Masking Tape
203
Technical Data
December, 2010
Product Description
3M™ Masking Tape 203 is a general purpose masking tape that can be used for
holding, bundling, sealing and a vast number of other jobs where a pressure-
sensitive tape is needed.
Product Construction
Backing
Crepe Paper
Adhesive
Rubber
Color
Tan
Standard Roll Length
60 yds. (54.9 m)
Typical Physical
Properties
Note: The following technical information and data should be considered representative
or typical only, and should not be used for specification purposes.
IMPORTANT NOTICE:
The following technical data is from tests conducted on samples
taken from limited production data. 3M will continue to test samples from additional
production runs and will issue an updated technical data sheet. 3M recommends you test this
product to make sure it is fit for your particular purpose and suitable for your applications.
ASTM Test Method
Adhesion to Steel:
Tensile Strength:
Elongation at Break:
Tape Thickness:
Temperature Use Range:
30 oz./in. width (32.8 N/100 mm)
20 lbs./in. width (350 N/100 mm)
8.3%
4.7 mils (0.12 mm)
Up to 200°F (93°C) for up to 30 minutes
Removes Cleanly*
D-3330
D-3759
D-3759
D-3652
*Has
been laboratory tested on painted steel panels and found to remove cleanly at bake temperatures
of up to 200°F (93.3°C) for 30 minutes. The actual temperature and time performance may be higher or
lower for a given application. Clean removal can vary dependent on surface type, processing conditions
such as multiple bakes, type of paint involved as well as the temperature of the surface at removal. We
recommend testing the product under your conditions to determine if it meets your needs.
Features
• Tape has been tested and found to meet the requirements of ASTM D 6123 /
D 6123M-97. Can be certified to this standard upon request.
• The rubber adhesive provides good instant adhesion that sticks to a wide variety
of surfaces.
• Good holding power to resist lifting or curling.
• Crepe paper backing that is conformable.
• Backing resists slivering yet is hand tearable.
• Designed for indoor use. Tape may become very difficult to remove if subjected
to prolonged outdoor exposure.
3M
™
Masking Tape
203
Application Ideas
• Holding and bundling for a wide variety of materials.
• Sealing and wrapping applications where a pressure-sensitive tape is needed.
Storage
Store under normal conditions of 70°F (21°C) and 50% R.H. in the original carton.
Shelf Life
To obtain best performance, use this product within one year from date of
manufacture.
Technical Information
The technical information, recommendations and other statements contained in this document are
based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such
information is not guaranteed.
Product Use
Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use
and performance of a 3M product in a particular application. Given the variety of factors that can affect
the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and
determining whether it is fit for a particular purpose and suitable for user’s method of application.
Warranty,
Limited Remedy,
and Disclaimer
Unless an additional warranty is specifically stated on the applicable 3M product packaging or product
literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time
3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY
OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE.
If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s
option, replacement of the 3M product or refund of the purchase price.
Limitation of Liability
Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product,
whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted,
including warranty, contract, negligence or strict liability.
ISO 9001 2008
:
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001: 2008 standards.
Industrial Adhesives and Tapes Division
3M Center, Building 225-3S-06
St. Paul, MN 55144-1000
800-362-3550 • 877-369-2923 (Fax)
www.3M.com/industrial
Recycled Paper
40% pre-consumer
10% post-consumer
3M is a trademark of 3M Company.
Printed in U.S.A.
©3M 2010 70070953677 (12/10)
/201809303321983_pdf/pg_0001.png)
京公网安备 11010802033920号
EEWORLD/201809303321983_pdf/1.png)
/201809303321983_pdf/2.png)
/201809303321983_pdf/pg_0002.png)
