PIC16(L)F18313/18323
Full-Featured, Low Pin Count Microcontrollers with XLP
Description
PIC16(L)F18313/18323 microcontrollers feature Analog, Core Independent Peripherals and Communication
Peripherals, combined with eXtreme Low Power (XLP) for a wide range of general purpose and low-power applications.
The Peripheral Pin Select (PPS) functionality enables pin mapping when using the digital peripherals (CLC, CWG, CCP,
PWM and communications) to add flexibility to the application design.
Core Features
• C Compiler Optimized RISC Architecture
• Only 48 Instructions
• Operating Speed:
- DC – 32 MHz clock input
- 125 ns minimum instruction cycle
• Interrupt Capability
• 16-Level Deep Hardware Stack
• Up to Four 8-bit Timers
• Up to Three 16-bit Timers
• Low-Current Power-on Reset (POR)
• Power-up Timer (PWRT)
• Brown-out Reset (BOR)
• Low-Power BOR (LPBOR) Option
• Extended Watchdog Timer (WDT) with Dedicated
On-Chip Oscillator for Reliable Operation
• Programmable Code Protection
Power-Saving Functionality
• IDLE mode: ability to put the CPU core to Sleep
while internal peripherals continue operating from
the system clock
• DOZE mode: ability to run the CPU core slower
than the system clock used by the internal periph-
erals
• SLEEP mode: Lowest Power Consumption
• Peripheral Module Disable (PMD): peripheral
power disable hardware module to minimize
power consumption of unused peripherals
Digital Peripherals
• Configurable Logic Cell (CLC):
- Two CLCs
- Integrated combinational and sequential logic
• Complementary Waveform Generator (CWG):
- Rising and falling edge dead-band control
- Full-bridge, half-bridge, 1-channel drive
- Multiple signal sources
• Capture/Compare/PWM (CCP) modules:
- Two CCPs
- 16-bit resolution for Capture/Compare modes
- 10-bit resolution for PWM mode
• Pulse-Width Modulators (PWM)
- Two 10-bit PWMs
• Numerically Controlled Oscillator (NCO):
- Precision linear frequency generator (@50%
duty cycle) with 0.0001% step size of source
input clock
- Input Clock: 0 Hz < F
NCO
< 32 MHz
- Resolution: F
NCO
/2
20
• Serial Communications:
- EUSART
- RS-232, RS-485, LIN compatible
- Auto-Baud Detect, auto-wake-up on start
- Master Synchronous Serial Port (MSSP)
- SPI
- I
2
C, SMBus, PMBus™ compatible
• Data Signal Modulator (DSM):
- Modulates a carrier signal with digital data to
create custom carrier synchronized output
waveforms
Memory
•
•
•
•
3.5 Kbytes Program Flash Memory
256B Data SRAM Memory
256B of EEPROM
Direct, Indirect and Relative Addressing Modes
Operating Characteristics
• Operating Voltage Range:
- 1.8V to 3.6V (PIC16LF18313/18323)
- 2.3V to 5.5V (PIC16F18313/18323)
• Temperature Range:
- Industrial: -40°C to 85°C
- Extended: -40°C to 125°C
eXtreme Low-Power (XLP) Features
•
•
•
•
Sleep mode: 40 nA @ 1.8V, typical
Watchdog Timer: 250 nA @ 1.8V, typical
Secondary Oscillator: 300 nA @ 32 kHz
Operating Current:
- 8
A
@ 32 kHz, 1.8V, typical
- 37
A/MHz
@ 1.8V, typical
2015-2018 Microchip Technology Inc.
