TC1303B-FF1EMF datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Power/power management> The power supply circuit> TC1303B-FF1EMF

TC1303B-FF1EMF: Description0.5 A SWITCHING REGULATOR, 2400 kHz SWITCHING FREQ-MAX, PDSO10; CategoryPower/power management The power supply circuit; File Size431KB，30 Pages; ManufacturerMicrochip; Websitehttps://www.microchip.com; Environmental Compliance

Download Datasheet Parametric View All

TC1303B-FF1EMF Overview

0.5 A SWITCHING REGULATOR, 2400 kHz SWITCHING FREQ-MAX, PDSO10

TC1303B-FF1EMF Parametric

Parameter Name	Attribute value
Is it lead-free?	Lead free
Is it Rohs certified?	conform to
Maker	Microchip
Parts packaging code	DFN
package instruction	HVSON,
Contacts	10
Reach Compliance Code	compli
ECCN code	EAR99
Other features	AUTOMATIC PWM TO PFM MODE
Analog Integrated Circuits - Other Types	SWITCHING REGULATOR
control mode	CURRENT-MODE
Control Technology	PULSE WIDTH MODULATION
Maximum input voltage	5.5 V
Minimum input voltage	2.7 V
Nominal input voltage	3.6 V
JESD-30 code	S-PDSO-N10
JESD-609 code	e3
length	3 mm
Humidity sensitivity level	1
Number of functions	1
Number of terminals	10
Maximum operating temperature	85 °C
Minimum operating temperature	-40 °C
Maximum output current	0.5 A
Package body material	PLASTIC/EPOXY
encapsulated code	HVSON
Package shape	SQUARE
Package form	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
Peak Reflow Temperature (Celsius)	260
Certification status	Not Qualified
Maximum seat height	1 mm
surface mount	YES
Switch configuration	BUCK
Maximum switching frequency	2400 kHz
Temperature level	INDUSTRIAL
Terminal surface	Matte Tin (Sn)
Terminal form	NO LEAD
Terminal pitch	0.5 mm
Terminal location	DUAL
Maximum time at peak reflow temperature	40
width	3 mm

Preview

Download Datasheet

View All

TC1303B

500 mA Synchronous Buck Regulator,

+ 300 mA LDO with Power-Good Output

Features

• Dual-Output Regulator (500 mA Buck Regulator

and 300 mA Low-Dropout Regulator)

• Power-Good Output with 300 ms Delay

• Total Device Quiescent Current = 65 µA, Typ.

• Independent Shutdown for Buck and LDO

Outputs

• Both Outputs Internally Compensated

• Synchronous Buck Regulator:

- Over 90% Typical Efficiency

- 2.0 MHz Fixed Frequency PWM

(Heavy Load)

- Low Output Noise

- Automatic PWM to PFM mode transition

- Adjustable (0.8V to 4.5V) and Standard Fixed

Output Voltages (0.8V, 1.2V, 1.5V, 1.8V, 2.5V,

3.3V)

• Low-Dropout Regulator:

- Low-Dropout Voltage = 137 mV Typ. @

200 mA

- Standard Fixed Output Voltages

(1.5V, 1.8V, 2.5V, 3.3V)

• Power-Good Function:

- Monitors LDO Output Function (TC1303B)

- 300 ms Delay Used for Processor Reset

• Small 10-pin 3X3 DFN or MSOP Package

Options

• Operating Junction Temperature Range:

- -40°C to +125°C

• Undervoltage Lockout (UVLO)

• Output Short Circuit Protection

• Overtemperature Protection

Description

The TC1303B combines a 500 mA synchronous buck

regulator and 300 mA Low-Dropout Regulator (LDO)

with a power-good monitor to provide a highly

integrated solution for devices that require multiple

supply voltages. The unique combination of an

integrated buck switching regulator and low-dropout

linear regulator provides the lowest system cost for

dual-output voltage applications that require one lower

processor core voltage and one higher bias voltage.

The 500 mA synchronous buck regulator switches at a

fixed frequency of 2.0 MHz when the load is heavy

providing a low noise, small-size solution. When the

load on the buck output is reduced to light levels, it

changes operation to a Pulse Frequency Modulation

(PFM) mode to minimize quiescent current draw from

the battery. No intervention is necessary for smooth

transition from one mode to another.

