1.63mm Round
®
Optopipe
TM
Optical Light Pipe, Panel Mount
R .05
[.002}
MAX
DIFFUSED FRONT
SURFACE
1.52
[.006]
45°
60° REF
(TYP)
Ø .84
[Ø .033]
Dialight
515-1016
Alternative
MicroLED SMT LEDs
for use with 515-1016
PART NO.
597-2x01-2xx
597-2xx1-4xx
LED alternatives may not produce optimum
light output
1.22
[.048]
2.16
[.085]
4.14
[.163]
Ø 1.63
[Ø .064]
Ø .94
[Ø .037]
(MAJOR DIA)
.51
[.020]
MAX
DIRECTION OF
OUTPUT
TOP
SURFACE
OF LED
Dimensions in mm [inches]
RECOMMENDED PLACEMENT OF LED
Benefits
•
•
•
•
•
High transmissivity polycarbonate material
UL94V-0 compliance
ESD protection (circuit isolation from front panel)
Wide viewing angle
Secures to panel by press-fit
LED Data
For absolute maximum ratings and other electrical and optical
data on the recommended LEDs, refer to LED data sheets.
Operating/Storage Temperature
–30°C to +100°C
Dialight
Optopipe
Light Pipe Applications
This Optopipe’s™ larger light emitting surface appears bright. It is reliably held in the panel by 3 press-fit splines. This
Optopipe™ functions as a through-the-case indicator with a textured finish on the light-emitting surface that increases its
viewing angle. The light sources can be one of Dialight’s 597 Series SMT LEDs. The light source’s emitting surface should
be located no more than 0.020" or 0.5mm from the Optopipe™. The light pipe material is water clear transmissive poly-
carbonate rated UL94-V0, and has a 35% oxygen index.
Dialight can provide custom Optopipe™ solutions for your applications. Contact your local representative, listed in the
Appendix, for further information.
Dialight Corporation • 1913 Atlantic Avenue • Manasquan, NJ 08736 • TEL: (732) 223-9400 • FAX: (732) 223-8788 • www.dialight.com
京公网安备 11010802033920号
EEWORLD
