EEWORLDEEWORLDEEWORLD

Part Number

Search

24LCS52-I/P

Description
Electrically Erasable Programmable Read Only Memory 256x8 - 2.5V
Categorystorage    storage   
File Size226KB,25 Pages
ManufacturerMicrochip
Websitehttps://www.microchip.com
Environmental Compliance
Download Datasheet Download user manual Parametric View All

24LCS52-I/P Overview

Electrically Erasable Programmable Read Only Memory 256x8 - 2.5V

24LCS52-I/P Parametric

Parameter NameAttribute value
Is it lead-free?Lead free
Is it Rohs certified?conform to
Parts packaging codeDIP
package instruction0.300 INCH, LEAD FREE, PLASTIC, MS-001, DIP-8
Contacts8
Reach Compliance Codecompliant
ECCN codeEAR99
Factory Lead Time13 weeks
Other features1000K ERASE/WRITE CYCLES; HARDWARE WRITE PROTECT; DATA RETENTION > 200 YEARS
Maximum clock frequency (fCLK)0.4 MHz
Data retention time - minimum200
Durability1000000 Write/Erase Cycles
I2C control byte1010DDDR
JESD-30 codeR-PDIP-T8
JESD-609 codee3
length9.46 mm
memory density2048 bit
Memory IC TypeEEPROM
memory width8
Number of functions1
Number of terminals8
word count256 words
character code256
Operating modeSYNCHRONOUS
Maximum operating temperature85 °C
Minimum operating temperature-40 °C
organize256X8
Package body materialPLASTIC/EPOXY
encapsulated codeDIP
Encapsulate equivalent codeDIP8,.3
Package shapeRECTANGULAR
Package formIN-LINE
Parallel/SerialSERIAL
Peak Reflow Temperature (Celsius)NOT APPLICABLE
power supply2.5/5 V
Certification statusNot Qualified
Maximum seat height4.32 mm
Serial bus typeI2C
Maximum standby current0.000001 A
Maximum slew rate0.003 mA
Maximum supply voltage (Vsup)5.5 V
Minimum supply voltage (Vsup)2.2 V
Nominal supply voltage (Vsup)5 V
surface mountNO
technologyCMOS
Temperature levelINDUSTRIAL
Terminal surfaceMatte Tin (Sn)
Terminal formTHROUGH-HOLE
Terminal pitch2.54 mm
Terminal locationDUAL
Maximum time at peak reflow temperatureNOT APPLICABLE
width7.62 mm
Maximum write cycle time (tWC)5 ms
write protectHARDWARE/SOFTWARE
Base Number Matches1
24AA52/24LCS52
2K 2.2V I
2
C
Serial EEPROM with Software Write-Protect
Features
• Single supply with operation down to 1.8V
• Low-power CMOS technology
- 1 mA active current typical
- 1
µA
standby current typical (I-temp)
• Organized as 1 block of 256 bytes (256 x 8)
• Software write protection for lower 128 bytes
• Hardware write protection for entire array
• 2-wire serial interface bus, I
2
C™ compatible
• Schmitt Trigger inputs for noise suppression
• Output slope control to eliminate ground bounce
• 100 kHz (24AA52) and 400 kHz (24LCS52)
compatibility
• Self-timed write cycle (including auto-erase)
• Page write buffer for up to 16 bytes
• 3.5 ms typical write cycle time for page write
• ESD protection > 4,000V
• 1,000,000 erase/write cycles
• Data retention > 200 years
• 8-lead PDIP, SOIC, TSSOP and MSOP package
• Standard and Pb-free finishes available
• Available for extended temperature ranges:
- Industrial (I): -40°C to +85°C
Description
The Microchip Technology Inc. 24AA52/24LCS52
(24XX52*) is a 2 Kbit Electrically Erasable PROM
capable of operation across a broad voltage range
(1.8V to 5.5V). This device has a software write-protect
feature for the lower half of the array, as well as an
external pin that can be used to write-protect the entire
array. The software write-protect feature is enabled by
sending the device a special command. Once this
feature has been enabled, it cannot be reversed. In
addition to the software protect feature, there is a WP
pin that can be used to write-protect the entire array,
regardless of whether the software write-protect
register has been written or not. This allows the system
designer to protect none, half or all of the array,
depending on the application. The device is organized
as one block of 256 x 8-bit memory with a 2-wire serial
interface. Low voltage design permits operation down
to 1.8V, with standby and active currents of only 1
µA
and 1 mA respectively. The 24XX52 also has a page
write capability for up to 16 bytes of data. The 24XX52
is available in the standard 8-pin PDIP, surface mount
SOIC, TSSOP and MSOP packages.
Block Diagram
A0 A1 A2
WP
HV Generator
Software write
protected area
(00h-7Fh)
Standard
Array
SDA SCL
V
CC
V
SS
Write-Protect
Circuitry
YDEC
Sense Amp.
R/W Control
Device Selection Table
Part
Number
24AA52
24LCS52
Note 1:
V
CC
Range
1.8-5.5
2.2-5.5
Max Clock
Frequency
400 kHz
(1)
400 kHz
Temp
Ranges
I
I
I/O
Control
Logic
Memory
Control
Logic
XDEC
100 kHz for V
CC
<2.5V
Package Types
PDIP/SOIC/TSSOP/MSOP
A0
A1
A2
V
SS
1
24XX52
2
3
4
8
7
6
5
V
CC
WP
SCL
SDA
*24XX52 is used in this document as a generic part number for the 24AA52/24LCS52 devices.
2003 Microchip Technology Inc.
DS21166G-page 1
TI Energy Harvesting Solutions: Truly Efficient Nanoscale Power Solutions
[font=verdana][size=12px][color=#000000]As more and more household products begin to move from microwatts to milliwatts of power consumption, Niranjan will show you in this video the industry's most e...
qwqwqw2088 Analogue and Mixed Signal
Does pxa270 need a driver to connect to pc via usb?
I set up a USB connection for my pxa270 wince and then connected it to my pc using USB. It prompted that a driver was needed. Where can I get this driver? Thanks...
wc9872 Embedded System
How can I quickly get started in the communications industry?
I came into contact with the communications industry, but I don’t know much about some professional knowledge. Many hardware designs of the projects are completed by the masters. I really want to part...
gurou1 RF/Wirelessly
Android's first system with layered components as its main new content
I have read the introduction of Android. Under the large market application of mobile phones, a layer of software developed for smart phones is also equivalent to the system. This is similar to the em...
qushaobo Linux and Android
GPRS module
When I buy a GPRS module, will it come with a host computer software? Can I connect the serial port to the GPRS module board and then use the PC to send SMS or MMS?...
yelanghijie Embedded System
When the 51 serial port self-transmits and receives, is TI set before RI when an interrupt occurs? Why?
In PROTEUS, directly connect the RXD and TXD pins, and simulate with Keil in mode 1. The result is that after the TXD pin sends 8 bits of data to its own RXD, TI is set about 0.06ms earlier than RI, c...
zhaomg 51mcu

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 812  1375  861  2741  2537  17  28  18  56  52 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号