983-10-FRA-4"X18" datasheet, PDF

Datasheet> All Categories > accessories> 983-10-FRA-4"X18"

983-10-FRA-4"X18": DescriptionTAPE MARKING WHITE 4"X 50YDS; Categoryaccessories; File Size121KB，7 Pages; Manufacturer3M; Websitehttp://3M.com/esd; Environmental Compliance

Download Datasheet Parametric View All

983-10-FRA-4"X18" Overview

TAPE MARKING WHITE 4"X 50YDS

983-10-FRA-4"X18" Parametric

Parameter Name	Attribute value
Tape type	Distinctive marking tape
Adhesive	Pressure Sensitive Adhesive (PSA)
base fabric, carrier	liner
thickness	0.0020"（2.0 mils，0.051mm）
Thickness - Adhesive	-
Thickness - base fabric, carrier	-
width	4.00"（101.60mm）
length	150' (45.7m) 50 yards
color	White
use	mark, reflection
temperature range	60°F（15°C）
Shelf life start date	Ship date
shelf life	24 months

Preview

Download Datasheet

View All

Transportation Safety Division

3M™ Diamond Grade™

Conspicuity Markings Series 983

Product Bulletin Series 983

April 2018

Replaces Product Bulletin 983 Dated April 2017

Description

3M Diamond Grade Conspicuity Markings Series 983 are highly retroreflective microprismatic markings designed

to enhance the visibilities of the sides and rears of vehicles. These reflective markings consist of prismatic lenses

that are formed in a transparent, synthetic resin, and sealed and backed with a pressure sensitive adhesive and

clear polymeric liner. Diamond Grade Conspicuity Markings are highly durable, providing up to ten years of field

performance. 3M's Series 983 markings have excellent angularity which provides enhanced visibility for drivers.

For warranty and product information on specific applications, such as trucks and trailers, rail cars, school buses, or

emergency vehicles, please see the specific product bulletins. This product bulletin applies to applications other

than trucks and trailers, rail cars, school buses, or emergency vehicles.

•

Combined fluorescence and retroreflection provides 24-hour visibility and detection.

Fluorescence enhances visibility.

For details of the features and benefits of Series 983 sheeting, please refer to the 3M Transportation Safety

Division website (http://www.3M.com/roadsafety/).

Conspicuity Markings Series 983 is available in the following colors.

Table 1. Product Codes by Color

Color

White

Yellow

Red

Fluorescent Yellow

Fluorescent Yellow-Green

Product Code

983-10

983-71

983-72

983-21

983-23

3M™ Diamond Grade™ Conspicuity Markings Series 983

April 2018

Below are some conditions and processing examples that may lead to reduced durability:

•

Failure to cut markings around rivets, seams, and body panels

Improper use of high pressure cleaning

Contact with non-recommended chemicals or solvents

Improper application or surface preparation

Horizontal exposure

Open cells along the edges of a marking may collect dirt, which will not reduce marking performance

Damage due to external conditions may reduce adhesion and reflectivity near the damaged area

Health and Safety Information

Read all health hazard, precautionary, and first aid statements found in the Safety Data Sheet (SDS), Article

Information Sheet, and/or product labels of chemicals prior to handling or use. Consult local regulations and

authorities for possible restrictions. Visit us at

www.3M.com/us

and select SDS search to obtain current Safety

Data Sheets.

Warranty Information

9.1 3M Basic Product Warranty

3M Diamond Grade Conspicuity Marking Series 983 (“Product”) is warranted (“Basic Warranty”) to be free of

defects in materials and manufacture at the time of shipment and to meet the specifications stated in this product

bulletin. If the Product is proven not to have met the Basic Warranty on its shipment date, then a buyer’s exclusive

remedy, and 3M’s sole obligation, at 3M’s option, will be a refund or replacement of the Product.

9.2 Additional Warranty

For additional warranty information on specific applications such as trucks and trailers, rail cars, school buses or

emergency vehicles, please see the specific product bulletins for those applications.

9.3 Terms and Conditions

•

Product must be processed and applied to a vertically-mounted (±20º) 3M recommended substrate as described

in this product bulletin and in accordance with all 3M application, fabrication, and cleaning procedures provided

in 3M's product bulletins, information folders (including but not limited to

3M Information Folder 4.9),

and

applicable technical memos (which will be furnished to the manufacturer upon request).

Any third-party imaging or altering of the Product not endorsed by 3M will void the 3M Warranty.

