205A
110A205B
110A205F
110A205G
110A404B2
110A404B3
Solder/Clamp Plug
Solder/Clamp Plug
Solder/Clamp Plug
Solder/Clamp Plug
Solder/Crimp Plug
Solder/Crimp Plug
Solder/Crimp Plug
Solder/Crimp Plug
Twist-On Plug
Twist-On Plug
6A
8, 213
58
59, 62
6A
8, 213
58
59, 62
Thick-Net
Thick-Net Plenum
88
88
88
88
89
89
89
89
90
90
Fig. 89
Fig. 88
Fig. 90
RoHS compliant
REQUEST QUOTE
REQUEST DRAWING
Jacks
Two cable jacks and one panel jack style are available as standard items. Other types are available as special order items.
The cable jacks utilize the clamp/solder method of assembly and the panel jack will facilitate any cable size by soldering
the center conductor to the connector’s solder-cup contact.
Part
Number
120A108B
120A108F
120A108G
127A577
Fig. 91
Fig. 92
RoHS compliant
REQUEST QUOTE
REQUEST DRAWING
Description
Cable Jack, Solder Clamp
Cable Jack, Solder Clamp
Cable Jack, Solder Clamp
Panel Jack, Solder Cup
RG/U
Cable
8A, 11
58, 58A, 58B
59, 62
Any
Fig.
No.
91
91
91
92
V-Bite ® PC Edge Mount
The V-Bite ® is an industry award winning design PCB connector with all the advantages a designer could want. It edge
mounts to the board which offers the lowest profile and utilizes very little PCB real estate. It lends itself to surface mount
and through-hole soldering techniques. There are versions for IR and convection reflow soldering. Because the connector
locks into place both above and below the PCB it disperses rotational torque relief to the board and not the solder points.
The V-Bite ® design offers the lowest VSWR ratings due to the straight through-put contact design. No right angles for
reflection. Available in 50 and 75 ohm, threaded and non-threaded. Other options for PCB thickness available. Other
interfaces available. See “F”, BNC Twin, TNC and N sections.
Part
Number
161V504E
161V504EFT
162V504E
RoHS compliant
Description
N type Edge Mount Jack (TFE Insul for reflow)
N type Edge Mount Jack w/ Flange and Threads (TFE Insul
for reflow)
N Type Edge Mount Plug (TFE Insul for reflow)
REQUEST QUOTE
REQUEST DRAWING
Fig.
No.
98
99
100
Fig. 98
Fig. 99
Fig. 100
Adapters & Terminator
Standard configurations of adapters are machined brass with attractive nickel plating. All contacts are gold plated brass
(males) and phosphor bronze (females).
Part
Number
132A505
143A505
145A505
151A505
130A5011
132A5011
TC1028
RoHS compliant
REQUEST QUOTE
Description
Female/Female Inline
F/M/F “T” Adapter
F/F/F “T” Adapter
F/M Right Angle Adapter
Fig.
No.
97A
93
94
95
Male/Male Inline (Tri-Plate) 97B
Female/Female (Tri-Plate)
50W Female
REQUEST DRAWING
97C
96
Fig. 95
Fig. 93
s
Fig. 97A
Fig. 97B
Fig. 97C
Fig. 94
Fig. 96
s
N to 7/16 Adapter Kit
7/16 Adapter Kit ADPT3PA
is a 8 piece kit containing 7/16 to N, N to N and 7/16 to 7/16 adapters. Made of
machined brass and Tri-Plated bodies. Gold plated contacts.
Kits are in zippered leather cases.
Part
Number
ADPT3PA
Description
N to 7/16 Adapter Kit (Tri-
Plate)
Fig.
No.
102
REQUEST QUOTE
_____________________________
FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111
s
- Page 20 -
Back to Index
19
京公网安备 11010802033920号
EEWORLD
