TECHNICAL BULLETIN TB-4013
Blow Vac Vacuum
Operation and Maintenance
Items included with 230V model 35842 & 35843
• 1 Dissipative stretch hose – Extends over 4' or
130cm
• 1 Soft Dissipative Rubber Nozzle
• 1 Hard Dissipative Crevice Nozzle
• 1 Low Charging Carrying Strap
• 5 Stage filtration system installed (Includes 35838
Micromotorfilter with 35339 filterbag)
Optional Accessories
• 35834 Replacement Dissipative Stretch Hose
• 35835 Mini Attachment Set
• 35836 Two-Part Blow Assembly Attachment
• 35837 Replacement HEPA Micromotorfilter
• 35838 Replacement Micromotorfilter
• 35839 Replacement Filterbags, Set of 10
35840
35841
Figure 1:
Menda
®
Blow Vac
Description
The MENDA Blow Vac is a compact, dual function unit
which is totally made up of ESD Safe housing parts
and accessories. It is designed for precise removal
and collection of dry dust particles and debris from
equipment that is sensitive to electrostatic discharge
(ESD). Dissipative thermoplastic rubber stretch hose
with a steel conductive spring wire to remove electrostatic
charges via the dissipative housing and ground wire
plugged into a three-wire AC electrical outlet.
The Blow Vac can also be converted in seconds into a
powerful blower for dust removal in areas otherwise not
accessible. You simply need to attach the optional two
part blow assembly attachment, MENDA Part Number
35836.
The Blow Vac has been specially made with a
dissipative housing and attachments/accessories. All
are groundable per S20.20 <1 x 10
9
Static Dissipative.
Operation
1. Slide one end of the dissipative stretch hose into
suction opening Airflow inlet (vacuum) or Airflow
Outlet (blower).
2. Press the desired nozzle onto the hose end.
3. Install any of the other appropriate attachments
to the other end of the hose. The Two Part Blow
Assembly attachment (35836) is recommended for
use if the Blow Vac will be used to blow debris.
4. Place the rocker switch in off position. For the
adjustable airflow unit further place the knob
electronic control onto the Medium power setting.
5. Plug appliance coupling end of the power cord into
rear power inlet Blow Vac. Plug the 3-pin/blade
power plug into an electrical outlet that is properly
grounded in accordance with all local codes and
ordinances. Start Blow Vac by pressing the power
switch to “ON” position.
Inspection
Remove the Blow Vac from the shipping carton and
inspect for damage.
Items included with 120V model 35840 & 35841
• 1 Dissipative stretch hose – Extends over 4' or
130cm
• 1 Soft Dissipative Rubber Nozzle
• 1 Hard Dissipative Crevice Nozzle
• 1 Low Charging Carrying Strap
• 1 Detachable 13 Amp 8' Power Cord
• 5 Stage filtration system installed (Includes 35838
Micromotorfilter with 35339 filterbag)
Figure 2:
Connecting the hose to the airflow outlet.
3651 Walnut Avenue, Chino, CA 91710
Phone: (909) 627-2453 • Web Site:
MendaPump.com
TB-4013
July 2016 Page 1 of 3
© 2016 DESCO INDUSTRIES INC.
Employee Owned
4. Remove and dispose the paper filterbag (35839) and
replace it with a new one.
5. Replace the micromotorfilter (35838) after
approximate 5 times of changing the filterbag
(35839).
Figure 3:
Connecting the hose to the airflow inlet.
Filter Change-Out Instructions
To retain dust and fine dry particles down to 0.3 micron,
the Blow Vac is fitted with a special double-layer
paper filter bag, combined with an electro-static
charged micro filter. If there is substantial loss of
suction and/or blow pressure, follow the below steps:
1. Switch-Off appliance and disconnect plug from
electrical outlet.
2. Verify the nozzle or hose have not become
blocked.
3. Lift the metal lock on the bottom of the Blow Vac
and remove the front cover.
Figure 5:
Removing and Changing the Filter
Safety Warning
•
•
•
•
•
•
The Blow Vac is designed for indoor use and should
be stored in a dry place.
It is NOT designed to collect liquids, or health
endangered dust such as asbestos.
Unplug the Blow Vac when it is not in use.
Never use the appliance without the paper filterbag
(35839) and micromotorfilter (35838) in place.
Thermal Protection - Automatic Shut-Off
Not recommended for use for toner pick up.
Figure 4:
Releasing the Filter
3651 Walnut Avenue, Chino, CA 91710
Phone: (909) 627-2453 • Web Site:
MendaPump.com
TB-4013
Page 2 of 3
© 2016 DESCO INDUSTRIES INC.
Employee Owned
Specifications
Construction:
Motor:
Energy Consumption:
Suction:
Weight:
Size:
Speed:
Filter Bag:
Durable and highly solvent resistant Volume Dissipative Polypropylene housing
1.15 Horsepower
850 Watts with 1300 Watt “Performance Level”
80 W.G. (measured at orifice motor)
4.8 lbs
12.5" x 5" x 7.5"
Option 1) Simple bleeding valve – 35840
Option 2) Stepless electronic regulator – Adjustable 35841
Advanced 5 - Stage Filter System
Replace filterbag approximately 5 times before having to change micromotorfilter.
HEPA (Pre-Moto) micromotorfilter
1.2 Liter Multilayer Filter Bag
Dissipative thermoplastic rubber stretch hose
Dissipative soft rubber snorkel nozzle
Dissipative hard crevice tool
Low Charging leather shoulder strap
Hose:
Nozzle:
Tools:
Accessories:
All electrical components are CSA and UL certified.
CAN/CSA – C22.2 No. 243-M91
UL Std. No. 1017. RFI/EMC Filter Equipped
Made in the Netherlands
Limited Warranty
Menda expressly warrants that for a period of one (1) year from the date of purchase, Menda Blow Vacs will be free of defects in material
(parts) and workmanship (labor). Within the warranty period, the product will be tested, repaired, or replaced at Menda’s option, free
of charge. Call our Customer Service Department at 909-627-2453 for a Return Material Authorization (RMA) and proper shipping
instructions and address. Include a copy of your original packing slip, invoice, or other proof of purchase date. Any unit under warranty
should be shipped prepaid to the Menda factory. Warranty repairs will take approximately two weeks.
If your unit is out of warranty, call Customer Service at 909-627-2453 for a Return Material Authorization (RMA) and proper shipping
instructions and address. Menda will quote repair charges necessary to bring your unit up to factory standards.
Warranty Exclusions
THE FOREGOING EXPRESS WARRANTY IS MADE IN LIEU OF ALL OTHER PRODUCT WARRANTIES, EXPRESSED AND IMPLIED,
INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH ARE SPECIFICALLY DISCLAIMED. The
express warranty will not apply to defects or damage due to accidents, neglect, misuse, alterations, operator error, or failure to properly
maintain, clean or repair products.
Limit of Liability
In no event will Menda or any seller be responsible or liable for any injury, loss or damage, direct or consequential, arising out of the use
of or the inability to use the product. Before using, users shall determine the suitability of the product for their intended use, and users
assume all risk and liability whatsoever in connection therewith.
3651 Walnut Avenue, Chino, CA 91710
Phone: (909) 627-2453 • Web Site:
MendaPump.com
TB-4013
Page 3 of 3
© 2016 DESCO INDUSTRIES INC.
Employee Owned
京公网安备 11010802033920号
EEWORLD