A Product's failure to meet the 3M Warranty must be solely the result of design or manufacturing defects in the

Product and not of (a) outside causes including improper storage, fabrication, handling, maintenance, or

installation; (b) use of process colors, thinners, coatings, or other chemicals not recommended by 3M; (c) use of

application procedures not recommended by 3M; (d) exposure to chemicals or solvents not recommended by

3M; (e) abrasion and other physical damage; (f) snow or any other burial of the marking; (g) collisions, vandalism,

or malicious mischief; or (h) an act of God.

3M reserves the right to determine the method of replacement. Replacement product will carry the unexpired

warranty of the Product it replaces.

Claims made under this warranty will be honored only if 3M is presented with a traceable record of the Product's

Installation Date, 3M is notified of a potential failure within thirty days of discovery, reasonable information

requested by 3M is provided, and 3M is permitted to verify the cause of the failure.

•

9.4 Exclusive Limited Remedy and Disclaimer

If the Product is proven not to have met the 3M Warranty during the Warranty Period, then the purchaser's and

user's exclusive remedy, and 3M's sole obligation, at 3M's option, shall be that 3M will provide replacement of the

Product.

THE 3M WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT

NOT LIMITED TO ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, OR FITNESS FOR A

PARTICULAR PURPOSE, OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING OR OF

PERFORMANCE, CUSTOM, OR USAGE OF TRADE.

Recommended Resources

LED light circuit diagram powered by solar cells

Solid state relay circuit one a

Low Cost Integrated Circuit Power Amplifier 01

Jinhao CBJ128-B multi-purpose non-stick electric heating pan circuit diagram

square wave divider

Improved ZCT-PWM converter topology

BAW filters help 5G: With the rapid development of mobile Internet and Internet of Things, and the emergence of more and more smart devices, there will be great communication needs in various fields such as AR/VR, ultra-h...; 石榴姐 RF/Wirelessly

When measuring capacitance with a capacitance meter, a negative sign is displayed before the measurement result. I swapped the needles and it still displays a negative sign. Why?: When measuring capacitance with a capacitance meter, a negative sign is displayed before the measurement result. Even if the needle is swapped, the negative sign is still displayed. What is the reason...; 深圳小花 PCB Design

TI M4 processor: I used to work on PIC microcontroller software, but now I want to learn TI M4 processor. Can you give me some advice? (It would be best if you can recommend a development board)....; kebinliu Microcontroller MCU

Photovoltaic grid-connected simulation device based on TMS320F28335: Photovoltaic grid-connected simulation device based on TMS320F28335...; taburiss001 Microcontroller MCU

Are there any examples of using a microcontroller to collect data and then transmit it via a serial port?: Because I haven't been exposed to MCU applications for a long time, I want to see if there are any examples in this area that I can refer to. Thank you! !...; 叶志红 Embedded System

Has anyone used H-Jtag debugging on a laptop using the parallel port?: This is: On PC, I run IAR and ADS project files, and there are no problems. I use my own debugging board + H-JTAG, and they are all normal. When I switch to laptop, when using H-JTAG, the hardware det...; bb_008 Embedded System

Shortcut: S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 SA SB SC SD SE SF SG SH SI SJ SK SL SM SN SO SP SQ SR SS ST SU SV SW SX SY SZ T0 T1 T2 T3 T4 T5 T6 T7 T8 T9 TA TB TC TD TE TF TG TH TI TJ TK TL TM TN TO TP TQ TR TS TT TU TV TW TX TY TZ U0 U1 U2 U3 U4 U6 U7 U8 UA UB UC UD UE UF UG UH UI UJ UK UL UM UN UP UQ UR US UT UU UV UW UX UZ V0 V1 V2 V3 V4 V5 V6 V7 V8 V9 VA VB VC VD VE VF VG VH VI VJ VK VL VM VN VO VP VQ VR VS VT VU VV VW VX VY VZ W0 W1 W2 W3 W4 W5 W6 W7 W8 W9 WA WB WC WD WE WF WG WH WI WJ WK WL WM WN WO WP WR WS WT WU WV WW WY X0 X1 X2 X3 X4 X5 X7 X8 X9 XA XB XC XD XE XF XG XH XK XL XM XN XO XP XQ XR XS XT XU XV XW XX XY XZ Y0 Y1 Y2 Y4 Y5 Y6 Y9 YA YB YC YD YE YF YG YH YK YL YM YN YP YQ YR YS YT YX Z0 Z1 Z2 Z3 Z4 Z5 Z6 Z8 ZA ZB ZC ZD ZE ZF ZG ZH ZJ ZL ZM ZN ZP ZR ZS ZT ZU ZV ZW ZX ZY

Popular Components