The LDO provides a 300 mA auxiliary output that

requires a single 1 µF ceramic output capacitor,

minimizing board area and cost. The typical dropout

voltage for the LDO output is 137 mV for a 200 mA

load.

For the TC1303B, the power-good output logic level is

based on the regulation of the LDO output only. The

buck regulator can be turned on and off without affecting

the power-good signal.

The TC1303B is available in either the 10-pin DFN or

MSOP package.

Additional protection features include: UVLO,

overtemperature and overcurrent protection on both

outputs.

For a complete listing of TC1303B standard parts, con-

sult your Microchip representative.

Applications

•

Cellular Phones

Portable Computers

USB Powered Devices

Handheld Medical Instruments

Organizers and PDAs

Package Type

10-Lead DFN

SHDN2 1

IN2

OUT2

PG 4

GND

10 P

GND

9 L

8 V

IN1

7 SHDN1

6 V

FB1

OUT1

10-Lead MSOP

SHDN2 1

IN2

OUT2

PG 4

GND

10 P

GND

9 L

8 V

IN1

7 SHDN1

6 V

FB1

OUT1

2005 Microchip Technology Inc.

DS21949A-page 1

Recommended Resources

Xiangxuehai brand BCD-255 refrigerator circuit

Screen display driver circuit

CB950 control terminal application circuit diagram a

Message controller circuit diagram that uses voice to replace telephone ringtones

555 edible fungi automatic drying box circuit

Computer motherboard circuit diagram 810 2_35

After the stm32 timer is set to input capture, can the level of TI1 be changed by software?: I have been studying STM32 timer synchronization these days. In the official ST routines, there are several examples of timer synchronization. One of them is to use an external trigger to start a time...; vincent.liu stm32/stm8

The single chip microcomputer drives the LCD, and garbled characters are displayed?: After initializing the LCD screen, turning on the LCD display, and sending the command to set the cursor, the screen is full of small vertical lines. . . I haven't sent any data to it yet. . . What us...; 123456123 Embedded System

DSP library expands TI's embedded vision engine for driver assistance systems: The TI Vision SDK based on TI SYS/BIOS RTOS can run multiple algorithms in parallel on a wide range of heterogeneous cores and integrate new features into the system more easily. In addition, the rich...; 灞波儿奔 DSP and ARM Processors

IAR simulation single-step debugging is possible, but direct running is not: Have you ever encountered a situation where IAR simulation can be debugged in single step, but it cannot be run directly?...; 水货老手 Microcontroller MCU

[Renesas R7F0C80212 Trial] Design of anti-theft alarm for electric bicycles: [i=s]This post was last edited by Study_Stellaris on 2014-9-24 14:23[/i] Nowadays, there are more and more electric bicycles or motorcycles, and there are many thieves, so there are many kinds of anti...; Study_Stellaris Renesas Electronics MCUs

LPC compilation problem! Urgent: I found an OLED display program before. After compiling it in LPCxpresso without any problems, I created a new project and created a new main function according to its function. However, when compilin...; icey NXP MCU

Shortcut: 00 01 02 03 04 05 06 07 08 09 0A 0C 0F 0J 0L 0M 0R 0S 0T 0Z 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 1H 1K 1M 1N 1P 1S 1T 1V 1X 1Z 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 2G 2K 2M 2N 2P 2Q 2R 2S 2T 2W 2Z 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 3G 3H 3J 3K 3L 3M 3N 3P 3R 3S 3T 3V 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4M 4N 4P 4S 4T 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5E 5G 5H 5K 5M 5N 5P 5S 5T 5V 60 61 62 63 64 65 66 67 68 69 6A 6C 6E 6F 6M 6N 6P 6R 6S 6T 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7M 7N 7P 7Q 7V 7W 7X 80 81 82 83 84 85 86 87 88 89 8A 8D 8E 8L 8N 8P 8S 8T 8W 8Y 8Z 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9F 9G 9H 9L 9S 9T 9W

Popular Components