DS40001799E-page 1
PIC16(L)F18313/18323
• Up to 12 I/O Pins:
- Individually programmable pull-ups
- Slew rate control
- Interrupt-on-change with edge-select
- Input level selection control (ST or TTL)
- Digital open-drain enable
• Peripheral Pin Select (PPS):
- I/O pin remapping of digital peripherals
• Timer modules:
- Timer0:
- 8/16-bit timer/counter
- Synchronous or asynchronous operation
- Programmable prescaler/postscaler
- Time base for capture/compare function
- Timer1 with gate control:
- 16-bit timer/counter
- Programmable internal or external clock
sources
- Multiple gate sources
- Multiple gate modes
- Time base for capture/compare function
- Timer2:
- 8-bit timers
- Programmable prescaler/postscaler
- Time base for PWM function
Flexible Oscillator Structure
• High-Precision Internal Oscillator:
- Software-selectable frequency range up to 32
MHz
- ±2% at nominal 4 MHz calibration point
• 4x PLL with External Sources
• Low-Power Internal 31 kHz Oscillator
(LFINTOSC)
• External Low-Power 32 kHz Crystal Oscillator
(SOSC)
• External Oscillator Block with:
- Three Crystal/Resonator modes up to
20 MHz
- Three External Clock modes up to 32 MHz
- Fail-Safe Clock Monitor
- Detects clock source failure
- Oscillator Start-up Timer (OST)
- Ensures stability of crystal oscillator
sources
Analog Peripherals
• 10-bit Analog-to-Digital Converter (ADC):
- Up to 11 external channels
- Conversion available during Sleep
• Comparator:
- Up to two comparators
- Fixed Voltage Reference at non-inverting
input(s)
- Comparator outputs externally accessible
• 5-bit Digital-to-Analog Converter (DAC):
- 5-bit resolution, rail-to-rail
- Positive Reference Selection
- Unbuffered I/O pin output
- Internal connections to ADCs and
comparators
• Voltage Reference:
- Fixed Voltage Reference with 1.024V, 2.048V
and 4.096V output levels
DS40001799E-page 2
2015-2018 Microchip Technology Inc.
PIC16(L)F18313/18323
PIC16(L)F183XX Family Types
Program Flash
Memory (Kbytes)
Data Sheet Index
Program Flash
Memory (Words)
10-bit ADC (ch)
Idle and Doze
Y
Y
Y
Y
Y
Y
Y
Y
Data Memory
(bytes)
High-Speed/
Comparators
10-bit PWM
Data SRAM
(bytes)
Clock Ref
5-bit DAC
Timers
(8/16-bit)
EUSART
Debug
(1)
I
I
I
I
I
I
I
I
I
2
C/SPI
I/Os
(2)
CWG
NCO
Device
PIC16(L)F18313
PIC16(L)F18323
PIC16(L)F18324
PIC16(L)F18325
PIC16(L)F18344
PIC16(L)F18345
Note
(1)
(1)
(2)
(3)
(2)
(3)
2048
2048
4096
8192
4096
8192
3.5
3.5
7
14
28
7
14
28
256
256
256
256
256
256
256
256
256
256
512
6
5
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
1
1
2
2
2
2
2
2
1
1
1
1
1
1
1
1
2/1
2/1
4/3
4/3
4/3
4/3
4/3
4/3
2
2
4
4
4
4
4
4
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1/1
1/1
1/1
2/2
2/2
1/1
2/2
2/2
2
2
4
4
4
4
4
4
1
1
1
1
1
1
1
1
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
12 11
12 11
1024 12 11
2048 12 15
512
18 17
1024 18 17
2048 18 21
PIC16(L)F18326
(4)
16384
PIC16(L)F18346
(4)
16384
1:
Debugging Methods: (I) – Integrated on Chip;
2:
One pin is input-only.
Data Sheet Index:
(Unshaded devices are described in this document.)
1:
DS40001799
PIC16(L)F18313/18323 Data Sheet, Full-Featured, Low Pin Count Microcontrollers with XLP
2:
DS40001800
PIC16(L)F18324/18344 Data Sheet, Full Featured, Low Pin Count Microcontrollers with XLP
3:
DS40001795
PIC16(L)F18325/18345 Data Sheet, Full Featured, Low Pin Count Microcontrollers with XLP
4:
DS40001839
PIC16(L)F18326/18346 Data Sheet, Full Featured, Low Pin Count Microcontrollers with XLP
Note:
For other small form-factor package availability and marking information, please visit
http://www.microchip.com/packaging
or contact your local sales office.
2015-2018 Microchip Technology Inc.
