IQ Switch
®
ProxFusion
®
Series
IQS621EV04 Overview
Combination sensor with ambient light sensing (ALS), capacitive proximity/touch,
Hall-effect sensor & inductive sensing capabilities
The IQS621 ProxFusion
®
IC is a multifunctional, ambient light sensing (ALS), capacitance,
Hall-effect & inductance sensor designed for applications where any or all of the
technologies may be required. The IQS621 is an ultra-low power solution designed for short
or long term activations through any of the sensing channels. The IQS621 is fully I
2
C
compatible.
EV-Kit Overview
Inductive sensing
Hall-effect sensing
Capacitive sensing
Ambient light sensing (ALS)
Evaluation Modes
Connect to PC GUI via CT210A USB Dongle
(included in the EV04 Kit)
When connected to CT210A use 3.3V (default) only
2
o
Raw info displayed in GUI
Please ensure Shield Board
3
is unplugged from
Arduino Uno / ST Nucleo when connected to CT210A
Plug into Arduino Uno
1
or ST Nucleo
1
IQS621EV04 Shield Board
o
Sensor info displayed on 7-segment
o
Open source code for custom development
Embed the small module PCB (stamp) into custom design
& interface to host MCU
(Additional modules sold separately as IQS621EV01)
IQS621 Shield + Arduino Uno
1
Detachable
Stamp Module
Applications
Mobile electronics (phones/tablets)
Home automation & lighting control
White goods and appliances
Wearable devices
1
2
Human Interface Devices
Aftermarket automotive
4
Sold separately
1.8V not supported on Shield Board due to
diode protection
3
Shield Board does not support programming
4
The part is not automotive qualified
Copyright © Azoteq 2018
All Rights Reserved
IQS621EV04 Overview
Revision 1.01
Page 1 of 1
April 2018