Metal-Out Static Shielding Bag 1500
This transparent metal-out static shielding bag is designed to provide static
safe packaging for the shipment and/or storage of ESD sensitive items
including outside ESD protected areas. Bags are printed with an ESD
protective symbol and a lot code for traceability. Open Top and ZipTop styles
are available. The bags are heat sealable.
SCS Metal-Out Static Shielding Bags 1500 are manufactured from a top
coat, metal, polyester, polyethylene laminate. The proprietary top coating is
designed to protect the metal layer. Polyester dielectric, in concert with the
metal layer, is intended to provide shielding of Electrostatic Discharge (ESD)
and to help minimize the penetration of electric field.
Open Top Bag
Open Top Bag
ZipTop
Bag
ZipTop
Bag
Meets ANSI/ESD S20.20 Packaging Standard, ANSI/ESD S541, and
Static Control Bag ANSI/ESD S11.4 Level 3
Physical
Puncture Resistance
Seal Strength
Thickness
Marking Adhesion
Transparency
Electrical
Discharge Shielding
Surface Resistance -
Interior
Surface Resistance -
Exterior
Charge Retention
Cleanliness
Silicone
Typical Value
10 lbs, 44 N
14 lbs, 62 N
3 mils, .0762 mm +/-10%
Pass
40%
Typical Value
<10 nJ
1 x 10
4
to < 1 x 10
11
ohms
1 x 10
4
to < 1 x 10
6
ohms
<100 volts
Typical Value
Not Detected
Typical Value
300ºF – 375°F, 149ºC – 190°C
0.5 – 3.5 seconds
30 – 70 PSI, 206 – 482 KPa
Testing Method
MIL-STD-3010 Method
2065
ASTM D882
MIL-STD-3010 Test Method
1003 Method B
IPC-TM-650 2.4.1
Tobias
Testing Method
ANSI/ESD STM11.31
ANSI/ESD STM11.11
ANSI/ESD STM11.11
1410.515 Rev 2
Testing Method
ASTM-E168 (FTIR)
Tolerance: Width -0, +1/4"
Width -0, +0.250 Length +/- 0.125 Offset O to 0.250
Note: Standard bag markings shown
Tolerance (inches):
Length
Seal width +/-
0 to 1/4"
+/- 1/8" Offset
0.125
above and are not to scale.
Seal width 3/8" with a tolerance of +/- 1/8"
Heat Sealing Conditions
Temperature
Time
Pressure
Bag is free of amines, N-octanoic acid, silicones and heavy metals.
This product is intended for commercial use only. This product is not on
the Qualified Product Listing under the Defense Standardization Program.
RoHS 2, REACH, and Conflict Minerals Statement
None of the RoHS 2 restricted materials or REACH substances of very high concern as
of 2014/12/17, or Conflict Minerals are intentionally added in manufacturing this product.
Ref: European Union Directive 2011/65/EU and Regulation (EC) No. 1907/2006/CE.
See
SCS Warranty, Limitation of Liability and Remedies
Specifications and procedures subject to change without notice.
1500 SERIES METAL-OUT STATIC SHIELDING BAG
926 JR Industrial Drive, Sanford, NC 27332
WEB SITE:
StaticControl.com
PHONE (919) 718-0000
DRAWING
NUMBER
1500 Series
November
2015
DATE
© 2015 DESCO INDUSTRIES INC.
Employee Owned
Analog electronics
京公网安备 11010802033920号
EEWORLD
