Duty cycle 0.1 to 100.0% (increments of 0.1%), Output pulse frequency 15 to 5,000 Hz (increments of 1 Hz): 4 points (Q0, Q2, Q4, Q6) (Adjust 5µs minimum as ON
time and 15µs minimum as OFF time.)
USB mini-B (maintenance communication)
Maintenance communication (server), user communication TCP (server/client), user communication UDP, Modbus TCP (server/client), Email, Web Server, PING,
SNTP, FTP server/client
Maintenance communication (server), user communication TCP (server/client), user communication UDP, Modbus TCP (server/client), PING
Two cartridges can be added (when using FC6A–HPH1)/One cartridge can be added (when using FC6A–PH1)
Embedded
Yes
Pulse Output
(transistor output model
only)
*1: 1 step equals 8 bytes.
*2: Not including expansion I/O service time, counter timer processing time, data link processing time, and interrupt processing time.
*3: A maximum of 5 modules can be connected when using the expansion interface module separate type master.
*4: Transistor output model
*5: Communication module cannot be connected.
INPUT SPECIFICATIONS
Part No.
Input Points
Rated Input Voltage
Input Voltage Range
Rated Input Current
Input Impedance
Turn ON Time
Input Delay
Turn OFF Time
Isolation
Input Type
External Load for I/O Interconnection
Signal Determination Method
Effect of Improper Input Connection
Cable Length
Insertion Durability
Connector
Applicable Ferrule
FC6A-D16R1CEE
FC6A-D16P1CEE
FC6A-D16K1CEE
8 (8/1 common)
24V DC: 24V DC sink/source input signal
0 to 28.8V DC
High speed input port 5mA/pt, middle/normal speed input port 7mA/pt
High speed input port 4.9kΩ, middle/normal speed input port: 3.4kΩ
High speed input port: 5μs + filter value
Middle speed input port: 35μs + filter value
Normal speed input port: 35μs + filter value
High speed input port: 5μs + filter value
Middle speed input port: 35μs + filter value
Normal speed input port: 100μs + filter value
Between input terminals: Not isolated
Internal circuit: Optocoupler-isolated
FC6A-D32P3CEE
FC6A-D32K3CEE
16 (16/1 common)
Type1 (IEC 61131-2)
Not needed
Static
Both sinking and sourcing input signals can be connected, therefore reverse connection does not cause damage.
If any input exceeding the rated value is applied, permanent damage may be caused.
20,000,000 operations minimum (no load 18,000 operations/hour)
Resistive load: 240V AC 2A, 30V DC 2A
Inductive load: 240V AC 2A (cos ø = 0.4), 30V DC 2A (L/R =7 ms)
100 times minimum
1-wire: AI 0.5-8 WH (Phoenix Contact)
2-wire: AI-TWIN 2×0.5-8 WH (Phoenix Contact)
TRANSISTOR OUTPUT SPECIFICATIONS
Part No.
Transistor Output Points
Output Type
Transistor Sink
Transistor Source
FC6A-C16P1CEE
FC6A-C16K1CEE
8 (8/1 common)
FC6A-D16K1CEE/FC6A-D32K3CEE
FC6A-D16P1CEE/FC6A-D32P3CEE
24V DC
19.2 to 28.8V DC
0.5A
4.0A
High speed input port: 5μs
Normal speed input port: 300μs
High speed input port: 5μs
Normal speed input port: 300μs
Between output terminal and Internal circuit: Optocoupler-isolated
Between output terminals: Not isolated
1V max (voltage between COM and output terminal when output is on.)
1A
0.1mA maximum
39V ±1V
12W
L/R=10ms (28.8V DC, 1Hz)
Transistor Sink Output: No
Transistor Source Output: Overcurrent is detected by current limit resistance. (*1)
100mA maximum, 24V DC (power voltage at the +V terminal, -V terminal at source)
100 times minimum
1-wire: AI 0.5-8 WH (Phoenix Contact)
2-wire: AI-TWIN 2×0.5-8 WH (Phoenix Contact)
—
2.4W
0.2A
0.1A
1.6A
FC6A-D32P3CEE
FC6A-D32K3CEE
16 (16/1 common)
Rated Load Voltage
Voltage Tolerance
Rated Load
Current
Output Delay
Isolation
Voltage Drop (ON Voltage)
Inrush Current
Leakage Current
Clamping Voltage
Maximum Lamp Load
Inductive Load
Overcurrent Protection
External Current Draw
Insertion Durability
Connector
Applicable Ferrule
Per Point
Per Common
Turn ON Time
Turn OFF Time
*1: This overcurrent signals consist of one signal per 4 point outputs. When microprocessor gets this overcurrent signal by interrupt input, microprocessor turns off 4pt outputs of this category at fixed time (approx. 1sec).
