Blackfin® USB-LAN EZ-Extender Board
Support Package (BSP) v1.0.0 Release
Notes
Thank you for installing the USB-LAN EZ-Extender Board Support Package (BSP). The
BSP provides software and documentation in support of the USB-LAN EZ-Extender
daughter board. This daughter board is used in conjunction with
ADSP-BF533 EZ-KIT®
Lite, ADSP-BF537 EZ-KIT® Lite, ADSP-BF561 EZ-KIT® Lite.
The USB-LAN EZ-Extender is designed for use with CrossCore® Embedded Studio
(CCES) for Analog Devices Processors software development tools. The CCES
development environment aids advanced application code development and debug,
such as:
Create, compile, assemble, and link application programs written in C++, C, and
assembly
Load, run, step, halt, and set breakpoints in application programs
Read and write data and program memory
Read and write core and peripheral registers
Plot memory
For more details on CCES, please visit
www.analog.com/cces.
For more on the USB-
LAN EZ-Extender, please visit
http://www.analog.com/en/evaluation/bf-
extenderul/eb.html
The USB-LAN EZ-Extender BSP provides comprehensive software support for the
USB-LAN EZ-Extender daughter board. Specifically, drivers and examples are included
for the following components:
SMSC LAN91c111 Ethernet controller
Net2272 USB Controller
The BSP also provides comprehensive examples which demonstrate the
services. TCP/IP examples based on USB-LAN EZ-Extender are available in the lwIP
product which uses this BSP. USB Vendor Class based examples are present inside
the BSP itself which demonstrates the data transfer over Bulk endpoints.
The CCES Help environment provides complete hardware and software documentation.
License Checking
There are no license requirements for the USB-LAN EZ-Extender BSP.
Installation Logging
The installer does not create a log file by default. If you encounter installation issues,
you can generate an installation log file by running the installer from the command
prompt.
Change to the directory containing downloaded installer executable and run the
following from the command prompt:
ADI_USBLAN_EI1_EZExtender-Rel1.0.0.exe
/v"/l*v c:\temp\installer.log"
Support and Assistance
There are several options for contacting support:
Submit your questions online at:
o
http://www.analog.com/support
E-mail your Processor and DSP software and development tools questions from
within CrossCore Embedded Studio:
o
Go to “Help->E-mail Support…”. This will create a new e-mail addressed
to
processor.tools.support@analog.com,
and will automatically attach your
CrossCore Embedded Studio version information (ProductInfo.html).
E-mail your Processors and DSP applications and processor questions to:
o
processor.support@analog.com
OR
o
processor.china@analog.com
(Greater China support)
Post your questions in the Processors and DSP online technical support
community in Engineer Zone at:
o
http://ez.analog.com/community/dsp
Software Requirements
To build the example projects included in the USB-LAN EZ-Extender BSP CrossCore
Embedded Studio Release 1.0.1 or later is required. For TCP/IP examples using USB-
LAN EZ-Extender lwIP (Lightweight TCP/IP Stack) Rel 1.0.1 or later is required.
Test Configurations
The products and versions used to test the BSP are
1. CrossCore® Embedded Studio Release 1.0.1
2. lwIP for CorssCore Embedded Studio Rel 1.0.1
3. USB-LAN EZ-EXTENDER Card Revision 2.1
Adding a Driver to a Project
When adding "Net2272 USB Device Controller Driver" add-in, the IDE will add the
sources for the driver to the CCES Project folders, starting at "system". There will be a
folder specific to the driver(s) or service(s) you have added under this folder.
When adding SMSC LAN91c111 Ethernet module the IDE will add the required include
paths and pre-built binaries to your project.
Creating a project which includes a USB-LAN EZ-Extender drivers
In order to create a project you should follow the instructions provided in
the CrossCore® Embedded Studio help. As part of the project creation, the page "Add-
in selection" contains a list of all the available add-ins for the project that you are
creating based on the installed products and the project's chosen processor and type.
