Maximum DC forward current is determined by the overall thermal resistance and ambient temperature. Follow the curves in Figure 11 for current derating.
2:
Pulse forward current conditions: Pulse Width ≤ 10msec and Duty Cycle ≤ 10%.
3.
LEDs are not designed to be reverse biased.
4.
Solder conditions per JEDEC 020D. See Reflow Soldering Profile Figure 5.
5.
LED Engin recommends taking reasonable precautions towards possible ESD damages and handling the LZP-00H100 in an electrostatic protected area (EPA).
An EPA may be adequately protected by ESD controls as outlined in ANSI/ESD S6.1.
Optical Characteristics @ T
C
= 25°C
Table 5:
Parameter
PPF 280-800nm (@ I
F
= 700mA)
PPF 280-800nm (@ I
F
= 1000mA)
Radiant Flux (@ I
F
= 700mA)
Radiant Flux (@ I
F
= 1000mA)
Peak Wavelength
Viewing Angle
[2]
Total Included Angle
[3]
Symbol
Φ
Φ
Λ
P
2Θ
½
Θ
0.9
8 Deep Red
33
46
5.4
7.6
660
4 Far Red
13
19
1.9
2.7
740
Typical
8 Blue
[1]
25
33
7.7
10.3
450
125
140
4 Green
6
8
1.3
1.6
520
Total
77
106
16.3
22.2
Unit
umol/s
umol/s
W
W
nm
Degrees
Degrees
Notes for Table 5:
1.
When operating the Blue LED, observe IEC 62471 Risk Group 2 rating. Do not stare into the beam.
2.
Viewing Angle is the off axis angle from emitter centerline where the luminous intensity is ½ of the peak value.
3.
Total Included Angle is the total angle that includes 90% of the total luminous flux.
Electrical Characteristics @ T
C
= 25°C
Table 6:
Parameter
Forward Voltage (@ I
F
= 700mA)
[1]
Forward Voltage (@ I
F
= 1000mA)
[1]
Temperature Coefficient
of Forward Voltage
Thermal Resistance
(Junction to Case)
Symbol
V
F
V
F
ΔV
F
/ΔT
J
RΘ
J-C
8 Deep Red
18.8
20.0
-36.8
Typical
4 Far Red
8 Blue
8.2
25.6
8.8
26.4
-8.0
0.5
-16.0
4 Green
14.4
15.0
-11.6
Unit
V
V
mV/°C
°C/W
Notes for Table 6:
1.
Forward Voltage typical value is for all LED dice from the same color dice connected in series.
I saw "Getting Started with STM32 from Zero" and was confused right from the start. It seems that my starting point is negative! Is there any general introduction to the knowledge, tools and software ...
This chapter introduces the technical architecture used to support Internet of Things (IoT) applications and discusses some key IoT technologies and wireless protocols in detail.Gain insights into the...
EXTCLK is connected to 11.0592M crystal oscillator XIN is grounded CLKMD0 and CLKMD1 are both connected to high level. Timer0.Period = 0x1d4c0; Timer0.Counter = 0x1d4c0; Timer0.Control = 0x3f2; How lo...
I am now using msp430f169 to write programs.All functions are complete. Iam using LPM3 mode.When I power on and enter LPM3 mode, there is still 130ua current, which seems to be too high.I have disconn...
Activities currently being applied for1. Sipeed GW2A FPGA development board ( newly launched )
After being evaluated and praised by engineers in our forum, the domestic Gaoyun FPGA is coming again. Th...
Calling the IIC folder through the application layer in the BSP package does not work properly, so I have to switch to the bootloader layer to do temperature detection, but the interrupt cannot be tri...
Dong Yang, executive vice president of the China Association of Automobile Manufacturers, said on the 26th that according to the authorization of the Ministry of Industry and Information Technology...[Details]
ZTE
The communication embargo incident has impacted the communication industry and sounded the alarm for the semiconductor industry. Let's follow the embedded editor to learn more about the r...[Details]
In 2017,
Sanan Optoelectronics
achieved sales revenue of 8.394 billion yuan, operating profit of 3.856 billion yuan, and net profit attributable to shareholders of the parent company of 3.1...[Details]
1. Test conditions Hardware: STM32L432KC Main frequency: 80MHz Compiler: IAR 8.20.1 Compiler options: High Speed no size constraints CRC generator polynomial: 0x782f 2. Test Method The softwar...[Details]
Recently, the " ZTE
incident"
caused by the Sino-US trade war
has caused heated discussions in the electronics industry. It not only reflects that Chinese companies are lagging behind in the...[Details]
In Windows environment, the source code is encoded in UTF-8. If the source file created by STM32CubeMX contains Chinese comments, then using STM32CubeMX to regenerate the source code will cause the C...[Details]
This part of the code in the void SystemClock_Config(void) function in the main file generated by stm32cubemx RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; This bug occurs, and the f...[Details]
The last two blogs talked about a version problem of STM32CubeMX and the problem of hardware reset. When you solve these two problems, you will find that after the program is burned into the board, t...[Details]
Function List and Notes (lower-level driver part) 1. IO port initialization: control IO and communication IO. Control includes power control, reset and low power mode. Communication is the serial po...[Details]
Serial Port: 一. USART_ITConfig(USART1, USART_IT_TXE, ENABLE): As long as the transmit register is empty, there will always be an interrupt. Therefore, if you are not sending data, turn off the tran...[Details]
Automotive LCD Instrument Clock EMI Solution As early as 2014, the market size of China's automotive full LCD instrument has reached 3.506 billion yuan, and it is expected that by 2020, this s...[Details]
The application of millimeter wave technology in mobile communications also involves a series of technical problems, including the large propagation loss of millimeter waves and the susceptibility ...[Details]
Artificial Intelligence (AI) is undoubtedly the hottest topic in the technology industry in the past one or two years. In addition to the huge investments made by technology giants, financial and o...[Details]
Autonomous driving
and
5G
are the two hot topics that global companies and media are paying the most attention to, and the combination of the two is the focus of everyone's attention....[Details]
1. FSMC Brief FSMC, the Flexible Static Storage Controller, is capable of interfacing with synchronous or asynchronous memories and 16-bit PC memory cards. The FSMC interface of STM32 s...[Details]