ARINC 600 Rack and Panel Connectors
Available Rear Release/Rear Removable
Front Release/Front Removable
Low Insertion force contacts.
Both environmental and non-environmentl
versions.
Polarizing post that are removable from the
mating face.
Field replaceble inserts.
Up to 150 Size #22 contacts per connector.
Crimp, coax, twinax, printed circuit and wire
wrappable post style contacts.
Uses standard ARINC 600, crimp, insertion/
extraction tooling.
SGA
SGA
connectors utilize all the Signal cavity inserts and contacts from the ARINC 600 connector series. It was designed to be used where there are space
constraints in which a standard ARINC 600 connector can not be used. ITT Cannon's SGA connector fills the need for a 150 maximum contact connector with a
smaller shell design than Shell Size 2 of ARINC 600, and has more contacts available than single gang DPX with 106 Size 22 contacts.
Materials and Finishes
SGA*D
Material
Shell
Insulator
Finish
Material
Material
Contacts
Finish
Termination
Grommets/Seals
O-Ring
Material
Material
Aluminum alloy
Clear chromate over cadmium
Thermoplastic
Copper alloy
Gold
Crimp
N/A
N/A
SGA*E
Aluminum alloy
Clear chromate over cadmium
Thermoplastic
Copper alloy
Gold
Crimp
Silicone-based Elastomer
Silicone-based Elastomer
SGA*F
Aluminum alloy
Clear chromate over cadmium
Thermoset
Copper alloy
Gold
P.C/Wrap Post
N/A
N/A
Specifications
QQ-A-591/A380
QQ-P-416
N/A
QQ-C-533
MIL-G-45204
N/A
N/A
N/A
How to Order (Refer to ARINC 600 [BKA] pages 13-16 for contact information.)
SGA
CONNECTOR SERIES
CONNECTOR SERIES
SHELL STYLE
CLASS
CONTACT ARRANGEMENT
CONTACT TYPE (PIN OR SOCKET)
CONNECTOR MOUNTING MODIFIER
POLARIZING POSITION
CONTACT MODIFIER
3
F
150
S
00
01
FO
SGA (Single Gang ARINC 600)
SHELL STYLE
3 - Plug (Rack Side)
4 - Receptacle (Box Side)
CLASS
C - Non-environmental with Grommet only, insula-
tors are not potted into the connector shell.
D - Non-environmental (rear relase crimp con-
tacts).
E - Environmentally sealed (rear release crimp
contacts).
F - Non-environmental (front release, printed cir-
cuit or wire wrap posts).
R - EMI/RFI Protected & Environmentally sealed,
0-ring omitted (plug only). (Reference ITTC
Phoenix)
CONTACT ARRANGEMENT
(See ARINC 600 (BKA) contact arrangements,
pages 9-10)
CONTACT TYPE
P - Pin Contacts
S - Socket Contacts
CONNECTOR MOUNTING MODIFIER
Mounting modifiers 00, 03, 06, 14, 15, hole location
is .705 basic from connector vertical centerline.
00 - .151 Dia. Mounting holes.
03 - .156 with #4-40 Self-Locking Clinch Nuts
(ESNA #22NCFMA2-40) 4 per connector.
06 - .188 Dia. For #6-32 Clinch nuts (ESNA
#12NCFMA2-62) 4 per connector.
14 - .137 Dia, Countersunk 82 x .230 Dia.,
Engaging face of mounting flange.
15 - .137 Dia, Countersunk 82 x .230 Dia.,
Engaging face of mounting flange. Supplied
with slant shield grounding spring.
Mounting modifiers 05, 07, 08, 09, 10, 11, 12, 13,
hole location is .650 basic from connector vertical
centerline.
05 - .208 Dia. for Floating Eyelet
07 - .212/.204 Slot 4 places.
08 - .120 Dia. Countersunk 82 x .230 Dia.,
Engaging face of mounting flange.
09 - .120 Dia. Countersunk 82 x .230 Dia., Rear
face of mounting flange.
10 - .120 Dia. Countersunk 100 x .230 Dia.,
Engaging face of mounting flange.
11 - .120 Dia. Countersunk 100 x .230 Dia.,
Rear face of mounting flange.
12- .137 Dia. Countersunk 82 x .230 Dia.,
Engaging face of mounting flange.
13- .137 Dia. Countersunk 82 x .230 Dia., Rear
face of mounting flange.
POLARIZING POSITION
CONTACT MODIFIER
01 - 36 Positions. (See Chart page 24)
When the last two digits are omitted, the
polarizing posts will not be assembled and
position number is not stamped on the connec-
tor. This allows the user to position the post
and stamp the appropriate number on the
shell. If the last two digits are "00", polariz-
ing posts are not supplied with the connector.
Refer to page 13 for replacement contact part num-
bers and required termination tooling information.
(Blank) - With standard Crimp type Rear release
contacts.
F0 - Contacts are not supplied with connector
(FO not stamped on connector.)
SA - Front release .025 Dia. x .150 Solder Post
Size 22 Sockets
SB - Front release .025 Dia. x .250 Solder Post
Size 22 Sockets
SC - Front release .025 Dia. x .375 Solder Post
Size 22 Sockets
SD - Front release .025 Dia. x .500 Solder Post
Size 22 Sockets
WA - Front release .025 Sq. x .250 (1 Wrap)
WB - Front release .025 Sq. x .375 (2 Wrap)
WC - Front release .025 Sq. x .500 (3 Wrap)
WD - Front release .025 Sq. x .641 (3 Wrap)
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
Analogue and Mixed Signal
京公网安备 11010802033920号
EEWORLD
