TC1303B-BN0EMF datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Power/power management> The power supply circuit> TC1303B-BN0EMF

TC1303B-BN0EMF: Description0.5 A SWITCHING REGULATOR, 2400 kHz SWITCHING FREQ-MAX, PDSO10; CategoryPower/power management The power supply circuit; File Size431KB，30 Pages; ManufacturerMicrochip; Websitehttps://www.microchip.com; Environmental Compliance

Download Datasheet Parametric View All

TC1303B-BN0EMF Overview

0.5 A SWITCHING REGULATOR, 2400 kHz SWITCHING FREQ-MAX, PDSO10

TC1303B-BN0EMF Parametric

Parameter Name	Attribute value
Is it lead-free?	Lead free
Is it Rohs certified?	conform to
Maker	Microchip
Parts packaging code	DFN
package instruction	3 X 3 MM, 0.9 MM HEIGHT, PLASTIC, DFN-10
Contacts	10
Reach Compliance Code	compliant
ECCN code	EAR99
Other features	AUTOMATIC PWM TO PFM MODE
Analog Integrated Circuits - Other Types	SWITCHING REGULATOR
control mode	CURRENT-MODE
Control Technology	PULSE WIDTH MODULATION
Maximum input voltage	5.5 V
Minimum input voltage	2.7 V
Nominal input voltage	3.6 V
JESD-30 code	S-PDSO-N10
JESD-609 code	e3
length	3 mm
Humidity sensitivity level	1
Number of functions	1
Number of terminals	10
Maximum operating temperature	85 °C
Minimum operating temperature	-40 °C
Maximum output current	0.5 A
Package body material	PLASTIC/EPOXY
encapsulated code	HVSON
Package shape	SQUARE
Package form	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
Peak Reflow Temperature (Celsius)	260
Certification status	Not Qualified
Maximum seat height	1 mm
surface mount	YES
Switch configuration	BUCK
Maximum switching frequency	2400 kHz
Temperature level	INDUSTRIAL
Terminal surface	Matte Tin (Sn)
Terminal form	NO LEAD
Terminal pitch	0.5 mm
Terminal location	DUAL
Maximum time at peak reflow temperature	40
width	3 mm

Preview

Download Datasheet

View All

TC1303B

500 mA Synchronous Buck Regulator,

+ 300 mA LDO with Power-Good Output

Features

• Dual-Output Regulator (500 mA Buck Regulator

and 300 mA Low-Dropout Regulator)

• Power-Good Output with 300 ms Delay

• Total Device Quiescent Current = 65 µA, Typ.

• Independent Shutdown for Buck and LDO

Outputs

• Both Outputs Internally Compensated

• Synchronous Buck Regulator:

- Over 90% Typical Efficiency

- 2.0 MHz Fixed Frequency PWM

(Heavy Load)

- Low Output Noise

- Automatic PWM to PFM mode transition

- Adjustable (0.8V to 4.5V) and Standard Fixed

Output Voltages (0.8V, 1.2V, 1.5V, 1.8V, 2.5V,

3.3V)

• Low-Dropout Regulator:

- Low-Dropout Voltage = 137 mV Typ. @

200 mA

- Standard Fixed Output Voltages

(1.5V, 1.8V, 2.5V, 3.3V)

• Power-Good Function:

- Monitors LDO Output Function (TC1303B)

- 300 ms Delay Used for Processor Reset

• Small 10-pin 3X3 DFN or MSOP Package

Options

• Operating Junction Temperature Range:

- -40°C to +125°C

• Undervoltage Lockout (UVLO)

• Output Short Circuit Protection

• Overtemperature Protection

Description

The TC1303B combines a 500 mA synchronous buck

regulator and 300 mA Low-Dropout Regulator (LDO)

with a power-good monitor to provide a highly

integrated solution for devices that require multiple

supply voltages. The unique combination of an

integrated buck switching regulator and low-dropout

linear regulator provides the lowest system cost for

dual-output voltage applications that require one lower

processor core voltage and one higher bias voltage.

The 500 mA synchronous buck regulator switches at a

fixed frequency of 2.0 MHz when the load is heavy

providing a low noise, small-size solution. When the

load on the buck output is reduced to light levels, it

changes operation to a Pulse Frequency Modulation

(PFM) mode to minimize quiescent current draw from

the battery. No intervention is necessary for smooth

transition from one mode to another.

The LDO provides a 300 mA auxiliary output that

requires a single 1 µF ceramic output capacitor,

minimizing board area and cost. The typical dropout

voltage for the LDO output is 137 mV for a 200 mA

load.

For the TC1303B, the power-good output logic level is

based on the regulation of the LDO output only. The

buck regulator can be turned on and off without affecting

the power-good signal.

The TC1303B is available in either the 10-pin DFN or

MSOP package.

Additional protection features include: UVLO,

overtemperature and overcurrent protection on both

outputs.

For a complete listing of TC1303B standard parts, con-

sult your Microchip representative.

Applications

•

Cellular Phones

Portable Computers

USB Powered Devices

Handheld Medical Instruments

Organizers and PDAs

Package Type

10-Lead DFN

SHDN2 1

IN2

OUT2

PG 4

GND

10 P

GND

9 L

8 V

IN1

7 SHDN1

6 V

FB1

OUT1

10-Lead MSOP

SHDN2 1

IN2

OUT2

PG 4

GND

10 P

GND

9 L

8 V

IN1

7 SHDN1

6 V

FB1

OUT1

2005 Microchip Technology Inc.

DS21949A-page 1

Recommended Resources

Ventilation fan automatic control circuit

Simple nickel-cadmium battery charger circuit diagram using TWH8778

Remote shutdown circuit diagram

555 multifunctional home appliance protector circuit (1)

Input status indication circuit

Photometric circuit using PbS, PbSe

Software and hardware design and implementation of Internet access solution based on DSP: With the development of modern network technology, embedded systems such as single-chip microcomputers and DSPs have an increasing demand for access to the network, such as electric meter systems with...; 咖啡不加糖 DSP and ARM Processors

Regarding the serial port driver, the implementation issue of the serial port receive soft FIFO.: The following structure is defined in the serial port driver to implement the reading of serial port received data. typedef struct __RX_BUFFER_INFO { ULONG Read; /* @field Current Read index. */ ULONG...; LIKEY Embedded System

Design of Embedded USB Host System Based on TTL Serial Port: [b]1 Introduction[/b] With the development of mobile storage industry and the popularization of digital products, the demand for mobile storage by data acquisition system, industrial control industry ...; huhuhu Embedded System

Can a 0 ohm resistor achieve the function of isolating the ground?: I would like to ask you, if I connect a 0 ohm resistor between the digital ground and the analog ground, can I achieve the isolation function?...; Jemima Analog electronics

The process of WEBENCH design + 12V to 24V design: First of all, you should know that this is the basic design of 12V to 24V, the basic design of switching power supply. With this design tool, it becomes very simple all of a sudden. First of all, the ...; led2015 Analogue and Mixed Signal

Thailand is short of chips and is coming to China for research?: I just found out about this from the official account of Guoxin FPGA Gaoyun Semiconductor and shared it with my friends in the forum~ This is the Gaoyun FPGA that was reviewed by a friend in the forum...; nmg Domestic Chip Exchange

Shortcut: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

Popular Components