* See Page 9 for additional developed frequencies.
Check with factory for availability of frequencies not listed.
Description
CTS Model 653 is a low cost, high performance clock oscillator supporting differential LVPECL or LVDS outputs.
Employing the latest IC technology, M653 has excellent stability and very low jitter/phase noise performance.
Ordering Information
Model
653
Output
Type
P
Frequency Code
[MHz]
XXX or XXXX
Frequency
Stability
3
Temperature
Range
I
Supply
Voltage
3
Packaging
T
Code
P
L
E
V
Output
LVPECL - Pin 1 Enable
LVDS - Pin 1 Enable
LVPECL - Pin 2 Enable
LVDS - Pin 2 Enable
Code
6
5
3
2
Stability
±20ppm
±25ppm
±50ppm
±100ppm
2
Code
2
3
Voltage
+2.5Vdc
+3.3Vdc
Code
Frequency
Product Frequency Code
1
Code Temp. Range
-10°C to +60°C
A
-20°C to +70°C
C
-40°C to +85°C
I
Packing
Code
1k pcs./reel
T
Notes:
1] Refer to document 016-1454-0, Frequency Code Tables. 3-digits for frequencies <100MHz, 4-digits for frequencies 100MHz or greater.
2] Consult factory for availability of 6I Stability/Temperature combination.
Not all performance combinations and frequencies may be available.
Contact your local CTS Representative or CTS Customer Service for availability.
This product is specified for use only in standard commercial applications. Supplier disclaims all express and implied warranties and liability in connection with any use of this
product in any non-commercial applications or in any application that may expose the product to conditions that are outside of the tolerances provided in its specification.
[i=s]This post was last edited by paulhyde on 2014-9-15 09:35[/i] My program suddenly stopped running during operation, and I found that the 8M crystal oscillator did not start. In order to find out t...
[align=left][color=#333333][font=Arial, Microsoft YaHei][size=14px]I am learning an LED shutdown circuit. The circuit uses a MOS switch to shut off the negative pole of the LED. I have a few questions...
[i=s] This post was last edited by niguangyixia on 2018-12-5 10:41[/i] [font="][size=14px]Help needed:[/size][/font] [font="][size=14px]The serial port interrupts of routine 6657 have been adjusted by...
A signal to another clock domainLet's say a signal from clkA domain is needed in clkB domain. It needs to be "synchronized" to clkB domain, so we want to build a "synchronizer" design, which takes a s...
I used CYCLONEIII chip, customized DDR2 IP core, and then used SINALTAP to capture signals directly. I found that the reason for the failure to read and write was that local_init_done was always low, ...
[i=s]This post was last edited by eXiaoqiang2013 on 2015-11-29 22:58[/i] [color=#999999]Cyclone V Series Chinese Datasheet, official Chinese datasheet collection, with bookmarks. Contains three volume...
This program is written to simulate the serial port hardware mechanism. When used, a timed interrupt can be set with a time interval of 1/4 baud rate. The receiving function is called once for ea...[Details]
System design is a complex process. It is not enough to just use ICs. There are many details to consider. This article uses a high-fidelity music playback system as an example to introduce how to s...[Details]
DSP (digital signal processor) is used more and more frequently in today's engineering applications. There are three main reasons for this: first, it has powerful computing power and is capable of ...[Details]
The automotive lighting and signal control system is responsible for controlling the vehicle's lighting, signal lights, electric horns, reversing and brake buzzers. Traditional automotive lighting...[Details]
Smart lighting control systems provide high controllability for various buildings and further enhance the level of green energy. They are the core products of energy conservation and digital techn...[Details]
With the continuous consumption of earth's energy and the scarcity of resources, the harm of greenhouse effect to human beings, and the serious pollution of the atmosphere to the earth, the intern...[Details]
The typical fault troubleshooting listed below is for reference of maintenance personnel.
When the computer is turned on, the indicator light is off and there is no screen display
Mainte...[Details]
The traditional display screen using 51 single-chip microcomputer to control LED dot matrix has relatively simple functions. If it is to achieve diversified functions, it often takes a lot of time ...[Details]
FPGAs are used in 81% of electronic systems, including many commercial and defense products, and most FPGAs use BGA packaging. The BGA packaging is characterized by small solder balls and small sol...[Details]
0 Introduction
High-precision current source can provide high-precision current supply for precision instruments, and is suitable for automatic measurement tasks of various resistors in semico...[Details]
In the "digital pressure measurement" experimental device of applied physics, the subject technical knowledge of analog circuits, digital circuits, sensors and single-chip microcomputers is used. In o...[Details]
1 Introduction to LED
With the development of science and technology, people have higher and higher requirements on automobile light sources. LED (Light Emitting Diode) has gradually attracted...[Details]
People who often surf the Internet until late at night, their families always complain that turning on the big lights in the living room affects their rest, but some people don't have keyboard ligh...[Details]
The production process of lithium batteries does not mention the previous processes such as material preparation, winding, liquid injection, and packaging, but only talks about the final formation ...[Details]
Direct digital frequency synthesis (DDS) has fast frequency switching and modulation capabilities and is widely used. However, when low power consumption and low cost are the main considerations, D...[Details]
Electronics Design Contest
京公网安备 11010802033920号
EEWORLD