DS40001799E-page 3
PMD
Y
Y
Y
Y
Y
Y
Y
Y
DSM
CCP
CLC
PPS
XLP
PIC16(L)F18313/18323
Pin Diagrams
FIGURE 1:
8-PIN PDIP, SOIC, UDFN
V
DD
RA5
RA4
V
PP
/MCLR/RA3
1
2
3
4
8
7
6
5
V
SS
RA0/ICSPDAT
RA1/ICSPCLK
RA2
FIGURE 2:
14-PIN PDIP, SOIC, TSSOP
PIC16(L)F18313
FIGURE 3:
16-PIN UQFN
V
DD
NC
PIC16(L)F18323
V
DD
RA5
RA4
V
PP
/MCLR/RA3
RC5
RC4
RC3
1
2
3
4
5
6
7
14
13
12
11
10
9
8
V
SS
RA0/ICSPDAT
RA1/ICSPCLK
RA2
RC0
RC1
RC2
RA5
RA4
RA3/MCLR/V
PP
RC5
1
2
PIC16(L)F18323
3
4
5
6
7
8
16
15
14
13
NC
V
SS
12
11
10
9
RA0/ICSPDAT
RA1/ICSPCLK
RA2
RC0
Note 1:
It is recommended that the exposed bottom pad be connected to V
SS
, but must not be the main V
SS
connection to the device.
RC4
RC3
RC2
RC1
DS40001799E-page 4
2015-2018 Microchip Technology Inc.
TABLE 1:
PDIP/SOIC/UDFN
8-PIN ALLOCATION TABLE (PIC16(L)F18313)
Comparator
Reference
Interrupt
EUSART
Pull-up
Timers
MSSP
CLKR
Basic
ICDDAT/
ICSPDAT
ICDCLK/
ICSPCLK
—
MCLR
V
PP
CLKOUT
OSC2
CLKIN
OSC1
V
DD
V
SS
—
—
—
—
2015-2018 Microchip Technology Inc.
DS40001799E-page 5
CWG
PWM
I/O
(2)
NCO
DSM
ADC
DAC
CCP
RA0
RA1
RA2
RA3
RA4
RA5
7
ANA0
ANA1
—
V
REF
+
V
REF
-
—
—
—
C1IN0+
C1IN0-
—
—
C1IN1-
—
—
—
—
—
—
—
DAC1OUT
DAC1
REF
+
DAC1
REF
-
—
—
—
MDCIN1
(1)
MDMIN
(1)
—
—
—
MDCIN2
(1)
—
—
T0CKI
(1)
—
T1G
(1)
SOSCO
T1CKI
(1)
SOSCIN
SOSCI
—
—
TMR0
—
—
—
—
—
—
—
—
CCP1
(1)
CCP2
(1)
—
—
CCP1
CCP2
—
—
—
—
—
—
—
—
—
—
CWG1IN
(1)
—
—
—
—
SCK1
(1)
SCL1
(1,3,4)
SDA1
(1,3,4)
SDI1
(1)
SS1
(1)
—
—
—
RX
(1)
—
—
—
—
CLCIN3
(1)
CLCIN2
(1)
—
CLCIN0
(1)
—
CLCIN1
(1)
CLC
—
—
—
—
—
—
IOC
IOC
INT
(1)
IOC
IOC
IOC
IOC
Y
Y
Y
Y
Y
Y
5
4
3
2
ANA2
—
ANA4
ANA5
V
DD
V
SS
1
8
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
C1OUT
—
—
—
—
—
NCO
—
—
—
—
—
—
—
—
—
—
—
DSM
—
—
—
—
—
PWM5
PWM6
—
—
—
—
CWG1A
CWG1B
CWG1C
CWG1D
—
—
SDA1
(3)
SCL1
(3)
—
—
CK
DT
TX
—
—
—
CLC1OUT
CLC2OUT
—
—
—
—
CLKR
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
PIC16(L)F18313/18323
OUT
(2)
—
—
—
1:
2:
3:
4:
SDO1
SCK1
Note
Default peripheral input. Input can be moved to any other pin with the PPS input selection registers. See
Register 13-1.
All pin outputs default to PORT latch data. Any pin can be selected as a digital peripheral output with the PPS output selection registers. See
Register 13-2.
These peripheral functions are bidirectional. The output pin selections must be the same as the input pin selections.
These pins are configured for I
2
C logic levels as described in
Section 13.3 “Bidirectional Pins”;
clock and data signals may be assigned to any of these pins. Assignments to the other pins (e.g.,
RA5) will operate, but logic levels will be standard TTL/ST as selected by the INLVL register.
京公网安备 11010802033920号
EEWORLD
