ScotchCode
Data Sheet
Application:
™
STD Tape Dispenser
SDR Wire Marking Tape
ScotchCode
TM
SDR is a polyester film tape with an acrylic
pressure sensitive adhesive, the tape is used in the 3M
STD ScotchCode tape dispenser. From the dispenser, the
user can pull out and tear off the amount of tape needed for
thier particular application such as marking wires, terminal
blocks, panels, ect.
PRODUCT
SDR–0
SDR–1
thru
SDR–9
SDR–0–9
SDR–10–19
thru
SDR–90–99
SDR–A
thru
SDR–Z
SDR–L1
SDR–L2
SDR–L3
SDR–T1
SDR–T2
SDR–T3
SDR + (Plus)
SDR – (Minus)
This tape is also avaibile in ten colors.
Number of Characters
Tape Thickness
Adhesion to Steel
( ASTM D–1000)
Adhesion to Backing
( ASTM D–1000)
6 per inch
(6 per 2,54 cm)
3 mils (0,08mm)
25 oz./inch width
(273 Newtons/Meters)
10 oz./inch width
(109 Newtons/Meters)
Color of Roll
SDR–BK
BLACK
SDR–BL
BLUE
SDR–BN
BROWN
SDR–GN
GREEN
SDR–GY
GRAY
SDR–OR
ORANGE
SDR–RD
RED
SDR–VL
VIOLET
SDR–WH
WHITE
SDR–YL
YELLOW
SDR–MC
*
* Includes one roll of each of the above colors.
STD–0–9
STD–C
STD
dispenser filled with numbers 0 thru 9
dispenser filled with all ten colors
empty dispenser
DESCRIPTION
PRINTING
ON ROLL
0
1
thru
9
1 number/roll
1 number/roll
thru
1 number/roll
A
thru
Z
L1
L2
L3
T1
T2
T3
+
–
ScotchCode
Wire Marking Tape
Tape Technical Data:
(All Values are Typical Values)
Material:
Application Temperature
Range
Operating Temperature
Range
Storage Temperature
(Relative Humidity)
Tape Roll Width
Tape Roll Length
Polyester film with acrylic
pressure sensitive adhesive
32°F to 120°F
(0°C to 49°C)
–40°F to 250°F
(–40°C to 121°C)
80°F (26°C)
25–50%
0.215 inches
(5,46 mm)
96 inches
(2,43 m)
0–9 consecutive
10–19 consecutive
90–99 consecutive
Engineering Specification:
Wire marking tape shall be polyester tape, 3 mils
(0,08mm) thick, with acrylic pressure sensitive adhesive.
The tape will be in a roll 0.215 inches (5,46mm) wide and
96 inches (2,43m) long, wound on a .38 inch (9,65mm)
dia. plastic core. There will be six ( 6 ) characters per inch
of tape. These rolls will be used with 3M ScotchCode STD
tape dispensers and shall be manufactured by 3M.
STD Tape Dispenser
SDR Wire Marking Tape
Important Notice to Purchaser:
All statements, technical information and recommendations related
to the Seller's products are based on information believed to be
reliable, but the accuracy or completeness thereof is not
guaranteed. Before utilizing the product, the user should
determine the suitability of the product for its intended use. The
user assumes all risks and liability whatsoever in connection with
such use.
Any statements or recommendations of the Seller which are not
contained in the Seller's current publications shall have no force or
effect unless contained in an agreement signed by an authorized
officer of the Seller. The statements contained herein are made in
lieu of all warranties expressed or implied, including but not
limited to the implied warranties of merchantability and fitness for
a particular purpose which warranties are hereby expressly
disclaimed.
SELLER SHALL NOT BE LIABLE TO THE USER OR ANY OTHER
PERSON UNDER ANY LEGAL THEORY, INCLUDING BUT NOT
LIMITED TO NEGLIGENCE OR STRICT LIABILITY, FOR ANY
INJURY OR FOR ANY DIRECT OR CONSEQUENTIAL DAMAGES
SUSTAINED OR INCURRED BY REASON OF THE USE OF ANY
OF THE SELLER'S PRODUCTS.
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
Printed on 50% recycled
waste paper, including 10%
post-consumer waste paper.
Litho in USA.
1-4-94
©
3M 1993 80 6104
Industrial Control Electronics
京公网安备 11010802033920号
EEWORLD
