Technical Data
February, 2009
3M
™
Electrically Conductive Acrylic Pad (eCAP) 7805
Product Description
3M™ Electrically Conductive Acrylic Pad (eCAP) represents a breakthrough in electrically conductive PSA tape and
conductive gasket technology. 3M™ Electrically Conductive Acrylic Pad 7805, a double sided tape, consists of a high
performance 3M adhesive loaded with conductive fillers and is ideal for EMI/RFI shield and EMI/RFI gasket to metal
surfaces. The PSA matrix is filled with silver coated fillers which allow interconnection between substrates through the
adhesive thickness (the “Z-axis”) and also provides electrically conducting in the plane of the adhesive (“X-Y Axis”). 3M
eCAP 7805 is ideal for electrical bonding and ESD grounding of electronic and electrical devices. 3M eCAP 7805 can be
applied as die cut parts or in roll form and has good adhesion to common EMI/RFI substrates such as aluminum, stainless
steel, and smooth gasket materials. 3M eCAP 7805 also electrically connects and mechanically bond EMI/RFI shield and
gasket to metal frames and enclosures. The low contact resistance and tape construction result in good EMI performance.
Patented Technology
3M™ Electrically Conductive Acrylic Pad 7805 is a self-stick EMI gasket pad or tape which provides good electrical
conductivity for EMI shielding and ESD grounding. Made with a proprietary technology, the pad achieves a unique filler
distribution in three dimensional structure throughout the adhesive matrix. This makes the tape an excellent choice for use
near electronic components and assemblies. The tape is supplied on 50 meter rolls in width 600 mm.
Product Construction
Product
Color
Adhesive Type
Filler Type
Adhesive Thickness*
Release Liner (Face Side)
Release Liner (Back Side)
3M™ Electrically Conductive Acrylic Pad 7805
Yellow
Filled Acrylic
Silver coated particles
0.15 mm
50 µm silicone treated PET film
Transparent and easy release
75 µm silicone treated PET film
Printed and tight release
*Contact
your local 3M sales representative for additional information on thicknesses and width.
3
3M
™
Electrically Conductive Acrylic Pad (eCAP) 7805
Typical Properties
Note:
The following technical information and data should be considered representative or typical only and should not be
used for specification purposes.
3M™ Electrically Conductive Acrylic Pad 7805
Product No.
1
2
7805
0.005
Ω
0.01
Ω
5
Ω
/
1500 gf / inch
1500 gf / inch
14 kg / sq. in.
Test Method
3M TM
3M TM
3M TM
3M TM
3M TM
3M TM
Z-axis Resistance 1 inch x 1 inch
Z-axis Resistance 10 mm x 10 mm
Surface Resistance
90° Peel Adhesion (FS)
90° Peel Adhesion (BS)
3
Compression Stress
1
Z-axis Resistance:
Z-axis Resistance:
Compression Stress:
Measured between gold plated brass probes with 1 kg load.
Contact area: 25.4 mm x 25.4 mm, Dwell time: 60 seconds.
Measured between gold plated brass probes without load.
Contact area: 10 mm x 10 mm, Dwell time: 60 seconds.
Measured at 25% compression (12 mm/min).
2
3
25.4mm
.4m
25
m
1 kg
Probe
(Gold Plated Brass)
Probe
(Gold Plated Brass)
Sample
10mm x 10mm
(2)
3M
™
Electrically Conductive Acrylic Pad (eCAP) 7805
Certification/Recognition
MSDS:
3M has not prepared a MSDS for this product which is not subject to the MSDS requirements of the Occupational
Safety and Health Administration’s Hazard Communication Standard, 29 C.F.R. 1910.1200(b)(6)(v). When used under
reasonable conditions or in accordance with the 3M directions for use, the product should not present a health and safety
hazard. However, use or processing of the product in a manner not in accordance with the directions for use may affect its
performance and present potential health and safety hazards.
TSCA:
This product is defined as an article under the Toxic Substances Control Act and therefore, it is exempt from
inventory listing requirements.
RoHS:
This product complies with the requirements of EU Directive 2002/95/EC and 2005/618/EC.
For Additional Information
To request additional product information or to arrange for sales assistance, call toll free 1-800-251-8634. Address
correspondence to: 3M Electronics Markets Materials Division, Building 21-1W-10, 900 Bush Avenue, St. Paul, MN
55144-1000. Our fax number is 651-778-4244 or 1-877-369-2923. In Canada, phone: 1-800-364-3577. In Puerto Rico,
phone: 1-787-750-3000. In Mexico, phone: 52-70-04-00.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed
to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and
determine if it is suitable for your intended application. You assume all risks and liability associated with such use.
Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements
contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized
officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture at the time of purchase.
3M MAKES NO OTHER
WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the warranty period stated above,
your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M
product.
Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential
loss or damage arising from this 3M product, regardless of the legal theory asserted.
3
Electronics Markets Materials Division
3M Electronics
3M Center, Building 21-1W-10, 900 Bush Avenue
St. Paul, MN 55144-1000
1-800-251-8634 phone
651-778-4244 fax
www.3M.com/electronics
3M is a trademark of 3M Company.
Please recycle. Printed in U.S.A.
© 3M 2009. All rights reserved.
60-5002-0373-6
(3)
3
/201809301748190_pdf/pg_0001.png)
Mobile and portable
京公网安备 11010802033920号
EEWORLD/201809301748190_pdf/1.png)
/201809301748190_pdf/2.png)
/201809301748190_pdf/3.png)
/201809301748190_pdf/pg_0002.png)