You can see the drivers in support of the USB-LAN EZ-Extender under the "Device
Drivers and System Services" category. Within this category you will see "USB LAN EI1
Extender Board Drivers" which contains the drivers for "Net2272" and you will also see
"Etherent" which contains the SMSCLAN91c111 driver binary.
The USB-LAN EZ-Extender add-in generates a call to adi_initComponents(). For more
information on adi_initComponents(), please refer to the CCES help section:
CrossCore Embedded Studio Release 1.0.1 > Graphical Development Environment >
System Configuration
Adding a driver to an existing project
Every CrossCore Embedded Studio project contains a System Configuration file
called
system.svc
which is located in the root of the project. The file is the IDE's
interface for managing the various pre-written software components used in the
"system" implemented by a project. Double-clicking any
system.svc
file in a navigation
view opens that file in the System Configuration Utility which allows you to see the add-
ins that you currently have in your project. Click on "Add..." and select the "USB-LAN EI
Extender Board Drivers" add-in which is under the "Device Drivers and System
Services". For adding USB driver select "NET2272 USB Device Controller driver" under
"USB". For adding "LAN91c111" Ethernet binaries select "SMSC LAN91c111 Etherent
Module".
Notes:
If the IDE detects that
adi_initComponents()
is not yet present in
main()
, it
prompts you to add it and offers to insert it for you.
Configuration
There are no USB-LAN EZ-Extender driver configuration options available in the IDE.
Interrupts
CrossCore Embedded Studio provides a coherent interrupt management mechanism
which allows for the same interface to be used in RTOS and non-RTOS applications.
This means that interrupt service routines in all applications must be written in C and
use the adi_int interface. Any thread-safety requirements or interactions with tasks are
handled by the adi_int interface. For more information on the adi_int API, in CrossCore
Embedded Studio go to Help > Search and enter adi_int.
Examples of the usage of this interrupt management mechanism are the System
Services and Device Drivers provided with Crosscore Embedded Studio. By using the
adi_int interface, the same services and drivers can be used in all applications
regardless of whether an operating system is used.
Sketches and Examples
Sketches
None
Examples
The USB-LAN EZ-Extender BSP provides the following examples.
1. USB Vendor bulk example for ADSP-BF533 and ADSP-BF561.
Note: TCP/IP examples based on LAN91c111 driver are provided in lwIP (Lightweight
TCP/IP Protocol Stack) Release 1.0.1 or later.
Location
In order to locate the USB-LAN EZ-Extender examples you can use the following:
Open CrossCore Embedded Studio's Example Browser which can be found in
CrossCore Embedded Studio under Help. Select in the Product section "USB-
LAN EZ-Extender" for a full list of examples.
Import projects located in your USB-LAN EZ-Extender BSP installation folder
under the example directory in product installation
(<USB_LAN_EZ_Extender_installation_root>\BF_USB-LAN_EZ-
Extender\Blackfin\Examples).
Documentation
API documentation for the drivers included in the USB-LAN EZ-Extender BSP can be
found in CCES Help under
Blackfin® USB-LAN EZ-Extender® Board Support
Package 1.0.0.
General information on the driver model can be found in CCES help under
CrossCore® Embedded Studio 1.0.1 > System Runtime Documentation > System
Services and Device Drivers
MISRA-C Support
MISRA C is a software development standard for the C programming language
developed by the Motor Industry Software Reliability Association (MISRA). Its aims are
to facilitate code safety, portability, and reliability in the context of embedded systems,
specifically those systems programmed in ANSI C. The compiler detects violations of
the MISRA rules at compile-time, link-time, and run-time.
System Services and Device Driver Thread Safety
All system services and device drivers (SSLDD) use mutexes and semaphores to
ensure thread-safety. If an RTOS is present then the SSLDD will use the RTOS mutex
and semaphores. If an RTOS is not present then the SSLDD will use a non-RTOS
implementation of mutexes and semaphores (spin locks).
Known issues:
TAR-49871: On ADSP-BF561 platform VendorBulkDemoBF561 example may crash if
heap is placed on L1. By default heap is placed on L2 memory.
京公网安备 11010802033920号
EEWORLD