Fuses can be divided into many types. The following mainly discusses the issues of slow-blow and fast-blow. Fast-blow fuses will melt instantly as long as the current exceeds its rated value, and can ...
Why is it so difficult to post a message? It's so sad. I finally typed so many words, but it... it... it... it... is not responding. I almost want to die. To make a long story short, the board is fina...
I want to use the IO port of 430 to make a keyboard and use the falling edge interrupt of P1, but the data sheet says that the reset value of the PxIN register is a random value, and PxIN is a read-on...
[color=#3e3e3e]TI recently released the new MSP430FR2311 MCU to extend the battery life in sensing and measurement applications. This device is the industry's only MCU with an integrated low-leakage t...
Great masters, I am about to graduate, but I have to do a graduation project! :Cry: I chose zigbee, but I have never touched it. I have looked at it these two days and have no idea. :Sad: I would like...
I saw the post posted by lyzhangxiang yesterday. After talking to him last night, I gave up the hesitation. I decided to play with contiki first. (What? Are you as confused as I am? Have you heard tha...
The Portable Digital Data Acquisition System (PDDAS) uses LabVIEW Real-Time and PXI to control the wind tunnel test and record air pressure data from 128 different channels.
"The LabVIEW Real-...[Details]
Battery life is critical for portable applications. For applications such as smoke detectors, security devices, and thermostats, factory-installed batteries need to last for more than 10 years. The...[Details]
My colleague and I spent the day chatting in the hotel bar. We had met with several customers. We were both wondering how come these engineers we were meeting knew almost nothing about analog techn...[Details]
In the analysis of electronic circuits, static analysis (also known as DC analysis) is the basis of circuit analysis. However, it is well known that electronic components are nonlinear, so the anal...[Details]
RS-422 and RS-485 are both serial data interface standards, which were developed and published by the Electronic Industries Association (EIA). RS-422 defines a balanced communication interface with a ...[Details]
Describe how to meet the challenges of complexity with a modern wiring design toolset. Option codes and expressions can simulate the variables of an automotive project. A full-featured tool suite c...[Details]
0 Introduction
Ultrasonic waves
are mechanical waves with a frequency of more than 20KHz, and the propagation speed in the air is about 340 m/s (at 20°C). Ultrasonic waves can be gene...[Details]
introduction
At present, the research on micron and nanotechnology is very active, which has led to the rapid development of microtechnology and micro-mechanical electronic system (MEMS) t...[Details]
This article introduces a high-reliability, high-power automatic water supply device made with 89C2051 single-chip microcomputer, which has phase loss detection, over-temperature detection, over-cu...[Details]
At present, more than 40 fieldbuses have been developed in the world, among which CAN bus is suitable for application in automobile inspection lines because of its unique features such as strong re...[Details]
A stepper motor is a motor that converts electrical pulse signals into linear or angular displacements. However, the control of stepper motors is usually developed in assembly language or C languag...[Details]
1 Principle and composition of micro-range radar
1.1 Ranging method
There are usually three methods for radar ranging: pulse ranging; frequency modulated continuous wave ranging; phase ...[Details]
1 Design of Electric Vehicle Battery Management System
With the increasing shortage of energy, rising oil prices, and urban environmental pollution, the development and utilization...[Details]
As the automobile consumer market heats up, the safety performance of automobiles has attracted more attention from consumers. When driving at high speed, tire failure is the most worrying and diff...[Details]
0 Introduction
One of the most important functions of radar is to track and measure the distance of the target. Firstly, the basic principle of radar ranging tracking is explained, and a new...[Details]
Power technology
京公网安备 11010802033920号
EEWORLD
