ABRIDGED DATA SHEET
EVALUATION KIT AVAILABLE
MAX16970/MAX16971
3A Automotive Hi-Speed USB Protectors with
Apple iPhone/iPad and USB 2.0 Charge Detection
Benefits and Features
General Description
The MAX16970/MAX16971 provide high-ESD and short-
circuit protection for the low-voltage internal USB data
and USB power line in automotive radio, navigation,
connectivity, and USB hub applications. The devices sup-
port both Hi-Speed USB (480Mbps) and full-speed USB
(12Mbps) operation. In addition, the devices also include
integrated circuitry to enable fast-charging for consumer
devices adhering to either the Apple method or the
Hi-Speed USB host-charger port-detection protocol and
support USB On-The-Go (OTG).
The short-circuit protection features include short-to-bat-
tery on the protected HVBUS, HVD+, and HVD- outputs,
as well as short-to-HVBUS on the protected HVD+ and
HVD- outputs. The devices are capable of a short-to-bat-
tery condition of up to +18V. Short-to-GND and overcur-
rent protection are also provided on the HVBUS output to
protect the internal BUS power rail from overcurrent faults.
Each device features high-ESD protection to ±15kV Air
Gap method and ±8kV Contact method on all protected
HVBUS, HVD+, and HVD- outputs.
Each device features two low 4.0Ω on-resistance Hi-Speed
USB switches, a current-limited low-voltage 31mΩ BUS
switch, and provides an integrated high-voltage external
power-switch controller. The BUS switch can start up into
large capacitive noncompliant USB loads. The devices
also feature an enable input, a fault output, integrated
Apple iPhone
®
/iPad
®
fast-charging termination resis-
tors, and an integrated host-charger port-detection circuit
adhering to the USB 2.0 battery charging specification
version 1.2.
The devices are available in 16-pin QSOP and
16-pin (4mm x 4mm) TQFN packages and oper-
ate over the -40°C to +105°C temperature range. The
MAX16970GEEA/ V+ and MAX16971GEEA/V+ are drop-in
compatible with MAX16969DGEE/V+ and MAX16969BGEE/
V+, respectively.
●
Minimized Voltage Drop on Bus Line Due to Industry-
Leading RDS
(ON)
Helps Meet USB
Voltage Specifications at Device Connector
•
Current-Limited 31mΩ (typ) BUS Switch with High-
Capacitive Load Capability
●
Robust Overvoltage and ESD Protection for
Automotive Environment Saves on External
Protection Components
• Short-to-Battery and Short-to-GND Protection on
Protected HVBUS Output
• Short-to-Battery and Short-to-HVBUS Protection
on Protected HVD+ and HVD- Outputs
•
Two 4.0Ω (typ) R
ON
USB 2.0 Data Switches
• Integrated Overcurrent and Short-Circuit Autoretry
• High ESD Protection (HVD+, HVD-, HVBUS)
• ±15kV Human Body Model
• ±15kV IEC 61000-4-2 Air Gap
• ±8kV IEC 61000-4-2 Contact
• 20ms Fault-Blanking Timeout Period
●
Automatic Transitioning of Charge Modes Through
Intelligent State Machine for Seamless Device
Integration
• Integrated Apple iPhone 1.0A Dedicated Charging
Mode
• Integrated Apple iPad 2.1A Dedicated Charging
Mode
• USB-IF BC1.2 Charging Downstream Port (CDP)
and Dedicated Charging Port (DCP) Modes
• Chinese Telecommunication Industry-Standard
YD/T 1591-209
• USB On-The-Go (OTG) Support
●
Drop-In Pin Compatibility with MAX16919/MAX16969
in 16-Pin QSOP Package
●
AEC-Q100 Qualified
Applications
●
●
●
●
Automotive Radio and Navigation
USB Hub
Automotive Connectivity
Telematics
Typical Operating Circuit
and
Ordering Information
appear
at end of data sheet.
iPhone and iPad are registered trademarks of Apple, Inc.
19-6819; Rev 4; 9/16
ABRIDGED DATA SHEET
MAX16970/MAX16971
3A Automotive Hi-Speed USB Protectors with
Apple iPhone/iPad and USB 2.0 Charge Detection
Typical Operating Circuit
3.3V USB
I/O VOLTAGE
0Ω
IN
FAULT
CONTROL
AND
DIAGNOSTICS
COMMON-MODE
CHOKE PLACEMENT
HVD-
CHEN
EN
ISET
D-
R
ISET
0.1µF
100kΩ
10µF
V I/O
LOW-VOLTAGE
µC OR ASIC
WITH INTEGRATED
USB TRANSCEIVER
D-
D-
USB D+
CONNECTOR
VBUS
GND
0.1µF
1Ω
10µF
100nF
HVD+
D+
+5V MAIN
SYSTEM POWER
D+
S_DMOS
BUS
0.1µF
100µF
G_DMOS
HVBUS
FET CHARGE
PUMP
GND
MAX16970
Ordering Information
PART
PIN-PACKAGE
ENABLE INPUT LOGIC
SUPPORTED MODES
MAX16970GEEA/V+
16 QSOP
Low
1A/DCP
MAX16970GEEB/V+
16 QSOP
Low
1A/2.1A/DCP, OTG
MAX16970GTEB/V+
16 TQFN-EP*
Low
1A/2.1A/DCP, OTG
MAX16971GEEA/V+
16 QSOP
High
1A/DCP
MAX16971GEEB/V+
16 QSOP
High
1A/2.1A/DCP, OTG
MAX16971GTEB/V+
16 TQFN-EP*
High
1A/2.1A/DCP, OTG
Note:
All devices operate over the -40°C to +105°C temperature range and support CDP/HS modes.
/V denotes an automotive qualified part.
+Denotes a lead(Pb)-free/RoHS-compliant package.
*EP
= Exposed pad.
Chip Information
PROCESS: BiCMOS
Package Information
For the latest package outline information and land patterns
(footprints), go to
www.maximintegrated.com/packages.
Note
that a “+”, “#”, or “-” in the package code indicates RoHS status
only. Package drawings may show a different suffix character, but
the drawing pertains to the package regardless of RoHS status.
PACKAGE
TYPE
16 QSOP
16 TQFN
PACKAGE
CODE
E16+11C
T1644+4C
OUTLINE
NO.
21-0055
21-0139
LAND
PATTERN NO.
90-0167
90-0070
www.maximintegrated.com
Maxim Integrated
│
2
ABRIDGED DATA SHEET
MAX16970/MAX16971
3A Automotive Hi-Speed USB Protectors with
Apple iPhone/iPad and USB 2.0 Charge Detection
Revision History
REVISION
NUMBER
0
1
2
3
4
REVISION
DATE
9/13
5/14
1/15
2/15
9/16
Initial release
Updated current-limited BUS switch value in
General Description, Features,
and
Detailed Description
sections; removed future product references from
Ordering
Information;
updated EC table limits for
Bus Power On-Resistance,
based on new
character data taken with copper wires
Updated package codes in
Package Information
table
Updated the
Benefits and Features
section; removed future product designations from
Ordering Information
Corrected TQFN pin 12 name (from BUS to IN) in
Pin Configurations
DESCRIPTION
PAGES
CHANGED
—
1, 4, 19
27
1
17
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated’s website at www.maximintegrated.com.
Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses
are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max limits)
shown in the Electrical Characteristics table are guaranteed.
Other parametric values quoted in this data sheet are provided for guidance.
Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc.
© 2016 Maxim Integrated Products, Inc.
│
3
stm32/stm8
京公网安备 11010802033920号
EEWORLD
